Научни чланци

2024

Dinić, I.; Vuković, M.; Rabanal, M. E.; Milošević, M.; Bukumira, M.; Tomić, N.; Tomić, M.; Mančić, L.; Ignjatović, N. Temperature Sensing Properties of Biocompatible Yb/Er-Doped GdF3 and YF3 Mesocrystals. Journal of Functional Biomaterials 2024, 15 (1), 6. https://doi.org/10.3390/jfb15010006.

Divilov, S.; Eckert, H.; Hicks, D.; Oses, C.; Toher, C.; Friedrich, R.; Esters, M.; Mehl, M. J.; Zettel, A. C.; Lederer, Y.; Zurek, E.; Maria, J.-P.; Brenner, D. W.; Campilongo, X.; Filipović, S.; Fahrenholtz, W. G.; Ryan, C. J.; DeSalle, C. M.; Crealese, R. J.; Wolfe, D. E.; Calzolari, A.; Curtarolo, S. Disordered Enthalpy–Entropy Descriptor for High-Entropy Ceramics Discovery. Nature 2024, 625 (7993), 66–73. https://doi.org/10.1038/s41586-023-06786-y.

Filipović, S.; Obradović, N.; Fahrenholtz, W.; Smith, S.; Mirković, M. M.; Peleš Tadić, A.; Petrović, J.; Đorđević, A. Spark Plasma Sintering of Magnesium Titanate Ceramics. Ceramics International 2024. https://doi.org/10.1016/j.ceramint.2024.02.004.

Milić, M.; Jović Orsini, N.; Marković, S. CA and/or EDTA Functionalized Magnetic Iron Oxide Nanoparticles by Oxidative Precipitation from FeCl2 Solution: Structural and Magnetic Study. Journal of Physics D: Applied Physics 2024, 57 (2), 025001. https://doi.org/10.1088/1361-6463/acff06.

Mitrašinović, A.; Nešković, J.; Polavder, S.; Petković, S.; Praštalo, Ž.; Labus, N.; Radosavljević, M. Modeling of Impurities Evaporation Reaction Order in Aluminum Alloys by the Parametric Fitting of the Logistic Function. Materials 2024, 17 (3), 728. https://doi.org/10.3390/ma17030728.

Popović, M.; Novaković, M.; Pjević, D. J.; Vaňa, D.; Jugović, D.; Tošić, D.; Noga, P. Investigating on the Microstructure and Optical Properties of Au, Ag and Cu Implanted TiN Thin Films: The Effects of Surface Oxidation and Ion-Induced Defects. Journal of Alloys and Compounds 2024, 976, 173046. https://doi.org/10.1016/j.jallcom.2023.173046.

Popović Maneski, L. Non-Invasive Functional Electrical Stimulation in Rehabilitation Engineering. In Advances in Biomedical and Veterinary Engineering. BioMedVetMech 2022; Springer, Cham, 2024; pp 46–52. https://doi.org/10.1007/978-3-031-42243-0_4.

Radan, M.; Ćujić Nikolić, N.; Kuzmanović Nedeljković, S.; Mutavski, Z.; Krgović, N.; Stević, T.; Marković, S.; Jovanović, A.; Živković, J.; Šavikin, K. Multifunctional Pomegranate Peel Microparticles with Health-Promoting Effects for the Sustainable Development of Novel Nutraceuticals and Pharmaceuticals. Plants 2024, 13 (2), 281. https://doi.org/10.3390/plants13020281.

Radonjić, A.; Vujičić, V. Integer Codes Correcting/Detecting Burst Errors within One Byte and Detecting Burst Errors within Two Bytes. Computational and Applied Mathematics 2024, 43 (2). https://doi.org/10.1007/s40314-023-02435-2.

 

2023

Aleksić, S.; Obradović, N.; Mitrović, N. S.; Luković, M. D. Characterization of NTC Thick Film Thermistor Paste Cu0.2Ni0.5Zn1.0Mn1.3O4. Science of Sintering 2023. https://doi.org/10.2298/SOS230608036A.

Atanasoski, V.; Petrovic, J.; Popović Maneski, L.; Miletić, M.; Babić, M.; Nikolić, A.; Panescu, D.; Ivanović, M. D. A Database of Simultaneously Recorded ECG Signals with and without EMG Noise. IEEE Open Journal of Engineering in Medicine and Biology 2023, 4, 222–225. https://doi.org/10.1109/OJEMB.2023.3330295.

Batinić, P. M.; Đorđević, V.; Obradović, N. S.; Krstić, A. D.; Stevanović, S.; Balanč, B.; Marković, S.; Pjanović, R.; Mijin, D.; Bugarski, B. Polymer‐lipid Matrice Based on Carboxymethyl Cellulose/Solagum and Liposomes for Controlled Release of Folic Acid. European Journal of Lipid Science and Technology 2023, 125 (7), 2200169. https://doi.org/10.1002/ejlt.202200169.

Biliškov, N.; Milanović, I.; Milović, M.; Takats, V.; Erdelyi, Z. Ammonia Borane Assisted Mechanochemical Boost of Electrochemical Performance of Basal Planes of MoS2-Type Materials. Journal of Alloys and Compounds 2023, 945, 169293. https://doi.org/10.1016/j.jallcom.2023.169293.

Canullo, L.; Rakic, M.; Corvino, E.; Burton, M.; Krumbeck, J. A.; Chittoor Prem, A.; Ravidà, A.; Ignjatović, N.; Sculean, A.; Menini, M.; Pesce, P. Effect of Argon Plasma Pre-Treatment of Healing Abutments on Peri-Implant Microbiome and Soft Tissue Integration: A Proof-of-Concept Randomized Study. BMC Oral Health 2023, 23 (1). https://doi.org/10.1186/s12903-023-02729-1.

Corlett, C. A.; Obradović, N.; Watts, J. L.; Bohannan, E. W.; Fahrenholtz, W. G. Synthesis, Densification, and Cation Inversion in High Entropy (Co,Cu,Mg,Ni,Zn)Al2O4 Spinel. Journal of Asian Ceramic Societies 2023, 11 (3), 330–337. https://doi.org/10.1080/21870764.2023.2227535.

Ćujić Nikolić, N.; Žilić, S.; Simić, M.; Nikolić, V.; Živković, J.; Marković, S.; Šavikin, K. Microencapsulates of Blue Maize Polyphenolics as a Promising Ingredient in the Food and Pharmaceutical Industry: Characterization, Antioxidant Properties, and In Vitro-Simulated Digestion. Foods 2023, 12 (9), 1870. https://doi.org/10.3390/foods12091870.

Djinovic, Z.; Tomic, M. Fiber-Optic Microfluidic Platform for Refractive Index Measurement of Liquids and Suspensions. In Fundamental Research and Application of Physical Science Vol. 5; 2023; pp 145–174.

Dojčinović, M. P.; Vasiljević, Z. Ž.; Rakočević, L.; Pavlović, V. P.; Ammar-Merah, S.; Vujančević, J. D.; Nikolić, M. V. Humidity and Temperature Sensing of Mixed Nickel–Magnesium Spinel Ferrites. Chemosensors 2023, 11 (1), 34. https://doi.org/10.3390/chemosensors11010034.

Đorđević, B. S.; Kostić, M.; Todorović, Z.; Stamenković, O.; Veselinović, L.; Veljković, V. Triethanolamine-Based Deep Eutectic Solvents as Cosolvents in Biodiesel Production from Black Mustard (Brassica Nigra L.) Seed Oil. Chemical Engineering Research and Design 2023, 195, 526–536. https://doi.org/10.1016/j.cherd.2023.06.016.

Dorm, B. C.; Iemma, M. R. C.; Neto, B. D.; Francisco, R. C. L.; Dinić, I.; Ignjatović, N.; Marković, S.; Vuković, M.; Škapin, S.; Trovatti, E.; Mančić, L. Synthesis and Biological Properties of Alanine-Grafted Hydroxyapatite Nanoparticles. Life 2023, 13 (1), 116. https://doi.org/10.3390/life13010116.

Filipović, S.; Obradović, N.; Corlett, C.; Fahrenholtz, W. G.; Rosenschon, M.; Füglein, E.; Dojčilović, R.; Tošić, D.; Petrović, J.; Đorđević, A.; Vlahović, B.; Pavlović, V. B. Effect of the Filler Morphology on the Crystallization Behavior and Dielectric Properties of the Polyvinylidene Fluoride‐based Composite. Journal of Applied Polymer Science 2023. https://doi.org/10.1002/app.55040.

Janićijević, A.; Filipović, S.; Sknepnek, A.; Vlahović, B.; Đorđević, N.; Kovacević, D.; Mirković, M.; Petronijević, I.; Živković, P.; Rogan, J.; Pavlović, V. B. Dielectric and Structural Properties of the Hybrid Material Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Composite. Polymers 2023, 15 (20), 4080. https://doi.org/10.3390/polym15204080.

Janićijević, A.; Pavlović, V. P.; Kovačević, D.; Đorđević, N.; Marinković, A.; Vlahović, B.; Karoui, A.; Pavlović, V. B.; Filipović, S. Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-Component Hybrid Ceramic/Polymer Composite Material. Journal of Inorganic and Organometallic Polymers and Materials 2023. https://doi.org/10.1007/s10904-023-02953-w.

Jovanović, M.; Vojvodić, P.; Tenji, D.; Tomić, N.; Nešić, J.; Mitić-Ćulafić, D.; Miočinović, J. Cheese Fermented with Human-Derived Limosilactobacillus Reuteri DSM 17938 and Mushroom Powders: A Novel Psychobiotic Food with Enhanced Bioactivity and Sensory Acceptability. Fermentation 2023, 9 (8), 745. https://doi.org/10.3390/fermentation9080745.

Kosanović, D.; Blagojević, V.; Aleksić, S.; Živojinović, J.; Peleš Tadić, A.; Pavlović, V. B.; Obradović, N. Electronic Properties of BZT Nano-Ceramic Grades at Low Frequency Region. Science of Sintering 2023, 55 (3), 413–423. https://doi.org/10.2298/SOS230717043K.

Kuzmanović Nedeljković, S.; Radan, M.; Ćujić Nikolić, N.; Mutavski, Z.; Krgović, N.; Marković, S.; Stević, T.; Živković, J.; Šavikin, K. Microencapsulated Bilberry and Chokeberry Leaf Extracts with Potential Health Benefits. Plants 2023, 12 (23), 3979. https://doi.org/10.3390/plants12233979.

Labus, N.; Krstić, J.; Matijašević, S.; Pavlović, V. B. Oxide Powder Mixture with Poly-Vinyl Alcohol (PVA) and Added Polyethylene Glycol (PEG) as Plasticizer. Science of Sintering 2023, 55, 189–2023. https://doi.org/10.2298/SOS220828005L.

Lazarević, M.; Petrović, S.; Pierfelice, T. V.; Ignjatović, N.; Piattelli, A.; Vlajić Tovilović, T.; Radunović, M. Antimicrobial and Osteogenic Effects of Collagen Membrane Decorated with Chitosan–Nano-Hydroxyapatite. Biomolecules 2023, 13 (4), 579. https://doi.org/10.3390/biom13040579.

Lović, J. D.; Eraković Pantović, S.; Rakočević, L. Z.; Ignjatović, N. L.; Dimitrijević, S. B.; Nikolić, N. D. A Novel Two-Step Electrochemical Deposition Method for Sn-Pd Electrocatalyst Synthesis for a Potential Application in Direct Ethanol Fuel Cells. Processes 2023, 11 (1), 120. https://doi.org/10.3390/pr11010120.

Maksimovic, M.; Jovanović, M.; Nikolić, B.; Tomić, N.; Tenji, D.; Stević, T.; Mitić Ćulafić, D. Persicaria Amphibia, an Old Traditional Remedy and Wild Edible Herb: In Vitro Evaluation of Cytotoxicity and Antimicrobial Properties. Botanica Serbica 2023, 47 (1), 1–8. https://doi.org/10.2298/BOTSERB2301001M.

Mančić, L.; Almeida, L. A.; Machado, T. M.; Gil-Londoño, J.; Dinić, I.; Tomić, M.; Marković, S.; Jardim, P.; Marinkovic, B. A. Tetracycline Removal through the Synergy of Catalysis and Photocatalysis by Novel NaYF4:Yb,Tm@TiO2-Acetylacetone Hybrid Core-Shell Structures. International Journal of Molecular Sciences 2023, 24 (11), 9441. https://doi.org/10.3390/ijms24119441.

Matijašević, S. D.; Topalović, V.; Savić, V.; Labus, N.; Nikolić, J. D.; Zildžović, S.; Grujić, S. The Crystal Growth of NASICON Phase from the Lithium Germanium Phosphate Glass. Science of Sintering 2023, 539 (4), 539–547. https://doi.org/10.2298/SOS220809022M.

Miletić, M.; Radonjić, A. Integer Codes Correcting Single Errors and Double Adjacent Errors. Electronics Letters 2023, 59 (20). https://doi.org/10.1049/ell2.12973.

Milošević, M. V.; Radoičić, M.; Ohara, S.; Abe, H.; Spasojević, J.; Mančić, L.; Šaponjić, Z. Advanced Photocatalysis Mediated by TiO2/Ag/TiO2 Nanoparticles Modified Cotton Fabric. Cellulose 2023, 30, 4749–4771. https://doi.org/10.1007/s10570-023-05165-0.

Mitrašinović, A. M.; Yuankun, Y.; Stopic, S.; Radosavljević, M. Feasibility of Recovering Valuable and Toxic Metals from Copper Slag Using Iron-Containing Additives. Metals 2023, 13 (8), 1467. https://doi.org/10.3390/met13081467.

Mitrašinović, A.; Nešković, J.; Labus, N.; Radosavljević, M. The Effect of the Refractory Material on the Phase Transformation Parameteres during Forming of the Al-8wt%Si-3wt%Cu Structure. Tehnika 2023, 78 (1), 9–14. https://doi.org/10.5937/tehnika2301009M.

Mitrašinović, A.; Nešković, J. V.; Ristić, O. M.; Labus, N. J.; Radosavljević, M. L. J.; Odanović, Z. D. Praćenje Količine Formirane Čvrste Faze u Leguri Aluminijuma u Uslovima Slobodnog Hlađenja. Tehnika 2023, 78 (2), 138–144. https://doi.org/10.5937/tehnika2302138M.

Mitrović Rajić, A.; Pantić, T.; Milošević-Govedarović, S.; Paskaš Mamula, B.; Filipović, N.; Grbović Novaković, J.; Dimitrijević, S. Influence of Mechanochemical Activation on the Thermal Behavior of Pyrophyllite. Science of Sintering 2023, 55 (4), 453–467. https://doi.org/10.2298/SOS220715018M.

Najman, S.; Stojanović, S.; Živković, J.; Najdanović, J.; Radenković, M.; Vasiljević, P.; Ignjatović, N. Applications of Biomaterials in Regenerative Medicine and Tissue Engineering – Concepts and Perspective. Contemporary Materials 2023, 14 (1). https://doi.org/10.7251/COMEN2301001N.

Nedeljković, B.; Pavlović, V. B.; Obradović, N.; Mitrović, N. S. Structural Features of near Equiatomic FeCo-2V Semi-Hard Magnetic Alloy Prepared by MIM Technology. Science of Sintering 2023, 55. https://doi.org/10.2298/SOS231024055N.

Obradović, N.; Feng, L.; Filipović, S.; Mirković, M.; Kosanović, D.; Rogan, J.; Fahrenholtz, W. G. Effect of Mechanical Activation on Carbothermal Synthesis and Densification of ZrC. Journal of the European Ceramic Society 2023, 43 (16), 7306–7313. https://doi.org/10.1016/j.jeurceramsoc.2023.08.007.

Obradović, N.; Filipović, S.; Fahrenholtz, W. G.; Marinković, B. A.; Rogan, J.; Lević, S.; Đorđević, A.; Pavlović, V. B. Morphological and Structural Characterization of MgAl2O4 Spinel. Science of Sintering 2023, 55 (1), 1–10. https://doi.org/10.2298/SOS2301001O.

Peleš Tadić, A.; Blagojević, V. A.; Stojanović, D.; Ostojić, S. B.; Tasić, N.; Kosanović, D.; Uskoković, P.; Pavlović, V. B. Nanomechanical Properties of PVDF–ZnO Polymer Nanocomposite. Materials Science and Engineering: B 2023, 287, 116126. https://doi.org/10.1016/j.mseb.2022.116126.

Peleš-Tadić, A.; Vuković, G.; Kojović, A.; Stojanović, D.; Vlahović, B.; Obradović, N.; Pavlović, V. Fractal Analysis and Microstructure Development PVDF Based Multifunctional Material. Science of Sintering 2023, No. 00, 61–61. https://doi.org/10.2298/SOS231031061P.

Pokhrel, N. K.; Das, P. K.; Radonjic, A. Integer Codes Capable of Correcting Burst Asymmetric Errors. Journal of Applied Mathematics and Computing 2023, 69, 771–784. https://doi.org/10.1007/s12190-022-01770-7.

Popović, A. S.; Gvozdenović, M. M.; Janković, A.; Jugović, B.; Grgur, B. Polypyrrole on Graphite: An Exemplary Model System for Comprehensive Electrochemical Analysis of Energy Storage Materials. Synthetic Metals 2023, 297, 117386. https://doi.org/10.1016/j.synthmet.2023.117386.

Popović, A. S.; Jugović, D.; Grgur, B. Electrochemical Formation and Behavior of Silver and Lead Chlorides as Potential Cathodes for Quasi-Rechargeable Magnesium Seawater Cell. Journal of Materials Science: Materials in Electronics 2023, 34 (14), 1155. https://doi.org/10.1007/s10854-023-10558-9.

Popović, M.; Novaković, M.; Vaňa, D.; Ronning, C.; Jugović, D.; Rajić, V.; Noga, P. Structure-Dependent Optical Properties of Au/Ag Irradiated TiN Thin Films. Optical Materials 2023, 138, 113684. https://doi.org/10.1016/j.optmat.2023.113684.

Radonjić, A.; Pokhrel, N. K.; Das, P. K. Integer Codes Correcting Burst Errors within Two Bytes. Computational and Applied Mathematics 2023, 42 (3). https://doi.org/10.1007/s40314-023-02225-w.

Radonjić, A.; Vujičić, V. Logarithmic Time Encoding and Decoding of Integer Error Control Codes. Engineering Reports 2023, 5 (11), e12675. https://doi.org/10.1002/eng2.12675.

Rajaković, N.; Ivanović, B.; Batas Bjelić, I.; Rajić, T. Sprega Simulacionog Planerskog Alata Sa Alatom Za Proračun Tokova Snaga: Studija Slučaja Republike Srbije. Energija, ekonomija, ekologija 2023, 25 (2), 16–21. https://doi.org/10.46793/EEE23-2.16R.

Sekulić, Z.; Grbović Novaković, J.; Babić, B.; Prvulović, M.; Milanović, I.; Novaković, N.; Rajnović, D.; Filipović, N.; Asanović, V. The Catalytic Effect of Vanadium on Sorption Properties of MgH2-Based Nanocomposites Obtained Using Low Milling Time. Materials 2023, 16 (15), 5480. https://doi.org/10.3390/ma16155480.

Silvestroni, L.; Gilli, N.; Sangiorgi, A.; Corozzi, A.; Filipović, S.; Obradović, N.; Ortiz-Membrado, L.; Jiménez-Piqué, E.; Fahrenholtz, W. G. Multi-Phase (Zr,Ti,Cr)B2solid Solutions: Preparation, Multi-Scale Microstructure, and Local Properties. Journal of Advanced Ceramics 2023, 12 (2), 414–431. https://doi.org/10.26599/JAC.2023.9220695.

Stamenković, T.; Dinić, I.; Vuković, M.; Radmilović, N.; Barudžija, T.; Tomić, M.; Mančić, L.; Lojpur, V. Effect of Bi3+co-Doping on the up-Converting and Photocatalytic Properties of SrGd2O4:Yb3+/Ho3+ Phase. Ceramics International 2023, 49 (23), 37758–37767. https://doi.org/10.1016/j.ceramint.2023.09.103.

Stamenković, T.; Radmilović, N.; Prekajski Đorđević, M. D.; Rabasović, M.; Dinić, I.; Tomić, M.; Lojpur, V.; Mančić, L. Quantum Yield and Energy Transfer in Up-Conversion SrGd2O4:Yb, Er Nanoparticles Obtained via Sol-Gel Assisted Combustion. Journal of Luminescence 2023, 253, 119491. https://doi.org/10.1016/j.jlumin.2022.119491.

Stanfield, A. D.; Smith, S. M.; Filipović, S.; Obradović, N.; Buljak, V.; Hilmas, G. E.; Fahrenholtz, W. G. Final‐stage Densification Kinetics of Direct Current–Sintered ZrB2. Journal of the American Ceramic Society 2023, 106 (10), 5654–5661. https://doi.org/10.1111/jace.19212.

Stanković, M.; Bartolić, D.; Mutavdžić, D.; Marković, S.; Grubić, S.; Jovanović, N. M.; Radotić, K. Estimation of Honey Bee Colony Infection with Nosema Ceranae and Varroa Destructor Using Fluorescence Spectroscopy in Combination with Differential Scanning Calorimetry of Honey Samples. Journal of Apicultural Research 2023, 62 (3), 507–513. https://doi.org/10.1080/00218839.2021.1889803.

Stojanović, S.; Rac, V.; Mojsilović, K.; Vasilić, R.; Marković, S.; Damjanović Vasilić, L. Photocatalytic Degradation of Bisphenol A in Aqueous Solution Using TiO2/Clinoptilolite Hybrid Photocatalyst. Environmental Science and Pollution Research 2023, 30, 84046–84060. https://doi.org/10.1007/s11356-023-28397-w.

Todorović, Z.; Đorđević, B.; Troter, D.; Veselinović, L.; Zdujić, M.; Veljković, V. Effects of Temperature on Physicochemical Properties of the Lecithin Based Deep Eutectic Solvents and Their Use in the CaO-Catalyzed Transesterification. Hemijska industrija 2023, 77 (1), 53–67. https://doi.org/10.2298/HEMIND220527016T.

Tomić, N.; Matić, T.; Filipović, N.; Mitić Ćulafić, D.; Boccacccini, A. R.; Stevanović, M. Synthesis and Characterization of Innovative Resveratrol Nanobelt-like Particles and Assessment of Their Bioactivity, Antioxidative and Antibacterial Properties. Journal of Biomaterials Applications 2023, 38 (1), 122–133. https://doi.org/10.1177/08853282231183109.

Vujančević, J.; Andričević, P.; Đokić, V.; Blagojević, V. A.; Pavlović, V. P.; Ćirković, J.; Horváth, E.; Forró, L.; Karoui, A.; Pavlović, V. B.; Janaćković, Đ. Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal. Catalysts 2023, 13 (2), 352. https://doi.org/10.3390/catal13020352.

Živković, J. M.; Ignjatović, N.; Najman, S. Properties of Hydroxyapatite-Based Biomaterials Important for Interactions with Cells and Tissues. In Bioceramics, Biomimetic and Other Compatible Materials Features for Medical Applications; Najman, S., Mitić, V., Groth, T., Barbeck, M., Chen, P.-Y., Sun, Z., Randjelović, B., Eds.; Engineering Materials; Springer International Publishing: Cham, 2023; pp 115–135. https://doi.org/10.1007/978-3-031-17269-4_6.

Živojinović, J.; Peleš Tadić, A.; Kosanović, D.; Filipović, S.; Stanković, A.; Obradović, N. Uticaj Mehaničke Aktivacije Na Smešu SrTiO3 i Fe2O3 Kao Aditiva. Tehnika 2023, 78 (4), 395–400. https://doi.org/10.5937/tehnika2304395Z.

 

2022

Aleksić, A., Popović, D.B., 2022. New scale for assessing spasticity based on the pendulum test. Computer Methods in Biomechanics and Biomedical Engineering 25, 593–602. https://doi.org/10.1080/10255842.2021.1970144

Araškov, J.B., Višnjevac, A., Popović, J., Blagojević, V., Fernandes, H.S., Sousa, S.F., Novaković, I., Padrón, J.M., Holló, B.B., Monge, M., Rodríguez-Castillo, M., López-De-Luzuriaga, J.M., Filipović, N.R., Todorović, T.R., 2022. Zn(ii) complexes with thiazolyl-hydrazones: structure, intermolecular interactions, photophysical properties, computational study and anticancer activity. CrystEngComm 24, 5194–5214. https://doi.org/10.1039/d2ce00443g

Corlett, C.A., Frontzek, M.D., Obradovic, N., Watts, J.L., Fahrenholtz, W.G., 2022. Mechanical Activation and Cation Site Disorder in MgAl2O4. Materials 15. https://doi.org/10.3390/ma15186422

Djinović, Z., Tomić, M., Kocsis, A., 2022. Optofluidic Micromachined Platform for Refractive Index Measurement. Chemosensors 10, 197. https://doi.org/10.3390/chemosensors10050197

Ganić, T., Vuletić, S., Nikolić, B., Stevanović, M., Kuzmanović, M., Kekić, D., Đurović, S., Cvetković, S., Mitić-Ćulafić, D., 2022. Cinnamon essential oil and its emulsion as efficient antibiofilm agents to combat Acinetobacter baumannii. Frontiers in Microbiology 13. https://doi.org/10.3389/fmicb.2022.989667

Gezović, A., Mišurović, J., Milovanović, B., Etinski, M., Krstić, J., Grudić, V., Dominko, R., Mentus, S., Vujković, M.J., 2022. High Al-ion storage of vine shoots-derived activated carbon: New concept for affordable and sustainable supercapacitors. Journal of Power Sources 538. https://doi.org/10.1016/j.jpowsour.2022.231561

Jafari, E., Aksoez, E.A., Kajganic, P., Metani, A., Popovic-Maneski, L., Bergeron, V., 2022. Optimization of Seating Position and Stimulation Pattern in Functional Electrical Stimulation Cycling: Simulation Study, in: Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS. Institute of Electrical and Electronics Engineers Inc., pp. 725–731. https://doi.org/10.1109/EMBC48229.2022.9871339

Janićijević, A., Pavlović, V.P., Kovačević, D., Perić, M., Vlahović, B., Pavlović, V.B., Filipović, S., 2022. Structural Characterization of Nanocellulose/Fe3O4 Hybrid Nanomaterials. Polymers 14, 1819. https://doi.org/10.3390/polym14091819

Jonović, M., Jugović, B., Žuža, M., Ðorđević, V., Milašinović, N., Bugarski, B., Knežević-Jugović, Z., 2022. Immobilization of Horseradish Peroxidase on Magnetite-Alginate Beads to Enable Effective Strong Binding and Enzyme Recycling during Anthraquinone Dyes’ Degradation. Polymers 14. https://doi.org/10.3390/polym14132614

Kilanski, L., Lewinska, S., Slawska-Waniewska, A., Pavlović, V.B., Filipović, S., 2022. Attempts to obtain BaTiO3/Fe2O3 core-shell type structures: The role of iron oxide nanoparticle formation and agglomeration. Inorganic Chemistry Communications 145. https://doi.org/10.1016/j.inoche.2022.109960

Kuzminac, I.Z., Ćelić, A.S., Bekić, S.S., Kojić, V., Savić, M.P., Ignjatović, N.L., 2022. Hormone receptor binding, selectivity and cytotoxicity of steroid D-homo lactone loaded chitosan nanoparticles for the treatment of breast and prostate cancer cells. Colloids and Surfaces B: Biointerfaces 216. https://doi.org/10.1016/j.colsurfb.2022.112597

Manojlović-Stojanoski, M., Borković-Mitić, S., Nestorović, N., Ristić, N., Trifunović, S., Stevanović, M., Filipović, N., Stojsavljević, A., Pavlović, S., 2022. The Effects of BSA-Stabilized Selenium Nanoparticles and Sodium Selenite Supplementation on the Structure, Oxidative Stress Parameters and Selenium Redox Biology in Rat Placenta. International Journal of Molecular Sciences 23. https://doi.org/10.3390/ijms232113068

Marković, S., Rau, J.V., De Bonis, A., De Bellis, G., Stojanović, Z., Veselinović, L., Mitrić, M., Ignjatović, N., Škapin, S.D., Vengust, D., 2022. Pathway to tailor the phase composition, microstructure and mechanical properties of pulsed laser deposited cobalt-substituted calcium phosphate coatings on titanium. Surface and Coatings Technology 437. https://doi.org/10.1016/j.surfcoat.2022.128275

Matijašević, S.D., Grujić, S.R., Nikolić, J.D., Topalović, V.S., Savić, V.V., Zildžović, S.N., Labus, N.J., 2022. The Analysis of the Nucleation Process of the Lithium Germanium Phosphate Glass. Science of Sintering 54, 321–334. https://doi.org/10.2298/SOS2203321M

Mihaljević, M.J., Radonjić, A., Wang, L., Xu, S., 2022. Security Enhanced Symmetric Key Encryption Employing an Integer Code for the Erasure Channel. Symmetry 14. https://doi.org/10.3390/sym14081709

Miladinović, M.R., Krstić, J.B., Zdujić, M.V., Veselinović, L.M., Veljović, D.N., Banković-Ilić, I.B., Stamenković, O.S., Veljković, V.B., 2022. Transesterification of used cooking sunflower oil catalyzed by hazelnut shell ash. Renewable Energy 183, 103–113. https://doi.org/10.1016/j.renene.2021.10.071

Milanović, I., Govedarović, S.M., Lukić, M., Jovanović, Z., Rmuš, J., Rajić, A.M., Novaković, J.G., Kurko, S., 2022. Study of milling time impact on hydrogen desorption from LiAlH4-Fe2O3 composites. Processing and Application of Ceramics 16, 259–266. https://doi.org/10.2298/PAC2203259M

Milićević, N., Novaković, M., Potočnik, J., Milović, M., Rakočević, L., Abazović, N., Pjević, D., 2022. Influencing surface phenomena by Au diffusion in buffered TiO2-Au thin films: Effects of deposition and annealing processing. Surfaces and Interfaces 30, 101811. https://doi.org/10.1016/j.surfin.2022.101811

Mirković, M., Filipović, S., Kalijadis, A., Mašković, P., Mašković, J., Vlahović, B., Pavlović, V., 2022. Hydroxyapatite/TiO2 Nanomaterial with Defined Microstructural and Good Antimicrobial Properties. Antibiotics 11. https://doi.org/10.3390/antibiotics11050592

Mitic, V.V., Milosevic, D., Randjelovic, B., Milosevic, M., Markovic, B., Fecht, H., Vlahovic, B., 2022. The fractal interpolation applied on brownian motion particles trajectories reconstruction. International Journal of Modern Physics B 36. https://doi.org/10.1142/S0217979222500357

Mitrašinović, A., Tomić, M., 2022. Functional and Environmental Advantage of Cleaning Ti5B1 Master Alloy. International Journal of Precision Engineering and Manufacturing - Green Technology 9, 783–793. https://doi.org/10.1007/s40684-021-00339-2

Mitrašinović, A.M., Radosavljević, M., 2022. Photovoltaic Materials and Their Path toward Cleaner Energy. Global Challenges. https://doi.org/10.1002/gch2.202200146

Muñoz-Fernandez, L., Gomez-Villalba, L.S., Milošević, O., Rabanal, M.E., 2022. Influence of nanoscale defects on the improvement of photocatalytic activity of Ag/ZnO. Materials Characterization 185. https://doi.org/10.1016/j.matchar.2021.111718

Pagnacco, M., Marković, S., Potočnik, J., Krstić, V., Tančić, P., Mojović, M., Mojović, Z., 2022. The Influence of Electrode Constituents on Hydrogen Evolution Reaction on Phosphate W- and Mo-Bronze-Based Electrodes. Journal of the Electrochemical Society 169. https://doi.org/10.1149/1945-7111/ac96ab

Parrado-Hernando, G., Herc, L., Pfeifer, A., Capellán-Perez, I., Batas Bjelić, I., Duić, N., Frechoso-Escudero, F., Miguel González, L.J., Gjorgievski, V.Z., 2022. Capturing features of hourly-resolution energy models through statistical annual indicators. Renewable Energy 197, 1192–1223. https://doi.org/10.1016/j.renene.2022.07.040

Pavic, A., Stojanovic, Z., Pekmezovic, M., Veljović, Ð., O’Connor, K., Malagurski, I., Nikodinovic-Runic, J., 2022. Polyenes in Medium Chain Length Polyhydroxyalkanoate (mcl-PHA) Biopolymer Microspheres with Reduced Toxicity and Improved Therapeutic Effect against Candida Infection in Zebrafish Model. Pharmaceutics 14. https://doi.org/10.3390/pharmaceutics14040696

Petrovic, J.G., Olcan, D.I., Obradovic, N.N., Djordjevic, A.R., 2022. High-Precision Method of Moments Applied to Measurement of Dielectric Parameters at Microwave Frequencies. IEEE Transactions on Microwave Theory and Techniques 70, 970–979. https://doi.org/10.1109/TMTT.2021.3136294

Pokhrel, N.K., Das, P.K., Radonjic, A., 2022. Integer codes capable of correcting burst asymmetric errors. J. Appl. Math. Comput. https://doi.org/10.1007/s12190-022-01770-7

Popović, M., Veličković, Z.S., Bogdanov, J., Marinković, A.D., Luna, M.C., Trajković, I., Obradović, N., Pavlović, V., 2022. Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent. Science of Sintering 54, 105–124. https://doi.org/10.2298/SOS2201105P

Popović-Maneski, L., Došen, S., Popovic, M.R., Azevedo, C., Keller, T., Ferrante, S., Bergeron, V., Milosevic, M., 2022. TRIBUTE: Dejan B. Popović (1950–2021). Artificial Organs. https://doi.org/10.1111/aor.14356

Popović-Maneski, L., Mateo, S., 2022. MotiMove: Multi-purpose transcutaneous functional electrical stimulator. Artificial Organs 46, 1970–1979. https://doi.org/10.1111/aor.14379

Radonjic, A., Vujicic, V., 2022. Integer Codes Correcting Burst Asymmetric Errors Within a Byte. IETE Journal of Research 68, 176–182. https://doi.org/10.1080/03772063.2019.1593056

Rafailović, L.D., Jovanović, A.Z., Gutić, S.J., Wehr, J., Rentenberger, C., Trišović, T.L., Pašti, I.A., 2022. New Insights into the Metallization of Graphene-Supported Composite Materials-from 3D Cu-Grown Structures to Free-Standing Electrodeposited Porous Ni Foils. ACS Omega 7, 4352–4362. https://doi.org/10.1021/acsomega.1c06145

Rizzotto, F., Vasiljevic, Z.Z., Stanojevic, G., Dojcinovic, M.P., Jankovic-Castvan, I., Vujancevic, J.D., Tadic, N.B., Brankovic, G.O., Magniez, A., Vidic, J., Nikolic, M.V., 2022. Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application. Food Chemistry 390. https://doi.org/10.1016/j.foodchem.2022.133198

Stevanović, M.M., Filipović, N., Kuzmanović, M., Tomić, N., Ušjak, D., Milenković, M., Zheng, K., Stampfl, J., Boccaccini, A.R., 2022. Synthesis and characterization of a collagen-based composite material containing selenium nanoparticles. Journal of Biomaterials Applications 36, 1800–1811. https://doi.org/10.1177/08853282211073731

Stevanovic, M.M., Vukomanovic, M., Milenkovic, M., Boccaccini, A.R., 2022. Editorial: Antimicrobial nanostructured polymeric materials and nanocomposites, volume II. Frontiers in Bioengineering and Biotechnology 10. https://doi.org/10.3389/fbioe.2022.1015485

Ušjak, D., Novović, K., Filipić, B., Kojić, M., Filipović, N., Stevanović, M.M., Milenković, M.T., 2022. In vitro colistin susceptibility of pandrug-resistant Ac. baumannii is restored in the presence of selenium nanoparticles. Journal of Applied Microbiology 133, 1197–1206. https://doi.org/10.1111/jam.15638

Uskoković, V., Ignjatović, N., Škapin, S., Uskoković, D.P., 2022. Germanium-doped hydroxyapatite: Synthesis and characterization of a new substituted apatite. Ceramics International 48, 27693–27702. https://doi.org/10.1016/j.ceramint.2022.06.068

Vasić, M.M., Milović, M., Bajuk-Bogdanović, D., Petrović, T., Vujković, M.J., 2022. Simply Prepared Magnesium Vanadium Oxides as Cathode Materials for Rechargeable Aqueous Magnesium Ion Batteries. Nanomaterials 12. https://doi.org/10.3390/nano12162767

Vujančević, J., Bjelajac, A., Veltruska, K., Matolin, V., Siketić, Z., Provatas, G., Jakšić, M., Stan, G.E., Socol, G., Mihailescu, I.N., Pavlović, V.B., Janaćković, D., 2022. TiO2 Nanotubes Film/FTO Glass Interface: Thermal Treatment Effects. Science of Sintering 54, 235–248. https://doi.org/10.2298/SOS2202235V

Vujković, M.J., Mladenović, D., Milović, M., Petrović, T., Bajuk-Bogdanović, D., Šljukić Paunković, B., Mentus, S., 2022. Sodium-pillared vanadium oxides as next-gen materials: Does co-inserted water control the cyclic stability of vanadates in an aqueous electrolyte? Electrochimica Acta 425, 140603. https://doi.org/10.1016/j.electacta.2022.140603

 

2021

Aleksić, V., Batas-Bjelić, I., 2021, "Do We Need More Ambition for the Renewable Energy Transition in Serbia? Foundations of Energy Governance and Planning", Energija, Ekonomija, Ekologija, vol. 23, pp. 1–9. (https://doi.org/10.46793/EEE21-3.01A)

Batas-Bjelić, I., Rajaković, N., 2021, "National Energy and Climate Planning in Serbia: From Lagging Behind to an Ambitious EU Candidate?", International Journal of Sustainable Energy Planning and Management, vol. 32, pp. 47–60. (https://doi.org/10.5278/ijsepm.6300)

Brdarić, E., Soković Bajić, S., Đokić, J., Đurđić, S., Ruas-Madiedo, P., Stevanović, M., Tolinački, M., Dinić, M., Mutić, J., Golić, N., Živković, M., 2021, "Protective Effect of an Exopolysaccharide Produced by Lactiplantibacillus plantarum BGAN8 Against Cadmium-Induced Toxicity in Caco-2 Cells", Frontiers in Microbiology, vol. 12, 3222. (https://doi.org/10.3389/fmicb.2021.759378)

Degli Esposti Lorenzo, Marković Smilja, Ignjatović Nenad, Panseri Silvia, Montesi Monica, Adamiano Alessio, Fosca Marco, Rau Julietta V., Uskoković Vuk, Iafisco Michele, "Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics" Journal of Materials Chemistry B, 9, no. 24 (2021):4832-4845, (https://doi.org/10.1039/D1TB00601K)

Denysenko, I.B., Stefanović, I., Mikikian, M., Kovačević, E., Berndt, J., 2021. Argon/dust and pure argon pulsed plasmas explored using a spatially-averaged model. Journal of Physics D: Applied Physics 54, 065202. https://doi.org/10.1088/1361-6463/abc210

Dojcinovic, M.P., Vasiljevic, Z.Z., Krstic, J.B., Vujancevic, J.D., Markovic, S., Tadic, N.B., Nikolic, M.V. 2021, "Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing", Sensors, vol. 21, 4357. (https://doi.org/10.3390/s21134357)

Đinović, Z., Pavelka, R., Tomić, M., Sprinzl, G., Müller, J.G., Traxler, H., 2021, "Experimental study of an implantable fiber-optic microphone on human cadavers", Hearing Research, vol. 410, 108351. (https://doi.org/10.1016/j.heares.2021.108351)

Đorđević, A., Olćan, D., Petrović, J., Obradović, N., Filipović, S., 2021, "High-accuracy quasistatic numerical model for bodies of revolution tailored for RF measurements of dielectric parameters", Facta universitatis - series: Electronics and Energetics, vol. 34, pp. 141–156. (https://doi.org/10.2298/FUEE2101141D)

Filipović, N., Stojanović, Z., Stevanović, M., 2021, "Uticaj stabilizatora na fizičkohemijska svojstva nanočestica selena dobijenih hemijskom redukcijom", Tehnika, vol. 76, pp. 137–143. (https://doi.org/10.5937/tehnika2102137F)

Filipović, N., Ušjak, D., Milenković, M.T., Zheng, K., Liverani, L., Boccaccini, A.R., Stevanović, M.M., 2021. "Comparative Study of the Antimicrobial Activity of Selenium Nanoparticles With Different Surface Chemistry and Structure", Frontiers in Bioengineering and Biotechnology, vol. 8, 624621. (https://doi.org/10.3389/fbioe.2020.624621)

Filipović, S., Obradović, N., Andjelković, L., Olćan, D., Petrović, J., Mirković, M., Pavlović, V., Jeremić, D., Vlahović, B., Đorđević, A., 2021. Multiferroic heterostructure BaTiO3/?-Fe2O3composite obtained by in situ reaction. Science of Sintering, vol. 53, pp. 1–8. (https://doi.org/10.2298/SOS2101001F)

Gezović, A., Vujković, M.J., Milović, M., Grudić, V., Dominko, R., Mentus, S., 2021. Recent developments of Na4M3(PO4)2(P2O7) as the cathode material for alkaline-ion rechargeable batteries: challenges and outlook. Energy Storage Matererials, vol. 37, pp. 243–273. (https://doi.org/10.1016/j.ensm.2021.02.011)

Ignjatović, N., Mitković, M., Obradović, B., Stamenković, D., Dankuc, D., Manić, M., Grbović, A., Kovačević, B., Djukanović, lj., 2021, "Interdisciplinary crossover for rapid advancements: collaboration between medical and engineering scientists with the focus on Serbia", Serbian Archives of Medicine, vol. 49, pp. 229-235 (https://doi.org/10.2298/SARH210110021D)

Ivanović, M., Nenadović, S., Pavlović, V.P., Radović, I., Kijevčanin, M., Pavlović, V.B., Kljajević, L. 2021, "The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers", Macedonian Journal of Chemistry and Chemical Engineering, vol. 40, pp. 107–117. (https://doi.org/10.20450/mjcce.2021.2127)

Janićijević, Ž., Stanković, A., Žegura, B., Veljović, Đ., Djekić, L., Krajišnik, D., Filipič, M. & Stevanović, M.M. 2021, "Safe-by-design gelatin-modified zinc oxide nanoparticles", Journal of Nanoparticle Research, vol. 23, no. 9. (https://doi.org/10.1007/s11051-021-05312-3)

Janićijević, A., Sknepnek, A., Mirković, M., Pavlović, V., Filipović, S. 2021, "Optimizacija parametara sinteze nanokompozita na bazi bakterijske nanoceluloze/Fe3O4", Tehnika, vol. 76, pp. 273–278. (https://doi.org/10.5937/tehnika2103273J)

Jelić, D., Zeljković, S., Jugović, D., Mentus, S. 2021, "Thermogravimetric insight in the reduction of xCuO – (1-x)MoO3 oxide system (0.1 ? x ? 0.9) by hydrogen", International Journal of Refractory Metals and Hard Materials, vol. 96, 105480. (https://doi.org/10.1016/j.ijrmhm.2021.105480)

Jokić, I., Djurić, Z., Radulović, K., Frantlović, M., Milovanović, G.V. & Krstajić, P.M. 2021, "Stochastic time response and ultimate noise performance of adsorption-based microfluidic biosensors", Biosensors, vol. 11, no. 6, 194. (https://doi.org/10.3390/bios11060194)

Jovanović, M., Ćujić-Nikolić, N., Drinić, Z., Janković, T., Marković, S., Petrović, P., Šavikin, K. 2021, "Spray drying of Gentiana asclepiadea L. root extract: Successful encapsulation into powders with preserved stability of bioactive compounds", Industrial Crops and Products, vol. 172, 114044. (https://doi.org/10.1016/j.indcrop.2021.114044)

Jovanović, A.A., Lević, S.M., Pavlović, V.B., Marković, S.B., Pjanović, R.V., Đorđević, V.B., Nedović, V., Bugarski, B.M. 2021, "Freeze vs. Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material", Molecules, vol. 26, 3933. (https://doi.org/10.3390/molecules26133933)

Jonović, M., Žuža, M., Đorđević, V., Šekuljica, N., Milivojević, M., Jugović, B., Bugarski, B., Knežević Jugović, Z. 2021, "Immobilized Alcalase on Micron- and Submicron-Sized Alginate Beads as a Potential Biocatalyst for Hydrolysis of Food Proteins", Catalysts, vol. 11, 305. (https://doi.org/10.3390/catal11030305)

Jugović, D., 2021, "Synthesis and structural characterization of some cathode materials for lithium-ion batteries", in: Advanced Ceramics and Applications. De Gruyter, pp. 123–154. (http://dx.doi.org/10.1515/9783110627992-011)

Khamoushi, K., Mitic, V.V., Manojlovic, J., Paunovic, V., Cvetkovic, Z. & Lazovic, G. 2021, "Comparison between crystal structure and dielectric properties Nd (Mg 1 / 2 Ti 1 / 2) O 3 (NMT) and Nd (Zn 1 / 2 Ti 1 / 2) O 3 (NZT)", Modern Physics Letters B, vol. 35, no. 21. (https://doi.org/10.1142/S021798492150370X)

Kosanović, D., Živojinović, J., Vujančević, J., Peleš, A., Blagojević, V. 2021, "Point defects and their effect on dielectric permittivity in strontium titanate ceramics", Science of Sintering, vol. 53, pp. 285–299. (https://doi.org/10.2298/SOS2103285K)

Klute, M., Kemaneci, E., Porteanu, H.-E., Stefanović, I., Heinrich, W., Awakowicz, P., Brinkmann, R.P. 2021. Modelling of a miniature microwave driven nitrogen plasma jet and comparison to measurements. Plasma Sources Science and Technology, vol. 30, 065014. (https://doi.org/10.1088/1361-6595/ac04bc)

Lukić, M.J., Lücke, F., Ilić, T., Petrović, K., Gebauer, D., 2021, "On the Role of Poly-Glutamic Acid in the Early Stages of Iron(III) (Oxy)(hydr)oxide Formation", Minerals, vol. 11, 715. https://doi.org/10.3390/min11070715

Matijašević, S., Topalović, V., Grujić, S., Savić, V., Nikolić, J., Labus, N., Zildžović, S. 2021, "The thermophysical properties of primary phase in lithium germanium phosphate glass", Science of Sintering, vol. 53, pp. 301–310. (https://doi.org/10.2298/SOS2103301M)

Mei, J., Peng, X., Zhang, Q., Zhang, X., Liao, T., Mitic, V., Sun, Z., 2021, "Bamboo-Membrane Inspired Multilevel Ultrafast Interlayer Ion Transport for Superior Volumetric Energy Storage", Advanced Functional Materials, vol. 31, no. 31, 2100299 (https://doi.org/10.1002/adfm.202100299)

Miloradovic, Z., Tomic, N., Kljajevic, N., Levic, S., Pavlovic, V., Blazic, M. & Miocinovic, J. 2021, "High heat treatment of goat cheese milk. The effect on sensory profile, consumer acceptance and microstructure of cheese", Foods, vol. 10, no. 5. (https://doi.org/10.3390/foods10051116)

Milović, M., Vujković, M., Jugović, D., Mitrić, M., 2021, "Electrochemical and structural study on cycling performance of ?-LiV2O5 cathode", Ceramics International, vol. 47, pp. 17077–17083. (https://doi.org/10.1016/j.ceramint.2021.03.016)

Milović, M., Jugović, D., Vujković, M., Kuzmanović, M., Mraković, A., Mitrić, M., 2021, "Towards a green and cost-effective synthesis of polyanionic cathodes: comparative electrochemical behaviour of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C synthesized using methylcellulose matrix", Bulletin of Materials Science, vol. 44. (https://doi.org/10.1007/s12034-021-02397-3)

Mitic, V.V., Randjelovic, B., Ilic, I., Ribar, S., Chun, A.-., Stajcic, A. & Vlahovic, B. 2021, "The 3D graph approach for breakdown voltage calculation in BaTiO3ceramics", International Journal of Modern Physics B, vol. 35, no. 7. (https://doi.org/10.1142/S0217979221501034)

Mitić, V.V., Chen, P.-Y., Chou, Y.-Y., Ilić, I.D., Marković, B., Lazović, G., 2021, "Fractal nature analysis in porous structured bio-ceramics", Modern Physics Letters B, vol. 35, no. 12, 21503188. (https://doi.org/10.1142/S0217984921503188)

Mitić, V.V., Fleshman, C., Duh, J.-G., Ilić, I.D., Lazović, G. 202, "The fractal nature analysis by applying grain formations of SAC305/OSP Cu and SAC305-0.05Ni/OSP Cu solder joints for microelectronic packaging", Modern Physics Letters B, vol. 35. (https://doi.org/10.1142/S0217984921504273)

Mitic, V., Lazovic, G., Milosevic, D., Ristanovic, E., Simeunovic, D., Tsay, S.-C., Milosevic, M., Vlahovic, B., 2021, "Brownian fractal nature coronavirus motion". Modern Physics Letters B, vol. 35, no.4, 2150076. (https://doi.org/10.1142/S0217984921500767)

Mitic, V.V., Lazovic, G., Randjelovic, B., Paunovic, V., Radovic, I., Stajcic, A., Vlahovic, B. 2021, "Graph theory applied to microelectronics intergranular relations", Ferroelectrics, vol. 570, pp. 145–152. (https://doi.org/10.1080/00150193.2020.1839265)

Mitić, V.V., Lazović, G., Đorđević, D., Stanković, M., Paunović, V., Krstić, N., Manojlović, J. 2021, "Butler-Volmer current equation and fractal nature correction in electrochemical energy", Thermal Science, vol. 25, 1837–1848. (https://doi.org/10.2298/TSCI200117232M)

Mitić, V.V., Lazović, G., Radosavljevic-Mihajlovic, A.S., Milosević, D., Marković, B., Simeunović, D., Vlahović, B. 2021, "Forensic science and fractal nature analysis", Modern Physics Letters B, vol. 35. (https://doi.org/10.1142/S0217984921504935)

Mitić, V.V., Ribar, S., Ranđelović, B.M., Aleksić, D., Fecht, H., Vlahovic, B. 2021, "A new neural network approach to density calculation on ceramic materials", Modern Physics Letters B. https://doi.org/10.1142/S0217984921505497

Mitić, V., Serpa, C., Ilić, I., Mohr, M., Fecht, H.-J., 2021, "Fractal nature of advanced Ni-based superalloys solidified on board the international space station", Remote Sensing, vol. 13. (https://doi.org/10.3390/rs13091724)

Mitrašinović, A.M. 2021, "Photovoltaics advancements for transition from renewable to clean energy", Energy, December 2021, 121510. (https://doi.org/10.1016/j.energy.2021.121510)

Mitrašinović, A.M., Momčilović, D.B. & Odanović, Z. 2021, "Assessment of Grain Size and Grain Refinement Efficiency by Calculation of Released Heat Attributed to Formation of Primary Aluminum Crystals During Solidification of Al7Si4Cu Alloy", Transactions of the Indian Institute of Metals, Vol. 74, pp. 1917–1922 (https://doi.org/10.1007/s12666-021-02279-6).

Mitrašinović, A.M., Odanović, Z., 2021. Thermodynamic and kinetics investigation of elemental evaporation from molten Al7Si4Cu alloy. Thermochimica Acta 695, 178816. (https://doi.org/10.1016/j.tca.2020.178816)

Nikolić, M.V., Labus, N., Pavlović, V.P., Marković, S., Luković, M.D., Tadić, N.B., Vujančević, J., Vlahović, B., Pavlović, V.B., 2021. "Nanocrystalline Zn2SnO4/SnO2: Crystal structure and humidity influence on complex impedance", Journal of Electroceramics, vol. 45, pp. 135–147. (https://doi.org/10.1007/s10832-021-00232-z)

Obradović, N., Fahrenholtz, W.G., Corlett, C., Filipović, S., Nikolić, M., Marinković, B.A., Failla, S., Sciti, D., Di Rosa, D., Sani, E. 2021, "Microstructural and Optical Properties of MgAl2O4 Spinel: Effects of Mechanical Activation, Y2O3 and Graphene Addition",. Materials, vol. 14, 7674. (https://doi.org/10.3390/ma14247674)

Pantović-Pavlović, M. R., Pavlović, M. M., Kovačina, J. N., Stanojević, B. P., Stevanović, J. S., Panić, V. V., Ignjatović, N. L. 2021, "Cytotoxicity of amorphous calcium phosphate multifunctional composite coatings on titanium obtained by in situ anodization/anaphoretic deposition", Journal of the Serbian Chemical Society, vol. 86, pp. 555–559. (https://doi.org/10.2298/JSC210211024P)

Pantović Pavlović, M.R., Stanojević, B.P., Pavlović, M.M., Mihailović, M.D., Stevanović, J.S., Panić, V.V. & Ignjatović, N.L. 2021, "Anodizing/Anaphoretic Electrodeposition of Nano-Calcium Phosphate/Chitosan Lactate Multifunctional Coatings on Titanium with Advanced Corrosion Resistance, Bioactivity, and Antibacterial Properties", ACS Biomaterials Science and Engineering, vol 7, no. 7, pp. 3088–3102 (https://doi.org/10.1021/acsbiomaterials.1c00035)

Pavlović, V.P., Tošić, D., Dojčilović, R., Dudić, D., Dramićanin, M.D., Medić, M., McPherson, M.M., Pavlović, V.B., Vlahovic, B., Djoković, V. 2021, "PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix", vol. Polymer Testing, vol. 96, 107093. (https://doi.org/10.1016/j.polymertesting.2021.107093)

Pfeifer, A., Herc, L., Batas Bjelić, I., Duić, N., 2021, "Flexibility index and decreasing the costs in energy systems with high share of renewable energy", Energy Conversion and Management, vol. 240.(https://doi.org/10.1016/j.enconman.2021.114258)

Radonjic, A. 2020. " Integer codes correcting single asymmetric errors", Annals of Telecommunications, vol. 76, no. 1-2, pp. 109-113. (https://doi.org/10.1007/s12243-020-00816-w)

Radonjic, A. 2021, "Integer Codes Correcting Single Errors within Two Bytes. Journal of Circuits", Systems and Computers, vol. 30, no. 14, 21502601. (https://doi.org/10.1142/S0218126621502601)

Rakočević, L., Štrbac, S., Potočnik, J., Popović, M., Jugović, D., Simatović, I.S. 2021, "The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries", Ceramics International, vol. 47, no. 4, pp. 4595-4603. (https://doi.org/10.1016/j.ceramint.2020.10.025)

Radosavljević-Mihajlović, A., Mitić, V.V., Šaponjić, A., Kasić, V. 2021, "Thermally induced phase transformation of Mn-LTA and Mn-FAU zeolite to anorthite phases", Science of Sintering, vol. 53, pp. 397–406. (https://doi.org/10.2298/SOS2103397R)

Ristić, P., Filipović, N., Blagojević, V.A., Ćirković, J., Holló, B.B., Đokić, V.R., Donnard, M., Gulea, M., Marjanović, I., Klisurić, O.R., Todorović, T.R. 2021, "2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior", CrystEngComm, vol. 23, pp. 4799–4815. (https://doi.org/10.1039/D1CE00394A)

Stanković, A., Jovanović, S. 2021, "Ispitivanje uticaja mehanohemijskog procesiranja na rastvorljivost verapamil hidrohlorida", Tehnika, vol. 76, pp. 9–14. (https://doi.org/10.5937/tehnika2101009S)

Stratimirovic, D., Batas-Bjelic, I., Djurdjevic, V., Blesic, S., 2021. Changes in long-term properties and natural cycles of the Danube river level and flow induced by damming. Physica A: Statistical Mechanics and its Applications 566, 125607. (https://doi.org/10.1016/j.physa.2020.125607)

Šuljagić, M., Vulić, P., Jeremić, D., Pavlović, V., Filipović, S., Kilanski, L., Lewinska, S., Slawska-Waniewska, A., Milenković, M.R., Nikolić, A.S., Andjelković, L., 2021. The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods. Materials Research Bulletin 134, 111117. (https://doi.org/10.1016/j.materresbull.2020.111117)

Ušjak, D., Dinić, M., Novović, K., Ivković, B., Filipović, N., Stevanović, M., Milenković, M.T. 2021, "Methoxy-Substituted Hydroxychalcone Reduces Biofilm Production, Adhesion and Surface Motility of Acinetobacter baumannii by Inhibiting ompA Gene Expression", Chemistry & Biodiversity, vol. 18, no. 1, e2000786. (https://doi.org/10.1002/cbdv.202000786)

Vasiljević, Z. Ž., Dojčinović, M. P., Vujančević, J. D., Spreitzer, M., Kovač, J., Bartolić, D., Marković, S., Janković-Čaštvan, I., Tadić, N. B., Nikolić, M. V. 2021, "Exploring the impact of calcination parameters on the crystal structure, morphology, and optical properties of electrospun Fe2TiO5 nanofibers", RSC Advances, vol. 11, pp.32358–32368. (https://doi.org/10.1039/D1RA05748K)

Vujasinović, J., Savić, G., Bjelic, I.B., Rajaković, N., 2021. Decreasing the implementation costs of smart metering systems with interoperability, in: 2021 IEEE International Workshop on Metrology for Industry 4.0 IoT (MetroInd4.0 IoT), IEEE, pp. 370–373. (https://doi.org/10.1109/MetroInd4.0IoT51437.2021.9488512)

 

2020

Aleksić, J., Barudžija, T., Jugović, D., Mitrić, M., Bošković, M., Jagličić, Z., Lisjak, D. & Kostić, L. 2020, "Investigation of structural, microstructural and magnetic properties of YbxY1-xF3 solid solutions", Journal of Physics and Chemistry of Solids, vol. 142, 109449. (https://doi.org/10.1016/j.jpcs.2020.109449)

Aminirastabi, H., Xue, H., Mitić, V.V., Lazović, G., Ji, G., Peng, D., 2020, "Novel fractal analysis of nanograin growth in BaTiO3 thin film", Materials Chemistry and Physics, vol. 239, 122261. (https://doi.org/10.1016/j.matchemphys.2019.122261)

Aminirastabi, H., Weng, Z., Xue, H., Yu, Y., Ji, G., Mitic, V.V., Guan, R., 2020. Evaluation of nano grain growth of TiO2 fibers fabricated via centrifugal jet spinning. Nano-Structures & Nano-Objects 21, 100413. https://doi.org/10.1016/j.nanoso.2019.100413

Anđelković, Lj., Jeremić, D., Milenković, M.R., Radosavljević, J., Vulić, P., Pavlović, V., Manojlović, D., Nikolić, A.S. 2020, "Synthesis, characterization and in vitro evaluation of divalent ion release from stable NiFe2O4, ZnFe2O4 and core-shell ZnFe2O4@NiFe2O4 nanoparticles", Ceramics International, vol. 46, pp. 3528–3533. (https://doi.org/10.1016/j.ceramint.2019.10.068)

Batinić, P.M., Đorđević, V.B., Stevanović, S.I., Balanč, B.D., Marković, S.B., Luković, N.D., Mijin, D.Ž., Bugarski, B.M., 2020. Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin. Journal of Drug Delivery Science and Technology 59, 101920. https://doi.org/10.1016/j.jddst.2020.101920

Bjelajac, A., Petrović, R., Vujancevic, J., Veltruska, K., Matolin, V., Siketic, Z., Provatas, G., Jaksic, M., Stan, G.E., Socol, G., Mihailescu, I.N., Janaćković, D., 2020. Sn-doped TiO2 nanotubular thin film for photocatalytic degradation of methyl orange dye. Journal of Physics and Chemistry of Solids 147, 109609. https://doi.org/10.1016/j.jpcs.2020.109609

Casas-Luna, M., Torres-Rodríguez, J.A., Valdés-Martínez, O.U., Obradović, N., Slámečka, K., Maca, K., Kaiser, J., Montúfar, E.B., Čelko, L. 2020, "Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture – Strength relationship and material catalytic behavior", Ceramics International, vol. 46, no. 7, pp. 8853-8861 (https://doi.org/10.1016/j.ceramint.2019.12.130)

Dinic, I., Vukovic, M., Nikolic, M., Tan, Z., Milosevic, O., Mancic, L., 2020. Up-converting nanoparticles synthesis using hydroxyl–carboxyl chelating agents: Fluoride source effect. J. Chem. Phys. 153, 084706. (https://doi.org/10.1063/5.0016559)

Dodevski, V., Pagnacco, M.C., Radović, I., Rosić, M., Janković, B., Stojmenović, M. & Mitić, V.V. 2020, "Characterization of silicon carbide ceramics obtained from porous carbon structure achieved by plant carbonization", Materials Chemistry and Physics, vol. 245, 122768. (https://doi.org/10.1016/j.matchemphys.2020.122768)

Djurić, Z., Jokić, I. 2020, Ideal efficiency of resonant cavity-enhanced perovskite solar cells, Optical and Quantum Electronics, vol. 52, 230.(https://doi.org/10.1007/s11082-020-02342-4)

Filipović, S., Anđelković, L., Jeremić, D., Vulić, P., Nikolić, A., Marković, S., Paunović, V., Lević, S., Pavlović, V.B., 2020. Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis. Science of Sintering 52, 257–268. (https://doi.org/10.2298/SOS2003257F)

Garzon-Roman, A., Milosevic, O., Rabanal, M.E. 2020, "Morphological, structural, and functional properties of vertically aligned carbon nanotubes deposited on porous silicon layers by ultrasonic spray pyrolysis", Microporous and Mesoporous Materials, vol. 292, 109738. (https://doi.org/10.1016/j.micromeso.2019.109738)

Grgur, B.N., Trišović, T.Lj., Rafailović, L., 2020. Corrosion of stainless steel 316Ti tank for the transport 12–15% of hypochlorite solution. Engineering Failure Analysis 116, 104768. https://doi.org/10.1016/j.engfailanal.2020.104768

Ignjatović, N.L., Marković, S., Jugović, D., Uskoković, V., Uskoković, D.P., 2020. From molecules to nanoparticles to functional materials - Authors’ review. Journal of the Serbian Chemical Society 85, 1383–1403. (https://doi.org/10.2298/JSC200426035I)

Janićijević, Ž., Vujčić, I., Veljović, Đ., Vujisić, M., Radovanović, F., 2020. Composite poly(DL-lactide-co-glycolide)/poly(acrylic acid) hydrogels synthesized using UV and gamma irradiation: comparison of material properties. Radiation Physics and Chemistry 166, 108466. https://doi.org/10.1016/j.radphyschem.2019.108466

Jovanović, Z., Mravik, Ž., Bajuk-Bogdanović, D., Jovanović, S., Marković, S., Vujković, M., Kovač, J., Vengust, D., Uskoković-Marković, S., Holclajtner-Antunović, I. 2020, "Self-limiting interactions in 2D–0D system: A case study of graphene oxide and 12-tungstophosphoric acid nanocomposite", Carbon, vol. 156, pp. 166–178.( https://doi.org/10.1016/j.carbon.2019.09.072)

Kosanović, D., Labus, N., Živojinović, J., Peleš Tadić, A., Blagojević, V.A., Pavlović, V.B., 2020. Effects of Mechanical Activation on the Formation and Sintering Kinetics of Barium Strontium Titanate Ceramics. Science of Sintering 52, 371–385. (https://doi.org/10.2298/SOS2004371K)

Krueger, E., Popović-Maneski, L., Neto, G.N.N., Mendonça Scheeren, E., Fiusa, J.M., Nohama, P., 2020. Neuromuscular fatigue detection by mechanomyography in people with complete spinal cord injury. Research on Biomedical Engineering 36, 203–212. (https://doi.org/10.1007/s42600-020-00061-z)

Miladinović, M.R., Zdujić, M.V., Veljović, D.N., Krstić, J.B., Banković-Ilić, I.B., Veljković, V.B. & Stamenković, O.S. 2020, "Valorization of walnut shell ash as a catalyst for biodiesel production", Renewable Energy, vol. 147, pp. 1033-1043. (https://doi.org/10.1016/j.renene.2019.09.056)

Miloradovic, Z., Kljajevic, N., Miocinovic, J., Levic, S., Pavlovic, V.B., Blažić, M., Pudja, P. 2020, "Rheology and Microstructures of Rennet Gels from Differently Heated Goat Milk", Foods, vol. 9, 283. (https://doi.org/10.3390/foods9030283)

Miljković, M., Kljajević, L., Filipović, S., Pavlović, V.B., Nenadović, S.S., 2020. Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times. Science of Sintering 52, 405–413. (https://doi.org/10.2298/SOS2004405M)

Mitić, V.V., Lazović, G., Lu, C.-A., Paunović, V., Radović, I., Stajčić, A., Vlahović, B. 2020, "The nano-scale modified batio3 morphology influence on electronic properties and ceramics fractal nature frontiers", Applied Sciences (Switzerland), vol. 10, no. 3485, (https://doi.org/10.3390/app10103485).

Mitić, V.V., Lazović, G., Milošević, D., Lu, C.-A., Manojlović, J., Tsay, S.-C., Kruchinin, S., Vlahović, B., 2020. Brownian motion and fractal nature. Modern Physics Letters B 34, 2040061. (https://doi.org/10.1142/S0217984920400618)

Mitić, V.V., Lazović, G., Mirjanić, D., Fecht, H., Vlahović, B., Arnold, W., 2020. The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space. Modern Physics Letters B 34, 2050421. (https://doi.org/10.1142/S021798492050421)

Mitić, V.V., Lazović, G.M., Manojlović, J.Z., Huang, W.-C., Stojiljković, M.M., Facht, H., Vlahović, B. 2020. Entropy and fractal nature. Thermal Science 24, 2203–2212. (https://doi.org/10.2298/TSCI191007451M)

Mitic, V.V., Lazovic, G., Ribar, S., Lu, C.-A., Radovic, I., Stajcic, A., Fecht, H., Vlahovic, B., 2020. The Artificial Neural Networks Applied for Microelectronics Intergranular Relations Determination. Integrated Ferroelectrics 212, 135–146. https://doi.org/10.1080/10584587.2020.1819042

Nikolic, M.V., Krstic, J.B., Labus, N.J., Lukovic, M.D., Dojcinovic, M.P., Radovanovic, M., Tadic, N.B. 2020, "Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing", Materials Science and Engineering: B, vol. 257, 114547. (https://doi.org/10.1016/j.mseb.2020.114547)

Nikolic, M.V., Vasiljević, Z.Z., Dojčinović, M.P., Vujančević, J., Radovanović, M., 2020. Impact of Microstructure on Humidity Influence on Complex Impedance of Iron Manganite, in: 2020 43rd International Spring Seminar on Electronics Technology (ISSE). Presented at the 2020 43rd International Spring Seminar on Electronics Technology (ISSE), IEEE, pp. 1–5. (https://doi.org/10.1109/ISSE49702.2020.9120967)

Obradović, N., Fahrenholtz, W.G., Filipović, S., Marković, S., Blagojević, V., Lević, S., Savić, S., Đorđević, A., Pavlović, V., 2020. Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics, Journal of Thermal Analysis and Calorimetry, vol. 140pp. 95–107. (https://doi.org/10.1007/s10973-019-08846-w)

Obradović, N., Rusmirović, J., Filipović, S., Kosanović, D., Marinković, A., Radić, D., Pavlović, V., 2020. Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal. Desalination and Water Treatment 192, 283–296. (https://doi.org/10.5004/dwt.2020.25736)

Omerašević, M., Lukić, M., Savić-Biserčić, M., Savić, A., Matović, L., Baščarević, Z., Bučevac, D. 2020, "Permanent disposal of Cs ions in the form of dense pollucite ceramics having low thermal expansion coefficient", Nuclear Engineering and Technology, vol. 52, no. 1, pp. 115-122. (https://doi.org/10.1016/j.net.2019.07.001)

Pantić, T., Milanović, I., Lukić, M., Grbović Novaković, J., Kurko, S., Biliškov, N., Milošević Govedarović, S. 2020, "The influence of mechanical milling parameters on hydrogen desorption from Mgh2-Wo3 composites", International Journal of Hydrogen Energy, vol. 45, no. 14, pp. 7901-7911 (https://doi.org/10.1016/j.ijhydene.2019.07.167)

Pantović Pavlović, M.R., Pavlović, M.M., Eraković, S., Stevanović, J.S., Panić, V.V., Ignjatović, N., 2020, "Simultaneous anodization/anaphoretic electrodeposition synthesis of nano calcium phosphate/titanium oxide composite coatings assisted with chitosan oligosaccharide lactate", Materials Letters, vol. 261, 127121. (https://doi.org/10.1016/j.matlet.2019.127121)

Paunovic, V., Mitic, V.V., Djordjevic, M., Prijic, Z., 2020. Niobium doping effect on BaTiO3 structure and dielectric properties. Ceramics International, vol. 46, no. 6, pp. 8154-8164 (https://doi.org/10.1016/j.ceramint.2019.12.043)

Popović-Maneski, L., Ivanović, M.D., Atanasoski, V., Miletić, M., Zdolšek, S., Bojović, B., Hadžievski, L. 2020, "Properties of different types of dry electrodes for wearable smart monitoring devices", Biomedical Engineering / Biomedizinische Technik, https://doi.org/10.1515/bmt-2019-0167.

Radonjic, A., Vujicic, V. 2020, "Integer Codes Correcting Burst Asymmetric Errors Within a Byte", IETE Journal of Research, https://doi.org/10.1080/03772063.2019.1593056.

Radonjic, A., Vujicic, V. 2019. Integer codes correcting burst asymmetric within a byte and double asymmetric errors. Cryptography and Communications, https://doi.org/10.1007/s12095-019-00388-0 (see also: Correction to: Integer codes correcting burst asymmetric errors within a byte and double asymmetric errors (Cryptography and Communications, (2020), 12, 2, (221-230) https://doi.org/10.1007/s12095-019-00398-y)

Radonjic, A., 2020. Integer Codes Correcting Double Errors and Triple-Adjacent Errors Within a Byte. IEEE Transactions on Very Large Scale Integration (VLSI) Systems. https://doi.org/10.1109/TVLSI.2020.2998364

Radovic, I., Stajcic, A., Radisavljevic, A., Veljkovic, F., Cebela, M., Mitic, V.V., Radojevic, V., 2020. Solvent effects on structural changes in self-healing epoxy composites. Materials Chemistry and Physics 256, 123761. (https://doi.org/10.1016/j.matchemphys.2020.123761)

Rajić, V., Stojković-Simatović, I., Veselinović, L., Čavor, J.B., Novaković, M., Popović, M., Škapin, S.D., Mojović, M., Stojadinović, S., Rac, V., Častvan, I.J., Marković, S., 2020. Bifunctional catalytic activity of Zn1-xFexO toward the OER/ORR: seeking an optimal stoichiometry. Phys. Chem. Chem. Phys. 22, 22078–22095. (https://doi.org/10.1039/D0CP03377D)

Randjelović, B.M., Mitić, V.V., Ribar, S., Lu, C.-A., Radovic, I., Stajcic, A., Novakovic, I., Vlahovic, B., 2020. Ceramics, materials, microelectronics and graph theory new frontiers. Mod. Phys. Lett. B 34, 2150159. (https://doi.org/10.1142/S0217984921501591)

Ristić, P., Blagojević, V.A., Janjić, G.V., Rodić, M., Vulić, P.J., Donnard, M., Gulea, M., Chylewska, A., Makowski, M., Todorović, T., Filipović, N.R., 2020. Influence of C–H/X (X = S, Cl, N, Pt/Pd) Interactions on the Molecular and Crystal Structures of Pt(II) and Pd(II) Complexes with Thiomorpholine-4-carbonitrile: Crystallographic, Thermal, and DFT Study. Crystal Growth & Design 20, 3018–3033. (https://doi.org/10.1021/acs.cgd.9b01661)

Ristić, P., Todorović, T.R., Blagojević, V., Klisurić, O.R., Marjanović, I., Holló, B.B., Vulić, P., Gulea, M., Donnard, M., Monge, M., Rodríguez-Castillo, M., López-de-Luzuriaga, J.M., Filipović, N.R., 2020. 1D and 2D Silver-Based Coordination Polymers with Thiomorpholine-4-carbonitrile and Aromatic Polyoxoacids as Coligands: Structure, Photocatalysis, Photoluminescence, and TD-DFT Study. Crystal Growth & Design 20, 4461–4478. https://doi.org/10.1021/acs.cgd.0c00287

Ristovski (Trifunović), J., Žižak, Ž., Marković, S., Janković, N., Ignjatović, N., 2020. Chitosan nanobeads loaded with Biginelli hybrids as cell-selective toxicity systems with a homogeneous distribution of the cell cycle in cancer treatment. RSC Advances 10, 41542–41550. https://doi.org/10.1039/D0RA08085C

Spasojević, M., Ranđić, S., Maričić, A., Trišović, T., Spasojević, Milica, 2020, "Morphological, microstructural and magnetic characteristics of electrodeposited Ni-Fe-W-Cu alloy powders", Science of Sintering, vol. 52, pp. 109–121. (https://doi.org/10.2298/SOS2001109S)

Spasojević, Milica, Ribić Zelenović, L., Spasojević, Miroslav, Trišović, T., 2020. The effect of the composition of the alloy of RuO2 and Pt nanocrystals on intermediate adsorption during methanol oxidation. Revue Roumaine de Chimie 65, 481–489. (https://doi.org/10.33224/rrch.2020.65.5.08)

Vasiljevic, Z.Z., Dojcinovic, M.P., Krstic, J.B., Ribic, V., Tadic, N.B., Ognjanovic, M., Auger, S., Vidic, J., Nikolic, M.V. 2020, "Synthesis and antibacterial activity of iron manganite (FeMnO3) particles against the environmental bacterium Bacillus subtilis", RSC Advances, vol. 10, pp. 13879–13888. (https://doi.org/10.1039/D0RA01809K)

Vasiljević, Z.Ž., Dojčinović, M., Vujančević, J., Janković Častvan, I., Ognjanović, M., Tadić, N., Stojadinović, S., Branković, G., Nikolić, M.V., 2020. Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method. Royal Society Open Science 7. (https://doi.org/10.1098/rsos.200708)

Veljković, S., Mitić, V., Paunović, V., Lazović, G., Mohr, M., Fecht, H., 2020. Analyses of the surface parameters in polycrystalline diamonds. Serbian Journal of Electrical Engineering 17, 111–129. (https://doi.org/10.2298/SJEE2001111V)

Vujicic, V., Licina, B., Pejic, D., Sovilj, P., Radonjic, A., 2020. Stochastic measurement of wind power using a two-bit A/D converter, Measurement: Journal of the International Measurement Confederation, vol. 152, 107184. (https://doi.org/10.1016/j.measurement.2019.107184)

Vukovic, M., Dinic, I., Nikolic, M.G., Marinkovic, B.A., Costa, A.M.L.M., Radulovic, K., Milosevic, O., Mancic, L., 2020, "Effects of different polymers and solvents on crystallization of theNaYF4:Yb/Er phase", Bulletin of Materials Science, vol. 43, no. 2. (https://doi.org/10.1007/s12034-019-1975-1)

Vuković, M., Mančić, L., Dinić, I., Vulić, P., Nikolić, M., Tan, Z., Milošević, O., 2019. The gadolinium effect on crystallization behavior and luminescence of ß-NaYF4:Yb,Er phase. International Journal of Applied Ceramic Technology, vol. 17, no. 3, pp. 1445-1452 (https://doi.org/10.1111/ijac.13363)

2019

Aleksić, S.O., Mitrović, N.S., Nikolić, Z., Luković, M.D., Obradović, N.N., Luković, S.G., 2019, "Three-Axis’ Heat Loss Anemometer Comprising Thick-Film Segmented Thermistors", IEEE Sensors Journal, vol. 19, pp. 10228–10235. (https://doi.org/10.1109/JSEN.2019.2929356)

Alkan, G., Yavas, H., Göksel, B., Mancic, L., Friedrich, B. & Milosevic, O. 2019, "Deep insight into the photoluminescentmonocrystalline particles: Heat-treatment,structure, mechanisms and mechanics", Journal of Materials Research and Technology, vol. 30, pp. 1409-1418 (https://doi.org/10.1016/j.jmrt.2018.10.013).

Alkan, G., Mancic, L., Tamura, S., Tomita, K., Tan, Z., Sun, F., Rudolf, R., Ohara, S., Friedrich, B., Milosevic, O., 2019, "Plasmon enhanced luminescence in hierarchically structured Ag@ (Y0.95Eu0.05)2O3 nanocomposites synthesized by ultrasonic spray pyrolysis", Advanced Powder Technology, vol. 30, pp. 1409–1418. (https://doi.org/10.1016/j.apt.2019.04.024)

Avramović, L., Maksimović, V.M., Baščarević, Z., Ignjatović, N., Bugarin, M., Marković, R. & Nikolić, N.D. 2019, "Influence of the shape of copper powder particles on the crystal structure and some decisive characteristics of the metal powders", Metals, vol. 9, no. 1, art. no. 56 (https://doi.org/10.3390/met9010056)

Bošković, I., Vukčević, M., Nenadović, S., Mirković, M., Stojmenović, M., Pavlović, V., Kljajević, L., 2019. Characterization of red mud/metakaolin-based geopolymers as modified by Ca(OH)2. Materiali in Tehnologije 53, 341–348. (https://doi.org/10.17222/mit.2018.130)

Catanzaro, V., Digilio, G., Capuana, F., Padovan, S., Cutrin, J.C., Carniato, F., Porta, S., Grange, C., Filipović, N., Stevanović, M. 2019, "Gadolinium-labelled cell scaffolds to follow-up cell transplantation by magnetic resonance imaging", Journal of Functional Biomaterials, vol. 10, no. 3, https://doi.org/10.3390/jfb10030028.

Drvenica, I., Stančić, A., Kalušević, A., Marković, S., Maksimović, J.D., Nedović, V., Bugarski, B., Ilić, V., 2019. Maltose-mediated, long-term stabilization of freeze- and spray-dried forms of bovine and porcine hemoglobin. Journal of the Serbian Chemical Society, vol. 84, 1105–1117. https://doi.org/10.2298/JSC190513067D

Đokić-Stojanović, D.R., Todorović, Z.B., Troter, D.Z., Stamenković, O.S., Veselinović, L.M., Zdujić, M.V., Manojlović, D.D. & Veljković, V.B. 2019, "Influence of various cosolvents on the calcium oxide-catalyzed ethanolysis of sunflower oil", Journal of the Serbian Chemical Society, vol. 84, no. 3, pp. 253-265. (https://doi.org/10.2298/JSC180827007D)

Filipović, N., Veselinović, L., Ražić, S., Jeremić, S., Filipič, M., Žegura, B., Tomić, S., Čolić, M., Stevanović, M. 2019, "Poly (epsilon-caprolactone) microspheres for prolonged release of selenium nanoparticles", Materials Science and Engineering C, vol. 96, pp. 776–789. (https://doi.org/10.1016/j.msec.2018.11.073)

Filipović, S., Obradović, N., Marković, S., Mitrić, M., Balać, I., Đorđević, A., Pavlović, V. 2019, "The effect of ball milling on properties of sintered manganese-doped alumina", Advanced Powder Technology, vol. 30, pp. 2533-2540 (https://doi.org/10.1016/j.apt.2019.07.033).

Filipović, S., Pavlović, V.P., Mitrić, M., Lević, S., Mitrović, N., Maričić, A., Vlahović, B., Pavlović, V.B. 2019, "Synthesis and characterization of BaTiO3/alpha-Fe2O3 core/shell structure", Journal of Advanced Ceramics, vol. 8, pp. 133–147. (https://doi.org/10.1007/s40145-018-0301-5)

Georgijević, R., Vujković, M., Gutić, S., Aliefendić, M., Jugović, D., Mitrić, M., Đokić, V. & Mentus, S. 2019, "The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution", Journal of Alloys and Compounds, vol. 776, pp. 475-485. (https://doi.org/10.1016/j.jallcom.2018.10.246)

Grgur, B.N., Janačković, M., Jugović, B.Z., Gvozdenović, M.M., 2019. "The initial characteristics of the polypyrrole based aqueous rechargeable batteries with supercapattery characteristics", Materials Science and Engineering B: Solid-State Materials for Advanced Technology, vol. 243, pp. 175–182. (https://doi.org/10.1016/j.mseb.2019.04.013)

Grgur, B.N., Gvozdenović, M.M., Jugović, B.Z., Trišović, T.L. 2019, "Characteristics of the citrate-based zinc-polyaniline secondary cell with supercapattery behavior", Journal of the Serbian Chemical Society, vol. 84, pp. 1261–1270. (https://doi.org/10.2298/JSC190709077G)

Gvozdenović, M.M., Jugović, B.Z., Jokić, B.M., Džunuzović, E.S., Grgur, B.N. 2019, "Electrochemical synthesis and characterization of poly(o-toluidine) as high energy storage material", Electrochimica Acta, vol. 317, pp. 746–752. (https://doi.org/10.1016/j.electacta.2019.06.046)

Ignjatovic, N. L., Janković, R., Uskokovic, V., Uskoković, D., 2019. Effects of Hydroxyapatite@Poly-Lactide-Co-Glycolide Nanoparticles Combined with Pb and Cd on Liver and Kidney Parenchyma after the Reconstruction of Mandibular Bone Defects, Toxicology Research, vol. 8, no. 5, pp. 287-296 (https://doi.org/10.1039/C9TX00007K).

Ignjatović, N.L., Mančić, L., Vuković, M., Stojanović, Z., Nikolić, M.G., Škapin, S., Jovanović, S., Veselinović, L., Uskoković, V., Lazić, S., Marković, S., Lazarević, M.M., Uskoković, D.P., 2019. Rare-earth (Gd 3+ ,Yb 3+ /Tm 3+ , Eu 3+ ) co-doped hydroxyapatite as magnetic, up-conversion and down-conversion materials for multimodal imaging. Scientific Reports, vol. 9, 16305. https://doi.org/10.1038/s41598-019-52885-0

Ivanovski, V.N., Belošević-Čavor, J., Rajić, V., Umićević, A., Marković, S., Kusigerski, V., Mitrić, M., Koteski, V., 2019, "A study of defect structures in Fe-alloyed ZnO: Morphology, magnetism, and hyperfine interactions", Journal of Applied Physics, vol. 126, pp. 125703. (https://doi.org/10.1063/1.5095837)

Jokić, I., Djurić, Z., Radulović, K., Frantlović, M., Krstajić, P.M., 2019, "Analysis of Intrinsic Stochastic Fluctuations of the Time Response of Adsorption-Based Microfluidic Bio/Chemical Sensors: the Case of Bianalyte Mixtures", in: 2019 IEEE 31st International Conference on Microelectronics (MIEL). Presented at the 2019 IEEE 31st International Conference on Microelectronics (MIEL), pp. 161–164. (https://doi.org/10.1109/MIEL.2019.8889579)

Jugović, D., Mitrić, M., Milović, M., Ivanovski, V.N., Škapin, S.D., Dojčinović, B., Uskoković, D. 2019. "Structural and electrochemical properties of the Li2FeP2O7/C composite prepared using soluble methylcellulose", Journal of Alloys and Compounds, vol. 786, pp. 912–919. (https://doi.org/10.1016/j.jallcom.2019.01.392)

Jugović, D., Milović, M., Popović, M., Kusigerski, V., Škapin, S., Rakočević, Z., Mitrić, M. 2019, "Effects of fluorination on the structure, magnetic and electrochemical properties of the P2-type NaxCoO2 powder", Journal of Alloys and Compounds, vol. 774, pp. 30–37. (https://doi.org/10.1016/j.jallcom.2018.09.372)

Kljajević, L.M., Melichova, Z., Kisić, D.D., Nenadović, M.T., Todorović, B.Ž., Pavlović, V.B., Nenadović, S.S., 2019. The influence of alumino-silicate matrix composition on surface hydrophobic properties. Science of Sintering 51, 163–173. (https://doi.org/10.2298/SOS1902163K)

Krueger, E., Magri, L.M.S., Botelho, A.S., Bach, F.S., Rebellato, C.L.K., Fracaro, L., Fragoso, F.Y.I., Villanova, J.A. JR, Brofman, P.R.S. & Popović-Maneski, L. 2019, "Effects of low-intensity electrical stimulation and adipose derived stem cells transplantation on the time-domain analysis-based electromyographic signals in dogs with SCI", Neuroscience letters, vol. 696, pp. 38-45. (https://doi.org/10.1016/j.neulet.2018.12.004)

Lopičić, Z.R., Stojanović, M.D., Marković, S.B., Milojković, J.V., Mihajlović, M.L., Kaluđerović Radoičić, T.S., Kijevčanin, M.L., 2019, "Effects of different mechanical treatments on structural changes of lignocellulosic waste biomass and subsequent Cu(II) removal kinetics", Arabian Journal of Chemistry, vol. 12, no. 8, pp. 4091-4103. (http://dx.doi.org/10.1016/j.arabjc.2016.04.005).

Marković, S., Simatović, I.S., Ahmetović, S., Veselinović, L., Stojadinović, S., Rac, V., Škapin, S.D., Bogdanović, D.B., Častvan, I.J., Uskoković, D. 2019, "Surfactant-assisted microwave processing of ZnO particles: a simple way for designing the surface-to-bulk defect ratio and improving photo(electro)catalytic properties", RSC Advances, vol. 9, pp. 17165–17178. (https://doi.org/10.1039/C9RA02553G)

Milović, M.D., Vasić Anićijević, D.D., Jugović, D., Anićijević, V.J., Veselinović, L., Mitrić, M., Uskoković, D. 2019, "On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study", Solid State Sciences, vol. 87, pp. 81–86. (https://doi.org/10.1016/j.solidstatesciences.2018.11.008)

Mitic, V., Lazovic, G., Paunovic, V., Hwu, J.R., Tsay, S.-C., Perng, T.-P., Veljkovic, S. & Vlahovic, B. 2019, "Ceramic materials and energy - Extended Coble's model and fractal nature", Journal of the European Ceramic Society, vol. 39, no. 12, pp. 3513-3525 (https://doi.org/10.1016/j.jeurceramsoc.2019.04.009).

Mitić, V.V., Lazović, G., Paunović, V., Cvetković, N., Jovanovic, D., Veljković, S., Ranđelović, B., Vlahović, B., 2019, "Fractal frontiers in microelectronic ceramic materials", Ceramics International, vol. 45, pp. 9679–9685. (https://doi.org/10.1016/j.ceramint.2019.01.020)

Mitić, V.V., Lazović, G., Paunović, V., Veljković, S., Ranđelović, B., Vlahović, B., Fecht, H. 2019, "Electronic ceramics fractal microstructure analysis - Minkowski Hull and grain boundaries", Ferroelectrics, vol. 545, pp. 184–194. (https://doi.org/10.1080/00150193.2019.1621704)

Munoz-Fernandez, L., Alkan, G., Milošević, O., Rabanal, M.E., Friedrich, B. 2019, "Synthesis and characterisation of spherical core-shell Ag/ZnO nanocomposites using single and two – steps ultrasonic spray pyrolysis (USP)", Catalysis Today, vol. 321–322, pp. 26–33. (https://doi.org/10.1016/j.cattod.2017.11.029)

Nikolić, I., Marković, S., Veselinović, L., Radmilović, V.V., Janković-Častvan, I., Radmilović, V.R. 2019, "Enhanced sorption of Cu2+ from sulfate solutions onto modified electric arc furnace slag", Materials Letters, vol. 235, pp. 184–188. ( https://doi.org/10.1016/j.matlet.2018.10.027)

Nikolic, M.V., Lukovic, M.D., Labus, N.J. 2019, "Influence of humidity on complex impedance and dielectric properties of iron manganite (FeMnO3)", Journal of Materials Science: Materials in Electronics, vol. 30, pp. 12399–12405. (https://doi.org/10.1007/s10854-019-01598-1)

Nikolić, N.D., Avramović, L., Ivanović, E.R., Maksimović, V.M., Baščarević, Z., Ignjatović, N. 2019, "Comparative morphological and crystallographic analysis of copper powders obtained under different electrolysis conditions", Transactions of Nonferrous Metals Society of China, vol. 29, pp. 1275–1284. (https://doi.org/10.1016/S1003-6326(19)65034-X)

Nikolic, M.V., Dojcinovic, M., Vasiljevic, Z.Z., Lukovic, M.D., Labus, N.J., 2019, "Nanocomposite Zn2SnO4/SnO2 Thick films as a Humidity Sensing Material", in: 2019 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS). Presented at the 2019 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS), IEEE, pp. 1–3. https://doi.org/10.1109/FLEPS.2019.8792304

Nikolić, M.V., Vasiljević, Z.Ž., Luković, M.D., Pavlović, V.P., Krstić, J.B., Vujančević, J., Tadić, N., Vlahović, B., Pavlović, V.B. 2019, "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen-printed thick films for application in humidity sensing", International Journal of Applied Ceramic Technology, vol. 16, pp. 981–993. (https://doi.org/10.1111/ijac.13190)

Obradović, N., Blagojević, V., Filipović, S., Đorđević, N., Kosanović, D., Marković, S., Kachlik, M., Maca, K., Pavlović, V. 2019, "Kinetics of thermally activated processes in cordierite-based ceramics", Journal of Thermal Analysis and Calorimetry, vol. 138, pp. 2989-2998. (https://doi.org/10.1007/s10973-018-7924-1).

Obradović, N., Fahrenholtz, W.G., Filipović, S., Kosanović, D., Dapčević, A., Đorđević, A., Balać, I. & Pavlović, V.B. 2019, "The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics", Ceramics International, vol. 45, no. 9, pp. 12015-12021. (https://doi.org/10.1016/j.ceramint.2019.03.095).

Obradović, N., Fahrenholtz, W.G., Filipović, S., Corlett, C., Đorđević, P., Rogan, J., Vulić, P.J., Buljak, V., Pavlović, V. 2019, "Characterization of MgAl2O4 sintered ceramics", Science of Sintering, vol. 51, no. 4, https://doi.org/10.2298/SOS1904363O

Obradović, N., Gigov, M., Đorđević, A., Kern, F., Dmitrović, S., Matović, B., Đorđević, A., Tshantshapanyan, A., Vlahović, B., Petrović, P., Pavlović, V., 2019. Shungite – a carbon-mineral rock material: Its sinterability and possible applications. Processing and Application of Ceramics, vol. 13, pp. 89–97. https://doi.org/10.2298/PAC1901089O.

Obradović, N., Pavlović, V., Kachlik, M., Maca, K., Olćan, D., Đorđević, A., Tshantshapanyan, A., Vlahović, B., Pavlović, V. 2019, "Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering", Advances in Applied Ceramics, vol. 118, no. 5, pp. 241-248. (https://doi.org/10.1080/17436753.2018.1548150).

Pantović Pavlović, M.R., Eraković, S.G., Pavlović, M.M., Stevanović, J.S., Panić, V.V., Ignjatović, N.L. 2019, "Anaphoretical/oxidative approach to the in-situ synthesis of adherent hydroxyapatite/titanium oxide composite coatings on titanium", Surface and Coatings Technology, vol. 358, pp. 688–694. (https://doi.org/10.1016/j.surfcoat.2018.12.003)

Pantović Pavlović, M.R., Pavlović, M.M., Eraković, S., Barudžija, T., Stevanović, J.S., Ignjatović, N., Panić, V.V., 2019, "Relationship between the properties of an interlayer formed by in situ Ti anodization and anaphoretically deposited hydroxyapatite", Journal of the Serbian Chemical Society, vol. 84, pp. 1305–1318. https://doi.org/10.2298/JSC190730105P

Pavlović, V.P., Vujančević, J.D., Mašković, P., Ćirković, J., Papan, J.M., Kosanović, D., Dramićanin, M.D., Petrović, P.B., Vlahović, B., Pavlović, V.B. 2019, "Structure and enhanced antimicrobial activity of mechanically activated nano TiO2", Journal of the American Ceramic Society, vol. 102, pp. 7735-7745. (https://doi.org/10.1111/jace.16668)

Popović, D.B., Topalović, I., Dedijer-Dujović, S. & Konstantinović, L. 2019, Wearable System for the Gait Assessment in Stroke Patients, Biosystems and Biorobotics, vol. 21, pp. 989-993. (https://doi.org/10.1007/978-3-030-01845-0_198)

Popović-Maneski, L., Topalović, I. 2019, "EMG Map for Designing the Electrode Shape for Functional Electrical Therapy of Upper Extremitie", Biosystems and Biorobotics, vol. 21, pp.1003–1007. (https://doi.org/10.1007/978-3-030-01845-0_201)

Porteanu, H.-E., Stefanović, I., Bibinov, N., Klute, M., Awakowicz, P., Brinkmann, R.P., Heinrich, W., 2019, "Correlated mode analysis of a microwave driven ICP source", Plasma Sources Sci. Technol., vol. 28, 035013. https://doi.org/10.1088/1361-6595/ab06a7

Radonjic, A., Vujicic, V., 2019. "Integer codes correcting sparse byte errors", Cryptography and Communication, vol. 11, pp. 1069–1077(https://doi.org/10.1007/s12095-019-0350-9)

Radonjic, A., Vujicic, V. 2019, “Integer Asymmetric Error Control Codes for Short-Range Optical Networks”, in: Advances in Engineering Research (volume 29), Nova Science Publishers, Inc., ISBN: 978-1-53615-902-8

Radonjic, A., Vujicic, V., Djordjevic-Kozarov, J., Sovilj, P. 2019, “Stochastic Digital Measurement Method and Its Application in Signal Processing”, in: Advances in Engineering Research (volume 27), Nova Science Publishers, Inc., ISBN: 978-1-53614-803-9

Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D. & Pavlović, V.B. 2019, "Controllable synthesis of Fe3O4 -wollastonite adsorbents for efficient heavy metal ions/oxyanions removal", Environmental Science and Pollution Research, vol. 26, pp. 12379-12398 (https://doi.org/10.1007/s11356-019-04625-0).

Shcherba, I.D., Antonov, V.N., Zhak, O.V., Bekenov, L.V., Kovalska, M.V., Noga, H., Uskokovic, D., Yatcyk, B.M., 2019, "Electronic structure and X-ray spectroscopic properties of the HfFe2Si2 compound", Journal of Physical Studies, vol. 23, 2301. (https://doi.org/10.30970/jps.23.2301).

Stefanović, I.S., Dostanić, J., Lončarević, D., Vasiljević-Radović, D., Ostojić, S., Marković, S., Pergal, M.V. 2019. "Preparation and characterization of poly(Urethane-siloxane)/titanium-dioxide nanocomposites", Hemijska Industrija, vol. 73, pp. 13–24. (https://doi.org/10.2298/HEMIND180530002S)

Stevanović, M., Lukić, M.J., Stanković, A., Filipović, N., Kuzmanović, M., Janićijević, Ž., 2019. Chapter 1 - Biomedical inorganic nanoparticles: preparation, properties, and perspectives, in: Grumezescu, V., Grumezescu, A.M. (Eds.), Materials for Biomedical Engineering. Elsevier, pp. 1–46. (https://doi.org/10.1016/B978-0-08-102814-8.00001-9)

Stevanović, M., 2019. Chapter 1 - Biomedical Applications of Nanostructured Polymeric Materials, in: Swain, S.K., Jawaid, M. (Eds.), Nanostructured Polymer Composites for Biomedical Applications, Micro and Nano Technologies. Elsevier, pp. 1–19. https://doi.org/10.1016/B978-0-12-816771-7.00001-6

Terzić, A., Obradović, N., Kosanović, D., Stojanović, J., Đorđević, A., Andrić, L. & Pavlović, V.B. 2019, "Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics", Ceramics International, vol. 45, no. 3, pp. 3013-3022. ( https://doi.org/10.1016/j.ceramint.2018.10.120)

Todorović, Z.B., Troter, D.Z., Đokić-Stojanović, D.R., Veličković, A.V., Avramović, J.M., Stamenković, O.S., Veselinović, Lj.M., Veljković, V.B. 2019, "Optimization of CaO-catalyzed sunflower oil methanolysis with crude biodiesel as a cosolvent", Fuel, vol. 237, pp. 903–910. (https://doi.org/10.1016/j.fuel.2018.10.056)

Topalović, I., Graovac, S., Popović, D.B. 2019, "EMG map image processing for recognition of fingers movement", Journal of Electromyography and Kinesiology, vol. 49, 102364. https://doi.org/10.1016/j.jelekin.2019.102364

Uskoković, V., Tang, S., Nikolić, M.G., Marković, S. & Wu, V.M. 2019, "Calcium phosphate nanoparticles as intrinsic inorganic antimicrobials: In search of the key particle property", Biointerphases, vol. 14, no. 3. (https://doi.org/10.1116/1.5090396)

Veljovic, Dj., Matic, T., Stamenic, T., Kojic, V., Dimitrijevic-Brankovic, S., Lukic, M.J., Jevtic, S., Radovanovic, Z., Petrovic, R., Janackovic, Dj., 2019. Mg/Cu co-substituted hydroxyapatite – Biocompatibility, mechanical properties and antimicrobial activity. Ceramics International, vol. 45, no. 17A, pp. 22029-22039. (https://doi.org/10.1016/j.ceramint.2019.07.219)

Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V. & Janaćković, Đ. 2019, "Dry-pressed anodized titania nanotube/CH 3 NH 3 PbI 3 single crystal heterojunctions: The beneficial role of N doping", Ceramics International, vol. 45, no. 8, pp. 10013-10020 (https://doi.org/10.1016/j.ceramint.2019.02.045).

Vujičić, V., Ličina, B., Pejić, D., Sovilj, P., Radonjić, A., 2019, "Stochastic measurement of wind power using a two-bit A/D converter", Measurement, 107184. (https://doi.org/10.1016/j.measurement.2019.107184)

Zdujić, M., Lukić, I., Kesić, Ž., Janković-Častvan, I., Marković, S., Jovalekić, Č. & Skala, D. 2019, "Synthesis of CaO[sbnd]SiO 2 compounds and their testing as heterogeneous catalysts for transesterification of sunflower oil", Advanced Powder Technology, vol. 30, no. 6, pp. 1141-1150. (http://dx.doi.org/10.1016/j.apt.2019.03.009).

Živojinović, J., Pavlović, V.P., Labus, N.J., Blagojević, V.A., Kosanović, D., Pavlović, V.B., 2019, "Analysis of the initial-stage sintering of mechanically activated SrTiO3", Science of Sintering, vol. 51, 199-208. (https://doi.org/10.2298/SOS1902199Z)

2018

Ajdačić, V., Nikolić, A., Simić, S., Manojlović, D., Stojanović, Z., Nikodinovic-Runic, J. & Opsenica, I.M. 2018, "Decarbonylation of Aromatic Aldehydes and Dehalogenation of Aryl Halides Using Maghemite-Supported Palladium Catalyst", Synthesis (Germany), vol. 50, no. 1, pp. 119-126. (https://doi.org/10.1055/s-0036-1590892)

Aleksić, A., Graovac, S., Maneski, L.P. & Popović, D.B. 2018, "The assessment of spasticity: Pendulum test based smart phone movie of passive markers", Serbian Journal of Electrical Engineering, vol. 15, no. 1, pp. 29-39. (https://doi.org/10.2298/SJEE1801029A)

Čobeljic, R.D., Ribarić-Jankeš, K., Aleksić, A., Popović-Maneski, L.Z., Schwirtlich, L.B., Popović, D.B. 2018, "Does galvanic vestibular stimulation decrease spasticity in clinically complete spinal cord injury?" International Journal of Rehabilitation Research, vol. 41, no. 3, pp. 251-257. (https://doi.org/10.1097/MRR.0000000000000297)

Dinić, M., Pecikoza, U., Djokić, J., Stepanović-Petrović, R., Milenković, M., Stevanović, M., Filipović, N., Begović, J., Golić, N., Lukić, J., 2018, "Exopolysaccharide Produced by Probiotic Strain Lactobacillus paraplantarum BGCG11 Reduces Inflammatory Hyperalgesia in Rats", Frontiers in Pharmacology, vol. 9, https://doi.org/10.3389/fphar.2018.00001

Dojčilović, R., Pajović, J. D., Božanić, D. K., Jović, N., Pavlović, V. P., Pavlović, V. B., Acković, L. L., Zeković, I., Dramićanin, M., Kaščaková, S., Réfrégiers, M., Rašić, G., Vlahović, B., Djoković, V. 2018, "DUV fluorescence bioimaging study of the interaction of partially reduced graphene oxide and liver cancer cells", 2D Materials, vol. 5, art. no. 045019. (https://doi.org/10.1088/2053-1583/aad72b)

Djordjevic, A., Šojić Merkulov, D., Lazarević, M., Borišev, I., Medić, I., Pavlović, V., Miljević, B., Abramović, B., 2018. Enhancement of nano titanium dioxide coatings by fullerene and polyhydroxy fullerene in the photocatalytic degradation of the herbicide mesotrione. Chemosphere, Vol. 196, pp. 145–152. (https://doi.org/10.1016/j.chemosphere.2017.12.160)

Filipović, S., Obradović, N., Marković, S., Đorđević, A., Balać, I., Dapčević, A., Rogan, J., Pavlović, V.B. 2018, "Physical Properties of Sintered Alumina Doped with Different Oxides", vol. 50,pp. 409-419 (https://doi.org/10.2298/SOS1804409F)

Habran, M., Pontón, P.I., Mančić, L., Pandoli, O., Krambrock, K., Maia da Costa, M.E.H., Letichevsky, S., Costa, A.M.L.M., Morgado, E.J., Marinković, B.A. 2018, "Visible light sensitive mesoporous nanohybrids of lepidocrocite-like ferrititanate coupled to a charge transfer complex: Synthesis, characterization and photocatalytic degradation of NO", Journal of Photochemistry and Photobiology A: Chemistry, Vol. 365, pp. 133–144. (https://doi.org/10.1016/j.jphotochem.2018.07.038)

Ignjatović, N.L., Penov-Gaši, K.M., Ajduković, J.J., Kojić, V.V., Marković, S.B., Uskoković, D.P. 2018, "The effect of the androstane lung cancer inhibitor content on the cell-selective toxicity of hydroxyapatite-chitosan-PLGA nanocomposites", Materials Science and Engineering C, vol. 89, pp. 371–377 (https://doi.org/10.1016/j.msec.2018.04.028)

Ignjatović, N.L., Sakač, M., Kuzminac, I., Kojić, V., Marković, S., Vasiljević-Radović, D., Wu, V.M., Uskoković, V., Uskoković, D.P. 2018, "Chitosan oligosaccharide lactate coated hydroxyapatite nanoparticles as a vehicle for the delivery of steroid drugs and the targeting of breast cancer cells", Journal of Materials Chemistry B, vol. 6, pp. 6957-6968 (https://doi.org/10.1039/C8TB01995A)

Ilić, B., Mitrović, A., Miličić, L. & Zdujić, M. 2018, "Compressive strength and microstructure of ordinary cured and autoclaved cement-based composites with mechanically activated kaolins", Construction and Building Materials, vol. 178, pp. 92-101. ( https://doi.org/10.1016/j.conbuildmat.2018.05.144)

Ilić, B., Mitrović, A., Radonjanin, V., Malešev, M., Zdujić, M., 2018. Compressive Strength Improvements of Cement-Based Composites Achieved with Additional Milling of Metakaolin, in: Martirena, F., Favier, A., Scrivener, K. (Eds.), Calcined Clays for Sustainable Concrete. Springer Netherlands, Dordrecht, pp. 212–218 (https://doi.org/10.1007/978-94-024-1207-9_34)

Ilić, B., Radonjanin, V., Malešev, M., Zdujić, M., Mitrović, A., 2018. Properties of the Cement-Based Composites with High Content of Metakaolin, in: Martirena, F., Favier, A., Scrivener, K. (Eds.), Calcined Clays for Sustainable Concrete. Springer Netherlands, Dordrecht, pp. 219–225 (https://doi.org/10.1007/978-94-024-1207-9_35)

Janićijević, Ž. & Radovanović, F. 2018, "Polyethersulfone/poly(acrylic acid) composite hydrogel membrane reservoirs for controlled delivery of cationic drug formulations", Polymer (United Kingdom), vol. 147, pp. 56-66.(https://doi.org/10.1016/j.polymer.2018.05.065)

Jokić, I., Djurić, Z., Radulović, K., Frantlović, M., 2018. Deterministic versus Stochastic Analysis of Competitive Adsorption in Equilibrium in Microfluidic Biosensors. Materials Today: Proceedings, 14th International Conference on Nanosciences & Nanotechnologies (NN17), 4-7 July 2017 5, Volume 5, Issue 8, Part 2, 2018, pp. 16006–16011. (https://doi.org/10.1016/j.matpr.2018.05.045)

Kosanović, D., Blagojević, V.A., Maričić, A., Aleksić, S., Pavlović, V.P., Pavlović, V.B., Vlahović, B., 2018, "Influence of mechanical activation on functional properties of barium hexaferrite ceramics", Ceramics International, vol. 44, no. 6, pp. 6666-6672. (https://doi.org/10.1016/j.ceramint.2018.01.078)

Kosanović, D. A., Blagojević, V. A., Labus, N. J., Tadić, N. B., Pavlović, V. B., Ristić, M. M. 2018, "Effect of chemical composition on microstructural properties and sintering kinetics of (Ba,Sr)TiO3 powders", Science of Sintering, vol. 50, pp. 29–38 (https://doi.org/10.2298/SOS1801029K)

Krueger, E., Popović-Maneski, L. & Nohama, P. 2018, "Mechanomyography-Based Wearable Monitor of Quasi-Isometric Muscle Fatigue for Motor Neural Prostheses", Artificial Organs, vol. 42, no. 2, pp. 208-218. (https://doi.org/10.1111/aor.12973)

Liu, H., Lukić, I., Miladinović, M.R., Veljković, V.B., Zdujić, M., Zhu, X., Zhang, Y. & Skala, D.U. 2018, "Continuous biodiesel production under subcritical condition of methanol – Design of pilot plant and packed bed reactor with MnCO3/Na-silicate catalyst", Energy Conversion and Management, vol. 168, pp. 494-504.(https://doi.org/10.1016/j.enconman.2018.05.028)

Lojpur, V., Krstić, J., Kačarević-Popović, Z., Filipović, N. & Validžić, I.L. 2018, "Flexible and high-efficiency Sb2S3/solid carrier solar cell at low light intensity", Environmental Chemistry Letters, vol. 16, no. 2, pp. 659-664. (https://doi.org/10.1007/s10311-017-0702-7)

Lović, J.D., Elezović, N.R., Jović, B.M., Zabinski, P., Gajić-Krstajić, L., Jović, V.D. 2018, "Electrodeposited AgPd alloy coatings as efficient catalysts for the ethanol oxidation reaction", International Journal of Hydrogen Energy, vol. 43, pp. 18498–18508. (https://doi.org/10.1016/j.ijhydene.2018.08.056)

Lukić, M.J., Kuzmanović, M., Sezen, M., Bakan, F., Egelja, A., Veselinović, L. 2018, "Inert atmosphere processing of hydroxyapatite in the presence of lithium iron phosphat", Journal of the European Ceramic Society, vol. 38, no. 4, pp. 2120-2133. (https://doi.org/10.1016/j.jeurceramsoc.2017.12.023)

Mancic, L., Djukic-Vukovic, A., Dinic, I., Nikolic, M.G., Rabasovic, M.D., Krmpot, A.J., Costa, A.M.L.M., Trisic, D., Lazarevic, M., Mojovic, L., Milosevic, O., 2018. NIR photo-driven upconversion in NaYF4:Yb,Er/PLGA particles for in vitro bioimaging of cancer cells. Materials Science and Engineering: C, vol. 91, pp. 597–605 (https://doi.org/10.1016/j.msec.2018.05.081)

Mancic, L., Djukic-Vukovic, A., Dinic, I., Nikolic, M.G., Rabasovic, M.D., Krmpot, A.J., Costa, A.M.L.M., Marinkovic, B.A., Mojovic, L., Milosevic, O. 2018, "One-step synthesis of amino-functionalized up-converting NaYF4:Yb,Er nanoparticles for: In vitro cell imaging", RSC Advances, Vol. 8, pp. 27429–27437. (https://doi.org/10.1039/c8ra04178d)

Matijašević, S.D., Grujić, S.R., Topalović, V.S., Nikolić, J.D., Smiljanić, S.V., Labus, N.J., Savić, V.V., 2018, "Non-isothermal crystallization of lithium germanophosphate glass studied by different kinetic methods", Science of Sintering, vol. 50, pp. 193–203. (https://doi.org/10.2298/SOS1802193M)

Milikić, J., Vasić, M., Amaral, L., Cvjetićanin, N., Jugović, D., Hercigonja, R., Šljukić, B. 2018, "NiA and NiX zeolites as bifunctional electrocatalysts for water splitting in alkaline media", International Journal of Hydrogen Energy, vol. 43, pp. 18977–18991. (https://doi.org/10.1016/j.ijhydene.2018.08.063)

Mitic, V.V., Fecht, H.-J., Mohr, M., Lazovic, G., Kocic, L., 2018, "Exploring fractality of microcrystalline diamond films", AIP Advances vol. 8, 075024 (https://doi.org/10.1063/1.5034469)

Mitic, V.V., Kocic, L., Paunovic, V., Lazović, G., Miljkovic, M., 2018. Fractal nature structure reconstruction method in designing microstructure properties. Materials Research Bulletin 101, 175–183. (https://doi.org/10.1016/j.materresbull.2018.01.019)

Mitić, V.V., Paunović, V., Lazović, G., Kocić, L. & Fecht, H. 2018, "Fractal dimension of fractals tensor product ferroelectric ceramic materials frontiers", Ferroelectrics, vol. 535, no. 1, pp. 114-119. (https://doi.org/10.1080/00150193.2018.1474653)

Mitić, V.V., Paunović, V., Lazović, G., Kocić, L. & Vlahović, B. 2018, "Clausius–Mossotti relation fractal modification", Ferroelectrics, vol. 536, no. 1, pp. 60-76. (https://doi.org/10.1080/00150193.2018.1474653)

Nikolic, M.V., Lukovic, M.D., Vasiljevic, Z.Z., Labus, N.J., Aleksic, O.S. 2018, "Humidity sensing potential of Fe2TiO5 - pseudobrookite", Journal of Materials Science: Materials in Electronics, vol. 277, pp. 654-664. (https://doi.org/10.1007/s10854-018-8951-1)

Nikolic, M.V., Vasiljevic, Z.Z., Lukovic, M.D., Pavlovic, V.P., Vujancevic, J., Radovanovic, M., Krstic, J.B., Vlahovic, B., Pavlovic, V.B., 2018. Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films, Sensors and Actuators B: Chemical, vol. 277, pp. 654–664. (https://doi.org/10.1016/j.snb.2018.09.063)

Nikolic, M. V., Lukovic, M. D., Vasiljevic, Z .Z., Vujancevic, J. 2018, "Application of Nanocrystalline Pseudobrookite (Fe2TiO5) Thick Films for Humidity Sensing", Proceedings of the International Spring Seminar on Electronics Technology, Zlatibor, Serbia, 16-20 May 2018, IEEE Computer Society, https://doi.org/10.1109/ISSE.2018.8443672

Obradović, N. & Kern, F. 2018, "Properties of 3Y-TZP zirconia ceramics with graphene addition obtained by spark plasma sintering", Ceramics International, vol. 44, no. 14, pp. 16931-16936. (https://doi.org/10.1016/j.ceramint.2018.06.133)

Pejic, D., Naumovic-Vukovic, D., Vujicic, B., Radonjic, A., Sovilj, P., Vujicic, V., 2018, "Stochastic digital DFT processor and its application to measurement of reactive power and energy", Measurement, vol. 124, pp. 494–504. (https://doi.org/10.1016/j.measurement.2018.04.004)

Peleš, A., Aleksić, O., Pavlović, V. P., Djoković, V., Dojčilović, R., Nikolić, Z., Marinković, F., Mitrić, M., Blagojević, V., Vlahović, B., Pavlović, V. B. 2018, "Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films", Physica Scripta, vol. 93, art. no. 105801 (https://doi.org/10.1088/1402-4896/aad749)

Petrovic, D., Seke, M., Borovic, M.L., Jovic, D., Borisev, I., Srdjenovic, B., Rakocevic, Z., Pavlovic, V. & Djordjevic, A. 2018, "Hepatoprotective effect of fullerenol/doxorubicin nanocomposite in acute treatment of healthy rats", Experimental and molecular pathology, vol. 104, no. 3, pp. 199-211. (https://doi.org/10.1016/j.yexmp.2018.04.005)

Petrović, P.B., Pavlović, V.B., Vlahović, B. & Mijailović, V. 2018, "A high-sensitive current-mode pressure/force detector based on piezoelectric polymer PVDF", Sensors and Actuators, A: Physical, vol. 276, pp. 165-175. (https://doi.org/10.1016/j.sna.2018.04.014)

Popović, D.B. & Bajd, T. 2018, "Pendulum test: Quantified assessment of the type and level of spasticity in persons with central nervous system lesions", Serbian Journal of Electrical Engineering, vol. 15, no. 1, pp. 1-12. (https://doi.org/10.2298/SJEE171204006P)

Popović, D.B. & Veg, A. 2018, "Active hip orthosis for assisting the training of the gait in Hemiplegics", Serbian Journal of Electrical Engineering, vol. 15, no. 2, pp. 131-143. ( https://doi.org/10.2298/SJEE171108007P)

Popović-Maneski, L., Aleksić, A., Metani, A., Bergeron, V., Čobeljić, R., Popović, D.B., 2018. Assessment of spasticity by a pendulum test in SCI patients who exercise FES cycling or receive only conventional therapy. IEEE Transactions on Neural Systems and Rehabilitation Engineering, Vol. 26, No. 1, pp. 181 - 187 (https://doi.org/10.1109/TNSRE.2017.2771466).

Popovic-Maneski, L. & Zunjic, A. 2017, "Safety and ergonomic design issues of certain types of robots" in Ergonomic Design and Assessment of Products and Systems, Nova Science Publishers, pp. 105-122. ISBN 978-153611796-7

Radonjic, A., 2018. (Perfect) Integer Codes Correcting Single Errors. IEEE Communications Letters PP, vol. 22, no. 1, pp. 17 - 20. (https://doi.org/10.1109/LCOMM.2017.2757465)

Radonjic, A., Vujicic, V., 2018, "Integer codes correcting burst and random asymmetric errors within a byte", Journal of the Franklin Institute, vol. 355, pp. 981–996. (https://doi.org/10.1016/j.jfranklin.2017.11.033)

Radosavljević-Mihajlović, A.S., Daković, A.S., Kašić, V., V.mitić, V., Stojanović, J.N., Sokić, M.D. & Marković, B.R. 2018, "Mineralogy and crystallographic properties of heu-type zeolitic tuff from the novakovic deposit, Bosnia and Herzegovina", Hemijska Industrija, vol. 72, no. 6, pp. 371-382. (http://dx.doi.org/10.2298/HEMIND180725026R)

Radovanović, M.N., Nikolić, M.P., Đurović, V.M., Jugović, B.Z., Gvozdenović, M.M., Grgur, B.N. & Knežević-Jugović, Z.D. 2018, "Polyaniline stabilization of magnetic particles and immobilization of ?-amylase", Hemijska Industrija, vol. 72, no. 1, pp. 1-12. ( https://doi.org/10.2298/HEMIND161213016R)

Rusmirović, J.D., Rančić, M.P., Pavlović, V.B., Rakić, V.M., Stevanović, S., Djonlagić, J. & Marinković, A.D. 2018, "Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances", Macromolecular Materials and Engineering, vol. 303, no. 8, 1700648. (https://doi.org/10.1002/mame.201700648)

Spasojević, M., Marković, D., Trišović, T., Spasojević, M., 2018. Mathematical Model of the Catalytic Effect of Chromium(VI) on Hypochlorite Disproportionation in Chlorate Electrolysis. J. Electrochem. Soc. 165, E8–E19. (https://doi.org/10.1149/2.0291802jes)

Stefanovic, I., Bibinov, N., Porteanu, H.-E., Klute, M., Brinkmann, R.-P., Awakowicz, P. 2018, "Optical characterization of a novel miniature microwave ICP plasma source in nitrogen flow", Plasma Sources Sci. Technol., vol. 27, no. 12. (https://doi.org/10.1088/1361-6595/aaefcc).

Terzić, A., Obradović, N., Pouchly, V., Stojanović, J., Maca, K., Pavlović, V.B. 2018, "Microstructure and phase composition of steatite ceramics sintered by traditional and spark plasma sintering", Science of Sintering, vol. 50, pp. 299–312. (https://doi.org/10.2298/SOS1803299T)

Troter, D.Z., Todorović, Z.B., Đokić-Stojanović, D.R., Veselinović, Lj.M., Zdujić, M.V., Veljković, V.B. 2018, "Choline chloride-based deep eutectic solvents in CaO-catalyzed ethanolysis of expired sunflower oil", Journal of Molecular Liquids, Vol. 266, pp. 557-567 (https://doi.org/10.1016/j.molliq.2018.06.106)

Uskoković, V., Marković, S., Veselinović, L., Škapin, S., Ignjatović, N., Uskoković, D.P. 2018, "Insights into the kinetics of thermally induced crystallization of amorphous calcium phosphate", Phys. Chem. Chem. Phys, vol. 20, pp. 29221-29235. (https://doi.org/10.1039/C8CP06460A)

Vosika, Z.B., Mitić, V.V., Lazović, G., Paunović, V. & Kocić, L. 2018, "Meso-kinetics of one time relaxation electrical processes in BaTiO3 ceramics—modified Boltzmann-Poisson model", Ferroelectrics, vol. 531, no. 1, pp. 38-50. (https://doi.org/10.1080/00150193.2018.1456116)

Vranješ Đurić, S., Ignjatović, N., 2018, "Subchapter 1.4: Radiolabeled functional nanoparticles in preventive and regenerative medicine", in: Nanotechnologies in Preventive and Regenerative Medicine: An Emerging Big Picture, Micro and Nano Technologies, Elsevier, pp. 65–92. https://doi.org/10.1016/B978-0-323-48063-5.00001-0.

Vuckovic, V., Mitic, V.V., Kocic, L., Arizanovic, B., Paunovic, V., Nikolic, R., 2018. Tesla’s Fountain – Modeling and simulation in ceramics technology. Journal of the European Ceramic Society, vol. 38, no. 8, pp. 3049-3056. (https://doi.org/10.1016/j.jeurceramsoc.2018.01.041)

Vučković, V., Mitić, V.V., Kocić, L. & Nikolić, V. 2018, "The fractal nature approach in ceramics materials and discrete field simulation", Science of Sintering, vol. 50, no. 3, pp. 371-385. (http://dx.doi.org/10.2298/SOS1803371V)

Vujančević, J., Bjelajac, A., Ćirković, J., Pavlović, Vera, Horvath, E., Forró, L., Vlahović, B., Mitrić, M., Janaćković, Đ., Pavlović, V. 2018, "Structure and photocatalytic properties of sintered TiO2 nanotube arrays", Science of Sintering, vol. 50, no. 1, pp. 39–50. (https://doi.org/10.2298/SOS1801039V)

Zec, J., Tomić, N., Zrilić, M., Marković, S., Stojanović, D., Jančić-Heinemann, R., 2018, "Processing and characterization of UHMWPE composite fibres with alumina particles in poly(ethylene-vinyl acetate) matrix", Journal of Thermoplastic Composite Materials, vol. 31, no. 5, pp. 689-708. (https://doi.org/10.1177/0892705717718240)

Zhang, Y., Liu, H., Zhu, X., Lukić, I., Zdujić, M., Shen, X. & Skala, D. 2018, "Biodiesel synthesis and kinetic analysis based on MnCO3/Na silicate as heterogeneous catalyst", Journal of the Serbian Chemical Society, vol. 83, no. 3, pp. 345-365.( https://doi.org/10.2298/JSC170612005Z)

2017

Al-Eggiely, A.H., Alguail, A.A., Gvozdenović, M.M., Jugović, B.Z., Grgur, B.N., 2017, "Seawater zinc/polypyrrole-air cell possessing multifunctional charge-discharge characteristics", Journal of Solid State Electrochemistry, Volume 21, No. 10, pp 2769–2777 (https://doi.org/10.1007/s10008-017-3597-0)

Aleksić, O.S., Vasiljević, Z.Ž., Vujković, M., Nikolić, M., Labus, N., Luković, M.D., Nikolić, M.V., 2017. Structural and electronic properties of screen-printed Fe2O3/TiO2 thick films and their photoelectrochemical behavior, Journal of Materials Science, Vol. 52, No. 10, pp 5938–5953 (https://doi.org/10.1007/s10853-017-0830-2)

Anđelković, I., Amaizah, N.R.R., Marković, S.B., Stanković, D., Marković, M., Kuzmanović, D. & Roglić, G. 2017, "Investigation of mechanism and critical parameters for removal of arsenic from water using Zr–TiO2 composite", Environmental Technology, Vol. 38, No. 17 (https://doi.org/10.1080/09593330.2016.1255664).

Begović, N.N., Vasić, M.M., Blagojević, V.A., Filipović, N.R., Marinković, A.D., Malešević, A. & Minić, D.M. 2017, "Synthesis and thermal stability of cis-dichloro[(E)-ethyl-2-(2-((8-hydroxyquinolin-2-il)methylene)hidrazinyl)acetate-k2N]-palladium(II) complex", Journal of Thermal Analysis and Calorimetry, Volume 130, Issue 2, pp 701–711 (https://doi.org/10.1007/s10973-017-6458-2).

Brajovic, L.M., Stojanovic, D.B., Mihailovic, P., Markovic, S.B., Romcevic, M., Mitric, M., Lazovic, V., Dramlic, D., Petricevic, S., Romcevic, N. 2017, "Preparation and characterization of bismuth germanium oxide (BGO) polymer composites", Journal of Alloys and Compounds, vol. 695, pp. 841–849 (http://dx.doi.org/10.1016/j.jallcom.2016.10.140)

Bratić, M., Jugović, D., Mitrić, M. & Cvjetićanin, N. 2017, "Insertion of lithium ion in anatase TiO2 nanotube arrays of different morphology", Journal of Alloys and Compounds, vol. 712, pp. 90-96. (https://doi.org/10.1016/j.jallcom.2017.04.065)

Brković, D.V., Pavlović, V.B., Pavlović, V.P., Obradović, N., Mitrić, M., Stevanović, S., Vlahović, B., Uskoković, P.S. & Marinković, A.D. 2017, "Structural properties of the multiwall carbon nanotubes/poly(methyl methacrylate) nanocomposites: Effect of the multiwall carbon nanotubes covalent functionalization", Polymer Composites, vol. 38, pp. E472-E489. (https://doi.org/10.1002/pc.23996)

Dinic, I.Z., Mancic, L.T., Rabanal, M.E., Yamamoto, K., Ohara, S., Tamura, S., Koji, T., Costa, A.M.L.M., Marinkovic, B.A., Milosevic, O.B., 2017, "Compositional and structural dependence of up-converting rare earth fluorides obtained through EDTA assisted hydro/solvothermal synthesis", Advanced Powder Technology, Vol. 28, No. 1, pp. 73-82 (http://dx.doi.org/10.1016/j.apt.2016.09.021).

Djordjevic, A., Olcan, D., Obradovic, N., Paunovic, V., Filipovic, S., Pavlovic, V. B. 2017, "Electrical properties of magnesium titanate ceramics post-sintered by hot isostatic pressing", Science of Sintering, vol. 49, no. 4, pp. 373–380 (https://doi.org/10.2298/SOS1704373D)

Filipović, S., Pavlović, V.P., Obradović, N., Paunović, V., Maca, K., Pavlović, V.B. 2017, "The impedance analysis of sintered MgTiO3 ceramics", Journal of Alloys and Compounds, vol. 701, pp. 107–115. (https://doi.org/10.1016/j.jallcom.2017.01.117)

Filipović, S., 2017." Microwave Electro Ceramic Based on Magnesium Titanate Compounds", in: Proceedings of the IV Advanced Ceramics and Applications Conference. Atlantis Press, Paris, pp. 135–153. (https://doi.org/10.2991/978-94-6239-213-7_12)

Flores-Carrasco, G., Munoz-Fernandez, L., Alcántara-Iniesta, S., Soto-Cruz, B.S., Milosevic, O., Rabanal, M.E. 2017, "Structural and functional properties of ZnO thin films grown on Si substrates by air assisted USP method from non-aqueous solutions at low-temperature", Advanced Powder Technology, Vol. 28, No. 1, 93-100 (https://doi.org/10.1016/j.apt.2016.11.016).

Gomez-Villalba, L.S., Sierra-Fernandez, A., Milosevic, O., Fort, R., Rabanal, M.E. 2017, "Atomic scale study of the dehydration/structural transformation in micro and nanostructured brucite (Mg(OH)2) particles: Influence of the hydrothermal synthesis conditions", Advanced Powder Technology, Vol. 28, No. 1, pp. 61-72. (http://dx.doi.org/10.1016/j.apt.2016.08.014)

Ignjatovic, N., Markovic, S., Jugovic, D., Uskokovic, D., 2017. Molecular designing of nanoparticles and functional materials. Journal of the Serbian Chemical Society, Vol. 82, No. 6, pp. 607-625. (https://doi.org/10.2298/JSC1612070011I)

Ilić, B., Radonjanin, V., Malešev, M., Zdujić, M. & Mitrović, A. 2017, "Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions", Construction and Building Materials, vol. 133, pp. 243-252.(https://doi.org/10.1016/j.conbuildmat.2016.12.068)

Jokic, I., Djuric, Z., Radulovic, K., Frantlovic, M., 2017. Stochastic time response of adsorption-based micro/nanobiosensors with a fluidic reaction chamber: The influence of mass transfer, in: Proceedings of the 30th IEEE International Conference on Microelectronics, MIEL 2017. IEEE, pp. 127–130. (https://doi.org/10.1109/MIEL.2017.8190084)

Jugović, D., Mitrić, M., Milović, M., Cvjetićanin, N., Jokić, B., Umićević, A., Uskoković, D. 2017, "The influence of fluorine doping on the structural and electrical properties of the LiFePO4 powder", Ceramics International, vol. 43, pp. 3224–3230 (https://doi.org/10.1016/j.ceramint.2016.11.149)

Karan, B. 2017, "Serbia Robotics Hall of Fame: The Impact of the Past", in: Rodić, A., Borangiu, T. (Eds.), Advances in Robot Design and Intelligent Control, Springer International Publishing, Cham, pp. 631–639. (https://doi.org/10.1007/978-3-319-49058-8_69)

Kljajević, L.M., Nenadović, S.S., Nenadović, M.T., Bundaleski, N.K., Todorović, B.Ž., Pavlović, V.B. & Rakočević, Z.L. 2017, "Structural and chemical properties of thermally treated geopolymer samples", Ceramics International, vol. 43, no. 9, pp. 6700-6708. (https://doi.org/10.1016/j.ceramint.2017.02.066)

Labus, N., Vasiljević, Z.Z., Vasiljević-Radović, D., Rakić, S., Nikolić, M.V. 2017, "Two step sintering of ZnTiO3 nanopowder", Science of Sintering, Vol. 49, No. 1, pp. 51–60. (https://doi.org/10.2298/SOS1701051L)

Labus, N., Vasiljevic, Z., Aleksic, O., Lukovic, M., Markovic, S., Pavlovic, V., Mentus, S., Nikolic, M.V. 2017, "Characterisation of Mn0.63Zn0.37Fe2O4 powders after intensive milling and subsequent thermal treatment", Science of Sintering, vol. 49, no. 4, pp. 455–467. (https://doi.org/10.2298/SOS1704455L)

Lukić, M.J., Sezen, M., Veljović, Đ., Mraković, A. 2017, "A facile route for hydroxyapatite densification with an increased heating rate, Materials Letters, vol. 207, pp. 12-15. (https://doi.org/10.1016/j.matlet.2017.07.020)

Lukovic, M.D., Nikolic, M.V., Vasiljevic, Z.Z., Blaz, N., Lukovic, S., Aleksic, O.S., 2017. Impedance response of pseudobrookite thick films with a sandwich configuration, in: 2017 40th International Spring Seminar on Electronics Technology (ISSE). Presented at the 2017 40th International Spring Seminar on Electronics Technology (ISSE), IEEE, pp. 1–5. https://doi.org/10.1109/ISSE.2017.8000886

Mancic, L., Nikolic, M., Gomez, L., Rabanal, M.E., Milosevic, O. 2017, "The processing of optically active functional hierarchical nanoparticles", Advanced Powder Technology, vol. 28, no. 1, pp. 3-22. (https:/doi.org/10.1016/j.apt.2016.09.018)

Marković, S., Stanković, A., Dostanić, J., Veselinović, L., Mančić, L., Škapin, S.D., Dražič, G., Janković-Častvan, I. & Uskoković, D. 2017, "Simultaneous enhancement of natural sunlight- and artificial UV-driven photocatalytic activity of a mechanically activated ZnO/SnO2 composite", RSC Advances, vol. 7, no. 68, pp. 42725-42737. (https://doi.org/10.1039/C7RA06895F)

Marković, S., Uskoković, D., 2017. "Tailoring and Processing of Defect Free Barium Titanate Stannate Functionally Graded Ceramics: BTS2.5/BTS5/BTS7/BTS10 FGMs", in: Proceedings of the IV Advanced Ceramics and Applications Conference. Atlantis Press, Paris, pp. 417–433 (https://doi.org/10.2991/978-94-6239-213-7_29)

Metani, A., Popović-Maneski, L., Mateo, S., Lemahieu, L., Bergeron, V., n.d. Functional electrical stimulation cycling strategies tested during preparation for the First Cybathlon Competition – a practical report from team ENS de Lyon. European Journal of Translational Myology 27, 279–288. https://doi.org/10.4081/ejtm.2017.7110

Milutinov, M.M., Nikolić, M.V., Luković, S.G., Blaž, N., Labus, N., Aleksić, O.S., Živanov, L.D. 2017, "Influence of starting powder milling on magnetic properties of Mn-Zn ferrite", Processing and Application of Ceramics, Vol. 11, 160–169. (https://doi.org/10.2298/PAC1702160M)

Miskovic, G., Nikolic, M.V., Lukovic, M.D., Vasiljevic, Z.Z., Nicolics, J., Aleksic, O.S., 2017. Pseudobrookite thick films for potential application as low-temperature sensitive material in NO gas sensors, in: 2017 40th International Spring Seminar on Electronics Technology (ISSE). Presented at the 2017 40th International Spring Seminar on Electronics Technology (ISSE), IEEE, pp. 1–6. https://doi.org/10.1109/ISSE.2017.8000881

Mitić, Ž., Stolić, A., Stojanović, S., Najman, S., Ignjatović, N., Nikolić, G., Trajanović, M. 2017. "Instrumental methods and techniques for structural and physicochemical characterization of biomaterials and bone tissue: A review", Materials Science and Engineering: C, vol. 79, pp. 930-949 (https://doi.org/10.1016/j.msec.2017.05.127).

Munoz-Fernandez, L., Sierra-Fernandez, A., Flores-Carrasco, G., Milošević, O. & Rabanal, M.E. 2017, "Solvothermal synthesis of Ag/ZnO micro/nanostructures with different precursors for advanced photocatalytic applications", Advanced Powder Technology,vol. 28, no. 1, pp. 83-92 (https://doi.org/10.1016/j.apt.2016.09.033).

Najdanović, J.G., Najman, S.J., Stojanović, S., Živković, J.M., Ignjatović, N., Uskoković, D., Trajanović, M., 2017. "The Influence of Nanomaterial Calcium Phosphate/poly-(dl-lactide-co-glycolide) on Proliferation and Adherence of HeLa Cells", in: Proceedings of the IV Advanced Ceramics and Applications Conference. Atlantis Press, Paris, pp. 387–400. (https://doi.org/10.2991/978-94-6239-213-7_27)

Nedeljković, B., Mitrović, N., Orelj, J., Obradović, N. & Pavlović, V. 2017, "Characterization of FeCoV alloy processed by PIM/MIM route", Science of Sintering, vol. 49, no. 3, pp. 299-309. (https://doi.org/10.2298/SOS1703299N)

Nenadović, S.S., Kljajević, L.M., Nešić, M.A., Petković, M.Ž., Trivunac, K.V., Pavlović, V.B. 2017, "Structure analysis of geopolymers synthesized from clay originated from Serbia", Environmental Earth Sciences, 76, 79 (https://doi.org/10.1007/s12665-016-6360-4)

Nikolic, M.V., Sekulic, D.L., Vasiljevic, Z.Z., Lukovic, M.D., Pavlovic, V.B., Aleksic, O.S. 2017, "Dielectric properties, complex impedance and electrical conductivity of Fe2TiO5 nanopowder compacts and bulk samples at elevated temperatures", Journal of Materials Science: Materials in Electronics, Vol. 28, No. 6, pp 4796–4806 (https://doi.org/10.1007/s10854-016-6125-6).

Nikolić, V., Mitić, V.V., Kocić, L., Petković, D. 2017, "Wind speed parameters sensitivity analysis based on fractals and neuro-fuzzy selection technique", Knowledge and Information Systems, Vol. 52, No.1, pp 255–265 (https://doi.org/10.1007/s10115-016-1006-0).

Obradović, N., Filipović, S., Marković, S., Mitrić, M., Rusmirović, J., Marinković, A., Antić, V. & Pavlović, V. 2017, "Influence of different pore-forming agents on wollastonite microstructures and adsorption capacities", Ceramics International, vol. 43, no. 10, pp. 7461-7468 (https://doi.org/10.1016/j.ceramint.2017.03.021).

Obradović, N., Filipović, S., Rusmirović, J., Postole, G., Marinković, A., Radić, D., Rakić, V., Pavlović, V. & Auroux, A. 2017, "Formation of porous wollastonite-based ceramics after sintering with yeast as the pore-forming agent", Science of Sintering, vol. 49, no. 3, pp. 235-246. (https://doi.org/10.2298/SOS1703235O)

Omymen, W.M., Rogan, J.R., Jugović, B.Z., Gvozdenović, M.M. & Grgur, B.N. 2017, "Photo-assisted electrochemical oxidation of the urea onto TiO2-nanotubes modified by hematite", Journal of Saudi Chemical Society, Vol. 21, No. 8, December 2017, Pages 990-997. (https://doi.org/10.1016/j.jscs.2017.05.010)

Pavlović, V.B., Vulićević, Z., Pavlović, V.P., 2017, "Contemporary Dental Ceramics", in: Proceedings of the IV Advanced Ceramics and Applications Conference. Atlantis Press, Paris, pp. 95–119 ( https://doi.org/10.2991/978-94-6239-213-7_9)

Petković, D., Nikolić, V., Mitić, V.V. & Kocić, L. 2017, "Estimation of fractal representation of wind speed fluctuation by artificial neural network with different training algorothms", Flow Measurement and Instrumentation, vol. 54, pp. 172-176. (https://doi.org/10.1016/j.flowmeasinst.2017.01.007)

Popović, D., 2017. Control of functional electrical stimulation for restoration of motor function. Facta Universitatis, Series: Electronics and Energetics 30, 295–312. (https://doi.org/10.2298/FUEE1703295P)

Popović-Maneski, L., Aleksić, A., Čobeljić, R., Bajd, T., Popović, D.B., 2017, "A new method and instrumentation for analyzing spasticity", IETI Transactions on Ergonomics and Safety, vol. 1, issue 1, 12-27.

Požega, E., Nikolić, P., Bernik, S., Gomidželović, L., Labus, N., Radovanović, M., Marjanović, S., 2017. Synthesis and investigation of BiSbTeSe single crystal doped with Zr produced using Bridgman method. Revista de Metalurgia 53, 3, http://revistademetalurgia.revistas.csic.es/index.php/revistademetalurgia/article/view/1417/1645.

Radonjic, A. & Vujicic, V. 2017, "Integer codes correcting high-density byte asymmetric errors", IEEE Communications Letters, vol. 21, no. 4, pp. 694-697. (https://doi.org/10.1109/LCOMM.2016.2644661)

Radonjic, A., Vujicic, V., 2017, "Integer codes correcting single errors and burst asymmetric errors within a byte", Information Processing Letters, vol. 121, pp. 45–50. (https://doi.org/10.1016/j.ipl.2017.01.010)

Rusmirović, J.D., Ivanović, J.Z., Pavlović, V.B., Rakić, V.M., Rančić, M.P., Djokić, V., Marinković, A.D. 2017, "Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites", Carbohydrate Polymers, vol. 164, pp. 64–74. (https://doi.org/10.1016/j.carbpol.2017.01.086)

Shcherba, I.D., Kostyk, L.V., Noga, H., Bekenov, L.V., Uskokovich, D., Jatsyk, B.M. 2017, "X-ray spectra and electronic structure of the Ca3Ga2Ge3?12 compound", Solid State Sciences, vol. 71, pp. 1–2 (https://doi.org/10.1016/j.solidstatesciences.2017.06.014)

Stevanović, M., 2017. Polymeric micro- and nanoparticles for controlled and targeted drug delivery, in: Nanostructures for Drug Delivery. Elsevier, pp. 355–378. (https://doi.org/10.1016/B978-0-323-46143-6.00011-7)

Tadic, M., Kopanja, L., Panjan, M., Kralj, S., Nikodinovic-Runic, J. & Stojanovic, Z. 2017, "Synthesis of core-shell hematite (alpha-Fe2O3) nanoplates: Quantitative analysis of the particle structure and shape, high coercivity and low cytotoxicity", Applied Surface Science, vol. 403, pp. 628-634.(https://doi.org/10.1016/j.apsusc.2017.01.115)

Tasić, A., Rusmirović, J.D., Nikolić, J., Božić, A., Pavlović, V., Marinković, A.D. & Uskoković, P.S. 2017, "Effect of the vinyl modification of multi-walled carbon nanotubes on the performances of waste poly(ethylene terephthalate)-based nanocomposites", Journal of Composite Materials, vol. 51, no. 4, pp. 491-505.(https://doi.org/10.1177/0021998316648757)

Terzić, A., Đorđević, N., Mitrić, M., Marković, S., Đorđević, K. & Pavlović, V.B. 2017, "Sintering of fly ash based composites with zeolite and bentonite addition for application in construction materials", Science of Sintering, vol. 49, no. 1, pp. 23-37. (https://doi.org/10.2298/SOS1701023T)

Terzić, A., Obradović, N., Stojanović, J., Pavlović, V., Andrić, L., Olćan, D., Đorđević, A. 2017, "Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials", Ceramics International, Vol. 43, No. 16, pp. 13264-13275(https://doi.org/10.1016/j.ceramint.2017.07.024).

Terzić, A., Pezo, L., Andrić, L., Pavlović, V.B. & Mitić, V.V. 2017, "Optimization of bentonite clay mechano-chemical activation using artificial neural network modeling", Ceramics International, vol. 43, no. 2, pp. 2549-2562. (https://doi.org/10.1016/j.ceramint.2016.11.058)

Topličić-Ćurčić, G., Mitic, V., Grdić, D., Ristić, N., Grdić, Z., 2017. Environmental Aspects of Red Mud and Its Utilization as a Component of Building Materials, in: Proceedings of the IV Advanced Ceramics and Applications Conference. Atlantis Press, Paris, pp. 447–474. (https://doi.org/10.2991/978-94-6239-213-7_31)

Urekar, M., Pejic, D., Vujicic, V. & Avramov-Zamurovic, S. 2017, "Accuracy improvement of the stochastic digital electrical energy meter", Measurement, vol. 98, pp. 139-150.(https://doi.org/10.1016/j.measurement.2016.11.038)

Urekar, M. & Vujicic, V. 2017, "Optimal resolution of a Flash ADC for the high precision electrical energy stochastic digital measurement method", 17th IEEE International Conference on Smart Technologies, EUROCON 2017 - Conference Proceedings, Article number 8011228, pp. 832-837. (https://doi.org/10.1109/EUROCON.2017.8011228)

Vosika, Z., Mitić, V.V., Vasić, A., Lazović, G., Matija, L. & Kocić, L.M. 2017, "Multistep generalized transformation method applied to solving equations of discrete and continuous time-fractional enzyme kinetics", Communications in Nonlinear Science and Numerical Simulation, vol. 44, pp. 373-389. (https://doi.org/10.1016/j.cnsns.2016.08.024)

Vosika, Z.B., Mitic, V.V., Lazovic, G.M., Kocic, L. 2017, "Discrete temperature values in the sintering process as a BaTiO3-ceramics properties parameter", Science of Sintering, vol. 49, no. 4, pp. 469–477. (https://doi.org/10.2298/SOS1704469V)

Vosika, Z., Lazović, G., Mitic, V., Kocić, L., 2017. Multistep Transformation Method for Discrete and Continuous Time Enzyme Kinetics, in: Proceedings of the IV Advanced Ceramics and Applications Conference. Atlantis Press, Paris, pp. 303–316. (https://doi.org/10.2991/978-94-6239-213-7_22)

Vujicic, B., Zupunski, L., Sovilj, P. & Radonjic, A. 2017, "Reconstruction of an analog signal measured using two-bit stochastic digital measurement method", 17th IEEE International Conference on Smart Technologies, EUROCON 2017 - Conference Proceedings, Article number 8011227, pp. 829-831 (https://doi.org/10.1109/EUROCON.2017.8011227)

Zdravković, J.D., Poleti, D.D., Rogan, J.R., Blagojević, V.A., Szécsényi, K.M. & Minić, D.M. 2017, "The influence of alkaline cations on the mechanism and kinetics of dehydration of polymeric phthalatocuprate(II) dihydrates", Journal of Analytical and Applied Pyrolysis, Vol. 126, pp. 323-331. (https://doi.org/10.1016/j.jaap.2017.05.014)

Živojinović, J., Pavlović, V.P., Kosanović, D., Marković, S., Krstić, J., Blagojević, V.A., Pavlović, V.B. 2017, "The influence of mechanical activation on structural evolution of nanocrystalline SrTiO3 powders", Journal of Alloys and Compounds, vol. 695, pp. 863–870 (http://dx.doi.org/10.1016/j.jallcom.2016.10.159).

2016

Ajduković, Z., Mladenović-Antić, S., Ignjatović, N., Stojanovic, Z., Kocić, B., Najman, S., Petrović, N., Uskoković, D. 2016, "In vitro evaluation of nanoscale hydroxyapatite-based bone reconstructive materials with antimicrobial properties", Journal of Nanoscience and Nanotechnology, vol. 16, pp. 1420-1428 (https://doi.org/10.1166/jnn.2016.10699).

Al-Eggiely, A.H., Alguail, A.A., Gvozdenović, M., Jugović, B.Z., Grgur, B.N. 2016, "Zinc Polypyrrole-air Sea Water Battery", International Journal of Electrochemical Science, vol. 11, pp. 10270–10277. (https://doi.org/10.20964/2016.12.35)

Alguail, A.A., Al-Eggiely, A.H., Gvozdenović, M.M., Jugović, B.Z., Grgur, B.N., 2016, "Battery type hybrid supercapacitor based on polypyrrole and lead-lead sulfate", Journal of Power Sources, vol. 313, pp. 240–246 (http://dx.doi.org/10.1016/j.jpowsour.2016.02.081)

Balanč, B., Trifković, K., Đorđević, V., Marković, S., Pjanović, R., Nedović, V., Bugarski, B. 2016, "Novel resveratrol delivery systems based on alginate-sucrose and alginate-chitosan microbeads containing liposomes", Food Hydrocolloids, vol. 61, pp. 832–842 (http://dx.doi.org/10.1016/j.foodhyd.2016.07.005).

Barreto Carneiro, M., Mancic, L., Santos, C., Marinkovic, B.A., 2016. Development of alpha-Al2O3 Ceramics for Bottom of Sintering Impeller Furnace. Materials Science Forum 881, 91–96. (https://doi.org/10.4028/www.scientific.net/MSF.881.91)

Blagojević, V.A., Lukić, V., Begović, N.N., Maričić, A.M., Minić, D.M. 2016, "Hydrogen storage in a layered flexible [Ni2(btc)(en)2]n coordination polyme", International Journal of Hydrogen Energy, vol. 41, no. 47, pp. 22171–22181 (http://dx.doi.org/10.1016/j.ijhydene.2016.08.203)

Bobić, B., Jegdić, B., Jugović, B., Stevanović, J., Gligorijević, B., Murariu, A., 2016, "Failures of brass condenser tubes", Structural Integrity and Life, vol. 16, pp. 19–23.

Carević, M.V., Abazović, N.D., Novaković, T.B., Pavlović, V.B., Čomor, M.I., 2016, "Zirconium dioxide nanopowders with incorporated Si4+ ions as efficient photocatalyst for degradation of trichlorophenol using simulated solar light", Applied Catalysis B: Environmental vol. 195, pp. 112–120 (http://dx.doi.org/10.1016/j.apcatb.2016.05.005)

Cebela, M., Jankovic, B., Hercigonja, R., Lukic, M.J., Dohcevic-Mitrovic, Z., Milivojevic, D. & Matovic, B. 2016, "Comprehensive characterization of BiFeO3 powder synthesized by the hydrothermal procedure", Processing and Application of Ceramics, vol. 10, no. 4, pp. 201-208. (DOI:10.2298/PAC1604201C)

Dinic, I.Z., Rabanal, M.E., Yamamoto, K., Tan, Z., Ohara, S., Mancic, L.T. & Milosevic, O.B. 2016, "PEG and PVP assisted solvothermal synthesis of NaYF4: Yb3+/Er3+ up-conversion nanoparticles", Advanced Powder Technology, vol. 27, no. 3, pp. 845–853 (http://dx.doi.org/10.1016/j.apt.2015.11.010).

Đorđević, A., Dinkić, J., Stevanović, M., Olćan, D., Filipović, S., Obradović, N. 2016, "Measurement of Permittivity of Solid and Liquid Dielectrics in Coaxial Chambers", Microwave Review, vol. 22, no. 2, pp. 3-9.

Đorđević, Lj., Najman, S., Vasiljević, P., Miljković, M., Ignjatović, N., Uskoković, D., Plavšić, M. 2016, "Scanning electron microscopy analysis of changes of hydroxiapatite/poly-l-lactide with different molecular weight of PLLA after intraperitoneal implantation", Acta Veterinaria Belgrade, vol. 66, pp. 234–244. (http://dx.doi.org/10.1515/acve-2016-0020)

Filipović, N.R., Bjelogrlic, S., Todorović, T.R., Blagojevic, V., Muller, C.D., Marinković, A., Vujčić, M., Janovic, B., Malesevic, A., Begović, N., Sencanski, M., Minic, D. 2016, "Ni(II) complex with bishydrazone ligand: synthesis, characterization, DNA binding studies and pro–apoptotic and pro–differentiation induction in human cancerous cell lines", RSC Advances, vol. 6, pp. 108726-108740 (http://dx.doi.org/10.1039/C6RA24604D).

Filipović, S., Obradović, N., Pavlović, V.B., Mitrić, M., Đorđević, A., Kachlik, M., Maca, K., 2016, "Effect of consolidation parameters on structural, microstructural and electrical properties of magnesium titanate ceramics", Ceramics International, vol. 42, no. 8, pp. 9887–9898. http://dx.doi.org/10.1016/j.ceramint.2016.03.088

Flores-Carrasco, G., Carrillo-López, J., Martínez-Martínez, R., Espinosa-Torres, N.D., Munoz, L., Milosevic, O. & Rabanal, M.E. 2016, "Optical and morpho-structural properties of ZnO nanostructured particles synthesized at low temperature via air-assisted USP method", Applied Physics A: Materials Science and Processing, vol. 122, no. 3.(http://dx.doi.org/10.1007/s00339-016-9708-4)

Gajić-Krstajić, Lj.M., Elezović, N.R., Jović, B.M., Martelli, G.N., Jović, V.D. & Krstajić, N.V. 2016, "Fe–Mo alloy coatings as cathodes in chlorate production process", Hemijska Industrija, vol. 70, no. 1, pp. 81-89.(http://dx.doi.org/10.2298/HEMIND150119014G)

Luković Golić, D., Radojković, A., Ćirković, J., Dapčević, A., Pajić, D., Tasić, N., Savić, S.M., Počuča-Nešić, M., Marković, S., Branković, G., Stanojević, Z.M., Branković, Z., 2016, "Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods", Journal of the European Ceramic Society, vol. 36, pp. 1623–1631 ( http://dx.doi.org/10.1016/j.jeurceramsoc.2016.01.031)

Grgur, B. N., Jugović, B. Z., Gvozdenović, M. M. 2016, "Oxygen reduction on SILAR deposited iron oxide onto graphite felt electrode", Electrochimica Acta, vol. 212, pp. 254-259 (http://dx.doi.org/10.1016/j.electacta.2016.07.029)

Ignjatović, N.L., Penov-Gaši, K.M., Wu, V.M., Ajduković, J.J., Kojić, V.V., Vasiljević-Radović, D., Kuzmanović, M., Uskoković, V., Uskoković, D.P. 2016, "Selective anticancer activity of hydroxyapatite/chitosan-poly(d,l)-lactide-co-glycolide particles loaded with an androstane-based cancer inhibitor", Colloids and Surfaces B: Biointerfaces, vol. 148, pp. 629–639 (http://dx.doi.org/10.1016/j.colsurfb.2016.09.041)

Ignjatović, N., Wu, V., Ajduković, Z., Mihajilov-Krstev, T., Uskoković, V., Uskoković, D., 2016, "Chitosan-PLGA polymer blends as coatings for hydroxyapatite nanoparticles and their effect on antimicrobial properties, osteoconductivity and regeneration of osseous tissues", Materials Science and Engineering: C, vol. 60, pp. 357–364 (http://dx.doi.org/10.1016/j.msec.2015.11.061).

Ilić, B., Radonjanin, V., Malešev, M., Zdujić, M., Mitrović, A., 2016, "Effects of mechanical and thermal activation on pozzolanic activity of kaolin containing mica", Applied Clay Science, vol. 123, pp. 173–181. (http://dx.doi.org/10.1016/j.clay.2016.01.029)

Janićijević, Ž., Lukić, M.J., Veselinović, Lj. 2016, "Alternating current electric field modified synthesis of hydroxyapatite bioceramics", Materials & Design, vol. 109, pp. 511–519 (http://dx.doi.org/10.1016/j.matdes.2016.07.061).

Jović, B.M., Lačnjevac, U.Č., Jović, V.D., Gajić-Krstajić, L., Kovač, J., Poleti, D., Krstajić, N.V. 2016, "Ni-(Ebonex-supported Ir) composite coatings as electrocatalysts for alkaline water electrolysis. Part II: Oxygen evolution", International Journal of Hydrogen Energy, vol. 41, no. 45, pp. 20502 - 20514 (http://dx.doi.org/10.1016/j.ijhydene.2016.08.226).

Jugović, B., Grgur, B., Antov, M., Knežević-Jugović, Z., Stevanović, J. & Gvozdenović, M. 2016, "Polypyrrole-based enzyme electrode with immobilized glucose oxidase for electrochemical determination of glucose", International Journal of Electrochemical Science, vol. 11, no. 2, pp. 1152-1161.

Kesić Ž., Lukić I., Zdujić M., Jovalekić Č., Veljković V. & Skala D. 2016, "Assessment of CaTiO3, CaMnO3, CaZrO3 and Ca2Fe2O5 perovskites as heterogeneous base catalysts for biodiesel synthesis", Fuel Processing Technology, vol. 143, pp. 162-168 (http://dx.doi.org/10.1016/j.fuproc.2015.11.018)

Kosanović, D., Obradović, N., Pavlović, V.P., Marković, S., Maričić, A., Rasić, G., Vlahović, B., Pavlović, V.B. & Ristić, M.M. 2016, "The influence of mechanical activation on the morphological changes of Fe/BaTiO3 powder", Materials Science and Engineering B: Solid-State Materials for Advanced Technology, vol. 212, pp. 89-95. (http://dx.doi.org/10.1016/j.mseb.2016.07.016)

Lukić, I., Kesić, Ž., Zdujić, M., Skala, D., 2016, "Calcium diglyceroxide synthesized by mechanochemical treatment, its characterization and application as catalyst for fatty acid methyl esters production", Fuel, vol. 165, pp. 159-165 (http://dx.doi.org/10.1016/j.fuel.2015.10.063).

Mancic, L., Pontón, P.I., Letichevsky, S., Costa, A.M., Marinkovic, B.A., Rizzo, F.C., 2016, "Application of silane grafted titanate nanotubes in reinforcing of polyamide 11 composites", Composites Part B: Engineering, vol. 93, pp. 153–162 (http://dx.doi.org/10.1016/j.compositesb.2016.03.028).

Marković, S., Rajić, V., Stanković, A., Veselinović, L., Belošević-Čavor, J., Batalović, K., Abazović, N., Škapin, S.D. & Uskoković, D. 2016, "Effect of PEO molecular weight on sunlight induced photocatalytic activity of ZnO/PEO composites", Solar Energy, vol. 127, pp. 124-135. (http://dx.doi.org/10.1016/j.solener.2016.01.026)

Milović, M., Jugović, D., Mitrić, M., Dominko, R., Stojković-Simatović, I., Jokić, B., Uskoković, D. 2016, "The use of methylcellulose for the synthesis of Li2FeSiO4/C composites", Cellulose, vol. 23, no. 1, pp. 239-246 (http://dx.doi.org/10.1007/s10570-015-0806-9).

Milutinov, M., Nikolic, M.V., Lukovic, M.D., Blaz, N., Labus, N., Zivanov, L.D., Aleksic, O.S. 2016, "Influence of starting powder milling on structural properties, complex impedance, electrical conductivity and permeability of Mn–Zn ferrite" Journal of Materials Science: Materials in Electronics, vol. 27, no. 11, pp. 11856–11865 (http://dx.doi.org/10.1007/s10854-016-5328-1).

Miskovic, G., Aleksic, O.S., Nikolic, M.V., Nicolics, J., Radosavljevic, G., Vasiljevic, Z.Z., Lukovic, M.D., Smetana, W. 2016. "Nanostructured SnO 2 thick films for gas sensor application: analysis of structural and electronic properties", IOP Conference Series: Matererials Science and Engineering, vol. 108, 12003 (http://dx.doi.org/10.1088/1757-899X/108/1/012003)

Miskovic, G., Lukovic, M.D., Nikolic, M.V., Vasiljevic, Z.Z., Nicolics, J., Aleksic, O.S. 2016, "Analysis of electronic properties of pseudobrookite thick films with possible application for NO gas sensing", in: Proceedings of the International Spring Seminar on Electronics Technology. Presented at the 39th International Spring Seminar on Electronics Technology, ISSE 2016; Pilsen; Czech Republic; 18 May 2016 through 22 May 2016, IEEE, pp. 386–391. http://dx.doi.org/10.1109/ISSE.2016.7563226.

Mitic, V.V., Paunovic, V. & Kocic, L. 2016, "Higher electronics circuit integrations within the fractal electronics frontiers", Journal of Ceramic Science and Technology, vol. 7, no. 4, pp. 365-378. (http://dx.doi.org/10.4416/JCST2016-00047)

Munoz-Fernandez, L., Sierra-Fernandez, A., Milošević, O., Rabanal, M.E., 2016, "Solvothermal synthesis of Ag/ZnO and Pt/ZnO nanocomposites and comparison of their photocatalytic behaviors on dyes degradation", Advanced Powder Technology, vol. 27, no. 3, pp. 983–993, http://dx.doi.org/10.1016/j.apt.2016.03.021.

Niklioć, I., Marković, S., Janković – Častvan, I., Radmilović, V.V., Karanović, L., Babić, B., Radmilović, V.R., 2016, "Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag", Materials Letters, vol. 176, pp. 301–305 (http://dx.doi.org/10.1016/j.matlet.2016.04.121)

Obradović N., Đorđević N., Filipović S., Marković S., Kosanović D., Mitrić M. & Pavlović V. 2016, "Reaction kinetics of mechanically activated cordierite-based ceramics studied via DTA", Journal of Thermal Analysis and Calorimetry, vol. 124, no. 2, pp. 667-673(http://dx.doi.org/10.1007/s10973-015-5132-9).

Obradović, N., Filipović, S., Đorđević, N., Kosanović, D., Marković, S., Pavlović, V., Olćan, D., Djordjević, A., Kachlik, M., Maca, K 2016, "Effects of mechanical activation and two-step sintering on the structure and electrical properties of cordierite-based ceramics", Ceramics International, vol. 42, no. 12, pp. 13909 13918 (http://dx.doi.org/10.1016/j.ceramint.2016.05.201).

Obradović, N., Filipović, S., Đorđević, N., Kosanović, D., Pavlović, V., Olćan, D., Đorđević, A., Kachlik, M. & Maca, K. 2016, "Microstructural and electrical properties of cordierite-based ceramics obtained after two-step sintering technique", Science of Sintering, vol. 48, no. 2, pp. 157-165. (https://doi.org/10.2298/SOS1602157O)

Omymen, W.M., Ebshish, A.S., Jugović, B.Z., Trišović, T.L., Gvozdenović, M.M., Grgur, B.N., 2016, "Photoelectochemical behavior of TiO2-NT's modified with SILAR deposited iron oxide", Electrochimica Acta, vol. 203, pp. 136–143 (http://dx.doi.org/10.1016/j.electacta.2016.04.038)

Paunovic, V., Mitic, V.V., Kocic, L. 2016, "Dielectric characteristics of donor-acceptor modified BaTiO3 ceramics", Ceramics International, vol. 42, 11692–11699. (https:/doi.org/10.1016/j.ceramint.2016.04.087)

Popović Maneski, L., Topalović, I., Jovičić, N., Dedijer, S., Konstantinović, L. & Popović, D.B. 2016, "Stimulation map for control of functional grasp based on multi-channel EMG recordings", Medical Engineering and Physics, vol. 38, no. 11, pp. 1251–1259 (http://dx.doi.org/10.1016/j.medengphy.2016.06.004).

Radoman, T.S., Džunuzović, J.V., Grgur, B.N., Gvozdenović, M.M., Jugović, B.Z., Miličević, D.S. & Džunuzović, E.S. 2016, "Improvement of the epoxy coating properties by incorporation of polyaniline surface treated TiO2 nanoparticles previously modified with vitamin B6", Progress in Organic Coatings, vol. 99, pp. 346-355. (http://dx.doi.org/10.1016/j.porgcoat.2016.06.014)

Radonjic, A., Bala, K. & Vujicic, V. 2016, "Integer codes correcting double asymmetric errors", IET Communications, vol. 10, no. 14, pp. 1691-1696. (http://dx.doi.org/10.1049/iet-com.2016.0097)

Radonjic, A. & Vujicic, V. 2016, "Integer Codes Correcting Spotty Byte Asymmetric Errors", IEEE Communications Letters, vol. 20, no. 12, pp. 2338-2341. (https://doi.org/10.1109/LCOMM.2016.2598803)

Radovanovic, M., Jugovic, B., Gvozdenovic, M., Jokic, B., Grgur, B., Bugarski, B. & Kneževic-Jugovic, Z. 2016, "Immobilization of ?-amylase via adsorption on magnetic particles coated with polyaniline", Starch, vol. 68, no. 5-6, pp. 427-435. (https://doi.org/10.1002/star.201500161)

Rafailović, L.D., Gammer, C., Srajer, J., Trišović, T., Rahel, J., Karnthaler, H.P., 2016, "Surface enhanced Raman scattering of dendritic Ag nanostructures grown with anodic aluminium oxide", RSC Advances, vol. 6, pp. 33348–33352 (http://dx.doi.org/10.1039/C5RA26632G)

Rašković, B., Vatić, S., Anđelković, B., Blagojević, V., Polović, N., 2016, "Optimizing storage conditions to prevent cold denaturation of trypsin for sequencing and to prolong its shelf life", Biochemical Engineering Journal, vol. 105, Part A, 168–176, (http://dx.doi.org/10.1016/j.bej.2015.09.018)

Rašović, A., Blagojević, V., Baranac-Stojanović, M., Kleinpeter, E., Marković, R. & Minić, D.M. 2016, "Quantification of the push-pull effect in 2-alkylidene-4-oxothiazolidines by using NMR spectral data and barriers to rotation around the CC bond", New Journal of Chemistry, vol. 40, no. 7, pp. 6364-6373. (http://dx.doi.org/10.1039/C6NJ00901H)

Shcherba, I.D., Bekenov, L.V., Antonov, V.N., Noga, H., Uskokovic, D., Zhak, O. & Kovalska, M.V. 2016, "Electronic structure and X-ray spectroscopic properties of YbNi2P2", Journal of Electron Spectroscopy and Related Phenomena, vol. 212, pp. 5-10. (http://dx.doi.org/10.1016/j.elspec.2016.07.002)

Sovilj, P., Vujicic, B., Radonjic, A., Pejic, D. & Vujicic, V. 2016, "Stochastic measurement of reactive power using a two-bit A/D converter", 21st IMEKO TC-4 International Symposium on Understanding the World through Electrical and Electronic Measurement, and 19th International Workshop on ADC Modelling and Testing, pp. 176.

Stanković, A., Sezen, M., Milenković, M., Kaišarević, S., Andrić, N., Stevanović, M., 2016. PLGA/Nano-ZnO Composite Particles for Use in Biomedical Applications: Preparation, Characterization, and Antimicrobial Activity, Journal of Nanomaterials 2016, Article ID 9425289. (https://doi.org/10.1155/2016/9425289)

Stojanović, Z. S., Ignjatović, N., Wu, V., Žunič, V., Veselinović, L., Škapin, S., Miljković, M., Uskoković, V., Uskoković, D., 2016, "Hydrothermally processed 1D hydroxyapatite: Mechanism of formation and biocompatibility studies", Materials Science and Engineering: C, vol. 68, pp. 746–757 (http://dx.doi.org/10.1016/j.msec.2016.06.047)

Šekuljica, N.Ž., Gvozdenović, M.M., Knežević-Jugović, Z.D., Jugović, B.Z., Grgur, B.N., 2016, "Biofuel cell based on horseradish peroxidase immobilized on copper sulfide as anode for decolorization of anthraquinone AV109 dye", Journal of Energy Chemistry, vol. 25, no. 3, pp. 403–408 (http://dx.doi.org/10.1016/j.jechem.2016.03.011)

Taleb, K., Markovski, J., Veličković, Z., Rusmirović, J., Rančić, M., Pavlović, V. & Marinković, A. 2016, "Arsenic removal by magnetite-loaded amino modified nano/microcellulose adsorbents: Effect of functionalization and media size", Arabian Journal of Chemistry, https://doi.org/10.1016/j.arabjc.2016.08.006.

Terzić, A., Mitić, V., Kocić, L., Radojević, Z., Pašalić, S., 2016, "Novel Application Of Fractal Analysis In Refractory Composite Microsturctural Characterization", in: Singh, D. (Ed.), Mechanical Properties and Performance of Engineering Ceramics and Composites X. John Wiley & Sons, Inc., pp. 73–85 (http://dx.doi.org/10.1002/9781119211310.ch9)

Tomić, Z.P., Kalucrossed D Signerović, L., Nikolić, N., Marković, S. & Makreski, P. 2016, "Thermal investigation of acetochlor adsorption on inorganic- and organic-modified montmorillonite", Journal of Thermal Analysis and Calorimetry, vol. 123, no. 3, pp. 2313-2319 (http://dx.doi.org/10.1007/s10973-015-5102-2).

Topličić-Ćurčić, G., Ristić, N., Grdić, Z., Mitić, V.V. & Grdić, D. 2016, "Impact of crushed mineral aggregate on the pumpability of concrete during transport and placement", Science of Sintering, vol. 48, no. 1, pp. 87-99. (https://doi.org/10.2298/SOS1601087T)

Trišović, T.L., Spasojević, M.D., Gvozdenović, M.M., Jugović, B.Z. & Rafailović, L.D. 2016, "Automatski uredjaji za elektohemijsku dezinfekciju vode sa pothlađivanjem elektolita" (Automatic devices for electrochemical water treatment with cooling of electrolyte), Hemijska Industrija, vol. 70, no. 2, pp. 201-207. (http://dx.doi.org/10.2298/HEMIND140822026T)

Vasić, M.M., Roupcová, P., Pizúrová, N., Stevanović, S., Blagojević, V.A., Žák, T. & Minić, D.M. 2016, "Thermally Induced Structural Transformations of Fe40Ni40P14B6 Amorphous Alloy", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 47, no. 1, pp. 260-267 (http://dx.doi.org/10.1007/s11661-015-3226-4).

Veselinovic, L., Mitric, M., Avdeev, M., Markovic, S. & Uskokovic, D. 2016, "New insights into BaTi1-xSnxO3 (0 ? x ? 0.20) phase diagram from neutron diffraction data", Journal of Applied Crystallography, vol. 49, no. 5, pp. 1726-1733. (https://doi.org/10.1107/S1600576716013157)

Zdravković, J.D., Poleti, D., Rogan, J., Begović, N.N., Blagojević, V.A., Vasić, M.M. & Minić, D.M. 2016, "Thermal stability and degradation of binuclear hexaaqua-bis(ethylenediamine)-(µ 2-pyromellitato)dinickel(II) tetrahydrate", Journal of Thermal Analysis and Calorimetry, vol. 123, no. 2, pp. 1715-1726 (http://dx.doi.org/10.1007/s10973-015-5007-0)

2015

Đorđević, A., Ignjatović, N., Seke, M., Jović, D., Uskoković, D., Rakočević, Z. 2015, "Synthesis and Characterization of Hydroxyapatite/Fullerenol Nanocomposites", Journal of Nanoscience and Nanotechnology, vol. 15, no. 2, pp. 1538-1542 (http://dx.doi.org/10.1166/jnn.2015.8671).

Đukić, A.B., Kumrić, K.R., Vukelić, N.S., Stojanović, Z.S., Stojmenović, M.D., Milošević, S.S., Matović, L.L., 2015, "Influence of ageing of milled clay and its composite with TiO2 on the heavy metal adsorption characteristics", Ceramics International, vol. 41, pp. 5129–5137 (http://dx.doi.org/10.1016/j.ceramint.2014.12.085).

Elezovic, N.R., Radmilovic, V.R., Kovac, J., Babic, B.M., Gaijic-Krstajic, Lj.M. & Krstajic, N.V. 2015, "Pt nanoparticles on tin oxide based support as a beneficial catalyst for oxygen reduction in alkaline solutions", RSC Advances, vol. 5, no. 21, pp. 15923-15929 (http://dx.doi.org/10.1039/C4RA13391A).

Grgur, B. N., Elkais, A. R., Gvozdenović, M. M., Drmanić, S. Ž., Trišović, T. L., Jugović, B. Z., 2015, "Corrosion of mild steel with composite polyaniline coatings using different formulations", Progress in Organic Coatings, vol. 79, pp. 17–24 (http://dx.doi.org/10.1016/j.porgcoat.2014.10.013)

Ignjatovic, N., Ajdukovic, Z., Rajkovic, J., Najman, S., Mihailovic, D., Uskokovic, D. 2015, "Enhanced Osteogenesis of Nanosized Cobalt-substituted Hydroxyapatite", Journal of Bionic Engineering, vol.12, no. 4, pp. 604–612 (http://dx.doi.org/10.1016/S1672-6529(14)60150-5).

Jakovetić, S., Luković, N., Jugović, B., Gvozdenović, M., Grbavčić, S., Jovanović, J. & Knežević-Jugović, Z. 2015, "Production of Antioxidant Egg White Hydrolysates in a Continuous Stirred Tank Enzyme Reactor Coupled with Membrane Separation Unit", Food and Bioprocess Technology, vol. 8, no. 2, pp. 287-300 (http://dx.doi.org/10.1007/s11947-014-1402-y).

Janačković, M., Gvozdenović, M., Jugović, B., Grgur, B., 2015, "The improved photooxidation stability of the SILAR deposited copper sulfide on polypyrrole, " Synthetic Metals, vol. 203, pp. 37–43 (http://dx.doi.org/10.1016/j.synthmet.2015.02.011).

Jokic, I., Djuric, Z., Radulovic, K., Frantlovic, M., 2015, "Fluctuations of the number of adsorbed micro/nanoparticles in sensors for measurement of particle concentration in air and liquid environments", Chemical Industry and Chemical Engineering Quarterly, vol. 21, no. 1-2, pp. 141-147 (http://dx.doi.org/10.2298/CICEQ140219011J).

Jokić, I., Frantlović, M., Djurić, Z., Radulović, K., Jokić, Z., 2015, "Adsorption–desorption noise in microfluidic biosensors operating in multianalyte environments", Microelectronic Engineering, vol. 144, pp. 32-36 (http://dx.doi.org/10.1016/j.mee.2015.02.032).

Jovanović, D.J., Dugandžić, I.M., Ćirić-Marjanović, G., Radetić, T., Ahrenkiel, S.P., Milošević, O.B., Nedeljković, J.M., Šaponjić, Z.V. & Mancic, L.T. 2015, "Spherical assemblies of titania nanotubes generated through aerosol processing", Ceramics International, vol. 41, no. 10, pp. 14754–14759 (http://dx.doi.org/10.1016/j.ceramint.2015.07.205)

Jović, B.M., Jović, V.D., Lačnjevac, U.Č., Gajić-Krstajić, L. & Krstajić, N.V. 2015, "Ni-(Ebonex-supported Ir) composite coatings as electrocatalysts for alkaline water electrolysis. Part I: Hydrogen evolution", International Journal of Hydrogen Energy, vol. 40, no. 33, pp. 10480-10490 (http://dx.doi.org/10.1016/j.ijhydene.2015.06.127).

Kalezic-Glisović, A., Mitrović, N., Obradović, N., 2015, "The thermal and magnetic properties of the Fe89.8Ni1.5Si5.2B3C0.5 and Fe81B13Si14C2 amorphous alloys", Science of Sintering, vol. 47, no. 3, pp. 259–268. (http://dx.doi.org/10.2298/SOS1503259K)

Karan, B. 2015, "Calibration of kinect-type RGB-D sensors for robotic applications", FME Transactions, vol. 43, no. 1, pp. 47-54 (doi:10.5937/fmet1501047K).

Kesić, Ž., Lukić, I., Zdujić, M., Jovalekić, Č., Liu, H. & Skala, D. 2015, "Mechanochemical synthesis of CaO·ZnO·K2CO3 catalyst: Characterization and activity for methanolysis of sunflower oil", Chemical Industry and Chemical Engineering Quarterly, vol. 21, no. 1, pp. 1-12 (http://dx.doi.org/10.2298/CICEQ131026041K).

Kostic, I., Ilic, V., Bukara, K., Mojsilovic, S., Djuric, Z., Draskovic, P., Bugarski, B., 2015, "Flow cytometric determination of osmotic behaviour of animal erythrocytes toward their engineering for drug delivery", Hemijska industrija, vol. 21–21. http://dx.doi.org/10.2298/HEMIND140124021K.

Kuzmanović, M., Jugović, D., Mitrić, M., Jokić, B., Cvjetićanin, N., Uskoković, D., 2015, "The use of various dicarboxylic acids as a carbon source for the preparation of LiFePO4/C composite", Ceramics International, vol. 41, no. 5, pp. 6753-6758 (http://dx.doi.org/10.1016/j.ceramint.2015.01.121).

Labus, N., Mentus, S., Rakic, S., Djuric, Z.Z., Vujancevic, J., Nikolic, M.V. 2015, "Reheating of zinc-titanate sintered specimens", Science of Sintering, vol. 47, no. 1, pp. 71–81 (http://dx.doi.org/10.2298/SOS1501071L).

Lukić, M.J., Jovalekić, Č., Marković, S. & Uskoković, D. 2015, "Enhanced high-temperature electrical response of hydroxyapatite upon grain size refinement", Materials Research Bulletin, vol. 61, pp. 534-538 (http://dx.doi.org/10.1016/j.materresbull.2014.10.072).

Mancic, L. Dugandzic, I.M., Milosevic, O. B. Jovanovic, D., Saponjic, Z., Rabanal, M. E., Gómez Villalba, L. S., 2015, "Aerosol-assisted processing of hierarchically organised TiO2 nanoparticles", International Journal of Materials and Product Technology, vol. 50, no. 3-4, pp. 221-229.

Mancic, L., Osman, R.F.M., Costa, A.M.L.M., d’ Almeida, J.R.M., Marinkovic, B.A., Rizzo, F.C. 2015, "Thermal and mechanical properties of polyamide 11 based composites reinforced with surface modified titanate nanotubes", Materials & Design, vol. 83, pp. 459–467 (http://dx.doi.org/10.1016/j.matdes.2015.06.059)

Marinkovic, B.A., Pontón, P.I., Resende, J.M., Letichevsky, S., Habran, M., Viol, J.B., Pandoli, O., Mancic, L. 2015, "Lepidocrocite-like ferrititanate nanosheets and their full exfoliation with quaternary ammonium compounds", Materials & Design, 85, pp. 197-204 (http://dx.doi.org/10.1016/j.matdes.2015.06.171).

Marković, S., Lukić, M.J., Škapin, S.D., Stojanović, B., Uskoković, D., 2015, "Designing, fabrication and characterization of nanostructured functionally graded HAp/BCP ceramics", Ceramics International, vol. 41, no. 2, Part B, pp. 2654–2667 http://dx.doi.org/10.1016/j.ceramint.2014.10.079.

Marković, S., Stanković, A., Lopičić, Z., Lazarević, S., Stojanović, M., Uskoković, D. 2015, "Application of raw peach shell particles for removal of methylene blue", Journal of Environmental Chemical Engineering, vol. 3, no. 2, pp. 716-724 (http://dx.doi.org/10.1016/j.jece.2015.04.002).

Mitić, V.V., Kocić, L., Paunović, V., Bastić, F. & Sirmić, D. 2015, "The fractal nature materials microstructure influence on electrochemical energy sources", Science of Sintering, vol. 47, no. 2, pp. 195-204 (http://dx.doi.org/10.2298/SOS1502195M).

Mitic, V.V., Paunović, V. & Kocić, L. 2015, "Dielectric properties of BaTiO3 ceramics and curie-weiss and modified curie-weiss affected by fractal morphology", Ceramic Engineering and Science Proceedings, vol. 35, no. 6, pp. 123-133 (http://dx.doi.org/10.1002/9781119040354.ch14).

Mitic, V.V., Paunovic, V. & Kocic, L. 2015, "Fractal approach to BaTiO3-ceramics micro-impedances", Ceramics International, vol. 41, no. 5, pp. 6566-6574 (http://dx.doi.org/10.1016/j.ceramint.2015.01.102).

Nenadović, S.S., Kljajević, L.M., Nenadović, M.T., Mirković, M.M., Marković, S.B. & Rakočević, Z.L. 2015, "Mechanochemical treatment and structural properties of lead adsorption on kaolinite (Rudovci, Serbia)", Environmental Earth Sciences, vol. 73, no. 11, pp. 7669-7677 (http://dx.doi.org/10.1007/s12665-014-3941-y).

Nenadovic, S., Kljajevic, L., Markovic, S., Omerasevic, M., Jovanovic, U., Andric, V., Vukanac, I., 2015, "Natural diatomite (Rudovci, Serbia) as adsorbent for removal Cs from radioactive waste liquids", Science of Sintering, vol. 47, no. 3, pp. 299–309. ( http://dx.doi.org/10.2298/SOS1503299N)

Nikolic P.M., Paraskevopoulos K.M., Zorba T.T., Vasiljevic Z.Z., Pavlidou E., Vujatovic S.S., Blagojevic V., Aleksic O.S., Bojicic A.I. & Nikolic M.V. 2015, "Lead telluride doped with au as a very promising material for thermoelectric applications", Advances in Materials Science and Engineering, vol. 2015, Article ID 283782 (http://dx.doi.org/10.1155/2015/283782)

Obradović, N., Đorđevic, N., Peleš, A., Filipović, S., Mitrić, M., Pavlović, V.B. 2015, "The influence of compaction pressure on the density and electrical properties of cordierite-based ceramics", Science of Sintering, vol. 47, no. 1, pp. 15–22 (http://dx.doi.org/10.2298/SOS1501015O).

Peleš, A., Pavlović, V.P., Filipović, S., Obradović, N., Mančić, L., Krstić, J., Mitrić, M., Vlahović, B., Rašić, G., Kosanović, D., Pavlović, V.B. 2015, "Structural Investigation of Mechanically Activated ZnO powder", Journal of Alloys and Compounds, vol. 648, pp. 971-979 (http://dx.doi.org/10.1016/j.jallcom.2015.06.247).

Rafailović, L.D., Gammer, C., Rentenberger, C., Trišović, T., Kleber, C., Karnthaler, H.P., 2015, "Functionalizing Aluminum Oxide by Ag Dendrite Deposition at the Anode during Simultaneous Electrochemical Oxidation of Al", Advanced Materials, vol. 27, no. 41, pp. 6438-6443 (http://dx.doi.org/10.1002/adma.201502451)

Ristanović, Z., Kalezić-Glišović, A., Mitrović, N., Đukić, S., Kosanović, D., Maričić, A. 2015, "The influence of mechanochemical activation and thermal treatment on magnetic properties of the BaTiO3-FexOy powder mixture", Science of Sintering, vol. 47, no. 1, pp. 3–14 (http://dx.doi.org/10.2298/SOS141121001R)

Rodić, A., Jovanović, M., Stevanović, I., Karan, B., Potkonjak, V. 2015, "Building Technology Platform Aimed to Develop Service Robot with Embedded Personality and Enhanced Communication with Social Environment", Digital Communications and Networks, vol. 1, no. 2, pp. 112–124 (http://dx.doi.org/10.1016/j.dcan.2015.03.002)

Stevanović, M., Biočanin, V., Nedić, M., Ignjatović, N. 2015, "Efficacy of nanocrystalline bone substitute biphasic calcium phosphate/poly-DL-lactide-co-glycolide for periodontal intrabony defects filling", Vojnosanitetski pregled, vol. 72, no. 8, pp. 689-695 (http://dx.doi.org/10.2298/VSP140528049S).

Stevanović, M., Filipović, N., Djurdjević, J., Lukić, M., Milenković, M. & Boccaccini, A. 2015, "45S5Bioglass®-based scaffolds coated with selenium nanoparticles or with poly(lactide-co-glycolide)/selenium particles: Processing, evaluation and antibacterial activity", Colloids and Surfaces B: Biointerfaces, vol. 132, pp. 208-215 ( http://dx.doi.org/10.1016/j.colsurfb.2015.05.024)

Terzić, A., Obradović, N., Andrić, L., Stojanović, J. & Pavlović, V. 2015, "Investigation of thermally induced processes in corundum refractory concretes with addition of fly ash", Journal of Thermal Analysis and Calorimetry, vol. 119, no. 2, pp. 1339-1352 (http://dx.doi.org/10.1007/s10973-014-4230-4).

Terzić, A., Pavlović, L., Radojević, Z., Pavlović, V. & Mitić, V. 2015, "Novel utilization of fly ash for high-temperature mortars: Phase composition, microstructure and performances correlation", International Journal of Applied Ceramic Technology, vol. 12, no. 1, pp. 133-146 (http://dx.doi.org/10.1111/ijac.12135).

Terzić, A., Pezo, L., Mitić, V., Radojević, Z., 2015, "Artificial fly ash based aggregates properties influence on lightweight concrete performances", Ceramics International, vol. 41, no. 2, Part B, pp. 2714–2726 (http://dx.doi.org/10.1016/j.ceramint.2014.10.086).

Terzić, A., Pezo, L., Andrić, L., Mitić, V.V. 2015, "Analytical modeling of activation procedure applied in alpha-alumina thermo-mechanical synthesis", Ceramics International, vol. 41, no. 9 PART B, pp. 11908–11917 (http://dx.doi.org/10.1016/j.ceramint.2015.05.158).

Terzic, A., Mitic, V.V., Kocic, L., Radojevic, Z., Pasalic, S., 2015, "Mechanical properties and microstructure fractal analysis of refractory bauxite concrete", Science of Sintering, vol. 47, no. 3, pp. 331–346. (http://dx.doi.org/10.2298/SOS1503331T)

Vasić, M.M., Blagojević, V.A., Begović, N.N., Žák, T., Pavlović, V.B., Minić, D.M. 2015, "Thermally induced crystallization of amorphous Fe40Ni40P14B6 alloy", Thermochimica Acta, vol. 614, pp. 129–136 (http://dx.doi.org/10.1016/j.tca.2015.06.015)

Vasiljevic, Z.Z., Lukovic, M.D., Nikolic, M.V., Tasic, N.B., Mitric, M., Aleksic, O.S., 2015, "Nanostructured Fe2O3/TiO2 thick films: Analysis of structural and electronic properties", Ceramics International, vol. 41, no. 5, pp. 6889-6897 (http://dx.doi.org/10.1016/j.ceramint.2015.01.141).

2014

Arsenović, M., Stanković, S., Pezo, L., Radojević, Z., Mančić, L. 2014, "Thermal and mineralogical characterization of loess heavy clays for potential use in brick industry", Thermochimica acta, vol. 580, pp. 38-45 (http://dx.doi.org/10.1016/j.tca.2014.01.026).

Dautović, J. Trifković, D., Nikolić, Z. 2014, "Advanced features of the reconstructed special purpose river ship "Kozara" with a Diesel electric drive (DED)", Shipbuilding,  Vol. 65, No. 4, pp. 65-80.

Đorđević, N., Obradović, N., Kosanović, D., Mitrić, M. & Pavlović, V.P. 2014, "Sintering of cordierite in the presence of MoO3 and crystallization analysis", Science of Sintering, vol. 46, no. 3, pp. 307-313 (http://dx.doi.org/10.2298/SOS1403307D)

Đordević, S.V., Foster, G.M., Stojilović, N., Evans, E.A., Chen, Z.G., Li, Z.Q., Nikolić, M.V., Đuric, Z.Z., Vujatović, S.S. & Nikolić, P.M. 2014, "Magneto-optical effects in 1-xAsx with x=0.01: Comparison with topological insulator Bi1-xSbx with x=0.20", Physica Status Solidi (B) Basic Research, vol. 251, no. 8, pp. 1510-1514 (http://dx.doi.org/10.1002/pssb.201451091).

Djurić, Z., Jokić, I., Peleš, A., 2014, "Fluctuations of the number of adsorbed molecules due to adsorption–desorption processes coupled with mass transfer and surface diffusion in bio/chemical MEMS sensors", Microelectronic Engineering, vol. 124, pp. 81–85 (http://dx.doi.org/10.1016/j.mee.2014.06.001).

Djuric, Z.G., Jokic, I.M. & Peles, A. 2014, "Highly sensitive graphene-based chemical and biological sensors with selectivity achievable through low-frequency noise measurement-Theoretical considerations", Proceedings of the International Conference on Microelectronics, ICM (2014 29th International Conference on Microelectronics, MIEL 2014), IEEE, pp. 153-156 (http://dx.doi.org/10.1109/MIEL.2014.6842108).

Djurić, Z., Jokić, I., Radulović, K., 2014, "Resonant Frequency and Phase Noise of Nanoelectromechanical Oscillators Based on Two-dimensional Crystal Resonators", Procedia Engineering, EUROSENSORS 2014, the 28th European Conference on Solid-State Transducers, vol. 87, pp. 460–463 (http://dx.doi.org/10.1016/j.proeng.2014.11.382)

Djuric, Z.Z., Aleksic, O.S., Nikolic, M.V., Labus, N., Radovanovic, M., Lukovic, M.D. 2014, "Structural and electrical properties of sintered Fe2O3/TiO2 nanopowder mixtures", Ceramics International, vol. 40, no. 9, pp. 15131–15141 (http://dx.doi.org/10.1016/j.ceramint.2014.06.126).

Filipović, N., Stevanović, M., Nunić, J., Cundrič, S., Filipič, M., Uskoković, D. 2014, "Synthesis of poly(epsilon-caprolactone) nanospheres in the presence of the protective agent poly(glutamic acid) and their cytotoxicity, genotoxicity and ability to induce oxidative stress in HepG2 cells", Colloids and Surfaces B: Biointerfaces, vol. 117, pp. 414–424 (http://dx.doi.org/10.1016/j.colsurfb.2014.03.015).

Filipović, S., Obradović, N., Pavlović, V.B., Kosanović, D., Mitrić, M., Mitrović, N., Pouchly, V., Kachlik, M. & Maca, K. 2014, "Advantages of combined sintering compared to conventional sintering of mechanically activated magnesium titanate", Science of Sintering, vol. 46, no. 3, pp. 283-290 (http://dx.doi.org/10.2298/SOS1403283F).

Flores, G., Carrillo, J., Luna, J.A., Martínez, R., Sierra-Fernandez, A., Milosevic, O., Rabanal, M.E. 2014, "Synthesis, characterization and photocatalytic properties of nanostructured ZnO particles obtained by low temperature air-assisted-USP", Advanced Powder Technology, vol. 25, no. 5, pp. 1435-1441 (http://dx.doi.org/10.1016/j.apt.2014.02.004).

Flores-Carrasco, G., Alcántara-Iniesta, S., Sierra-Fernández, A., Gomez-Villalba, L.S., Rabanal, M.E. & Milosevic, O. 2014, "Structural, optical and electrical properties of SnO2 and SnO2:F films deposited by ultrasonic spray pyrolysis", Superficies y Vacio, vol. 27, no. 4, pp. 126-132.

Ignjatović, N. L., Ninkov, P., Sabetrasekh, R., Lyngstadaas, S. P., Uskoković, D.P. 2014, "In vitro evaluation of a multifunctional nano drug delivery system based on tigecycline-loaded calcium-phosphate/poly-DL-lactide-co-glycolide", Bio-Medical Materials and Engineering, vol. 24, pp. 1647–1658 (http://dx.doi.org/10.3233/BME-140978)

Ignjatović, N., Vranješ Djurić, S., Mitić, Ž., Janković, D., Uskoković, D. 2014, "Investigating an organ-targeting platform based on hydroxyapatite nanoparticles using a novel in situ method of radioactive 125Iodine labeling", Materials Science and Engineering: C, vol. 43, pp. 439 - 446 (http://dx.doi.org/10.1016/j.msec.2014.07.046).

Jokic, I., Frantlovic, M. & Djuric, Z. 2014, "RF MEMS and NEMS components and adsorption-desorption induced phase noise", in Proceedings of the International Conference on Microelectronics, ICM (2014 29th International Conference on Microelectronics, MIEL 2014), IEEE, pp. 117-124 (http://dx.doi.org/10.1109/MIEL.2014.6842100).

Jugović, D., Milović, M., Ivanovski, V.N., Avdeev, M., Dominko, R., Jokić, B., Uskoković, D. 2014, "Structural study of monoclinic Li2FeSiO4 by X-ray diffraction and Mössbauer spectroscopy", Journal of Power Sources, vol. 265, pp. 75-80 (http://dx.doi.org/10.1016/j.jpowsour.2014.04.121).

Karan, B., Golubović, Š., Gnjatović, M., 2014, "Markerless Vision-Based Skeleton Tracking in Therapy of Gross Motor Skill Disorders in Children", in: Rodić, A., Pisla, D., Bleuler, H. (Eds.), New Trends in Medical and Service Robots, Mechanisms and Machine Science, Springer International Publishing, pp. 79–93. (Mechanisms and Machine Science Vol. 20) http://dx.doi.org/10.1007/978-3-319-05431-5_6

Kosanović, D., Živojinović, J., Obradović, N., Pavlović, V.P., Pavlović, V.B., Peleš, A. & Ristić, M.M. 2014, "The influence of mechanical activation on the electrical properties of Ba0.77Sr0.23TiO3 ceramics", Ceramics International, vol. 40, no. 8 PART A, pp. 11883-11888 (http://dx.doi.org/10.1016/j.ceramint.2014.04.023).

Labus, N., Mentus, S., Đurić, Z.Z. & Nikolić, M.V. 2014, "Influence of nitrogen and air atmosphere during thermal treatment on micro and nano sized powders and sintered TiO2 specimens", Science of Sintering, vol. 46, no. 3, pp. 365-375 (http://dx.doi.org/10.2298/SOS1403365L).

Lević, S., Obradović, N., Pavlović, V., Isailović, B., Kostić, I., Mitrić, M., Bugarski, B. & Nedović, V. 2014, "Thermal, morphological, and mechanical properties of ethyl vanillin immobilized in polyvinyl alcohol by electrospinning process", Journal of Thermal Analysis and Calorimetry, vol. 118, no. 2, pp. 661-668 (http://dx.doi.org/10.1007/s10973-014-4060-4).

Lojpur, V., Mancic, L., Vulic, P., Dramicanin, M.D., Rabanal, M.E., Milosevic, O., 2014, "Structural, morphological and up-converting luminescence characteristics of nanocrystalline Y2O3:Yb/Er powders obtained via spray pyrolysis", Ceramics International, vol. 40. no. 2, pp. 3089–3095 (http://dx.doi.org/10.1016/j.ceramint.2013.10.002).

Lukić, I., Kesić, Ž., Maksimović, S., Zdujić, M., Krstić, J. & Skala, D. 2014, "Kinetics of heterogeneous methanolysis of sunflower oil with CaO·ZnO catalyst: Influence of different hydrodynamic conditions, Kinetika heterogene metanolize suncokretovog ulja sa CaO·ZnO kao katalizatorom: Uticaj različitih hidrodinamičkih uslova", Chemical Industry and Chemical Engineering Quarterly, vol. 20, no. 3, pp. 425-439 (http://dx.doi.org/10.2298/CICEQ130514025L)

Lukić, M. J., Veselinović, L., Stevanović, M., Nunić, J., Dražič, G., Marković, S., Uskoković, D. 2014, "Hydroxyapatite nanopowders prepared in the presence of zirconium ions", Materials Letters, vol. 122, pp. 296–300 (http://dx.doi.org/10.1016/j.matlet.2014.02.072).

Mancic, L., Lojpur, V., Marinkovic, B.A., de Pinho Mauricio, M.H., Dramicanin, M.D. & Milosevic, O. 2014, "Effect of processing parameters on structural, morphological and optical Y2O3:Yb3+/Ho3+ powders characteristics", Advanced Powder Technology, vol. 25, no. 5, pp. 1449-1454 (http://dx.doi.org/10.1016/j.apt.2014.03.015).

Mitić, V.V., Kocić, L.J., Paunović, V. & Pavlović, V. 2014, "Fractal corrections of BaTiO3-ceramic sintering parameters", Science of Sintering, vol. 46, no. 2, pp. 149-156. (http://dx.doi.org/10.2298/SOS1402149M)

Mitic, V.V., Paunovic, V. & Pavlovic, V. 2014, "Microstructure and dielectric properties of rare-earth doped BaTiO3 ceramics", Ferroelectrics, vol. 470, no. 1, pp. 159-167 (http://dx.doi.org/10.1080/00150193.2014.923229).

Mitić, Ž.J., Najman, S.J., Cakić, M.D., Ajduković, Z.R., Ignjatović, N.L., Nikolić, R.S., Nikolić, G.M., Stojanović, S.T., Vukelić, M.Đ., Trajanović, M.D., 2014, "Spectroscopic characterization of bone tissue of experimental animals after glucocorticoid treatment and recovery period", Journal of Molecular Structure, vol. 1074, pp. 315–320 (http://dx.doi.org/10.1016/j.molstruc.2014.06.006).

Mitrović, A., Zdujić, M., 2014, "Preparation of pozzolanic addition by mechanical treatment of kaolin clay",. International Journal of Mineral Processing, vol. 132, pp. 59-66 (http://dx.doi.org/10.1016/j.minpro.2014.09.004).

Mofokeng, T.G., Luyt, A.S., Pavlovic, V.P., Pavlovic, V.B., Dudic, D., Vlahovic, B. & Djokovic, V. 2014, "Ferroelectric nanocomposites of polyvinylidene fluoride/polymethyl methacrylate blend and BaTiO3 particles: Fabrication of b-crystal polymorph rich matrix through mechanical activation of the filler", Journal of Applied Physics, vol. 115, no. 8 (http://dx.doi.org/10.1063/1.4866694).

Nastasović, A.B., Ignjatović, N.L., Uskoković, D.P., Marković, D.D., Ekmeščić, B.M., Maksin, D.D. & Onjia, A.E. 2014, "Determination of thermodynamic interactions of poly(l-lactide) and biphasic calcium phosphate/poly(l-lactide) composite by inverse gas chromatography at infinite dilution", Journal of Materials Science, vol. 49, no. 14, pp. 5076-5086. (http://dx.doi.org/10.1007/s10853-014-8214-3)

Nenadovic, S.S., Kljajevic, L.M., Seslak, B.Z., Obradovic, N.N., Vukanac, I.S., Pavlovic, V.B. 2014, "Cesium Removal from Aqueous Solution by Natural Mineral Clinoptilolite", Nuclear Technology and Radiation Protection, vol. 29, no. 2, pp. 135–141 (http://dx.doi.org/10.2298/NTRP1402135N).

Paunovic, V., Mitic, V.V., Prijic, Z. & Zivkovic, L. 2014, "Microstructure and dielectric properties of Dy/Mn doped BaTiO3 ceramics", Ceramics International, vol. 40, no. 3, pp. 4277-4284 (http://dx.doi.org/10.1016/j.ceramint.2013.08.092).

Pavlovic, V.P., Nikolic, M.V., Pavlovic, V.B., Blanusa, J., Stevanovic, S., Mitic, V.V., Scepanovic, M. & Vlahovic, B. 2014, "Raman responses in mechanically activated BaTiO 3", Journal of the American Ceramic Society, vol. 97, no. 2, pp. 601-608 (http://dx.doi.org/10.1111/jace.12423).

Pontón, P. I., d’Almeida, J. R.M., Marinkovic, B. A., Savić, S. M., Mancic, L., Rey, N. A., Morgado, E., Rizzo, F. C. 2014, "The effects of the chemical composition of titanate nanotubes and solvent type on 3-aminopropyltriethoxysilane grafting efficiency", Applied Surface Science, vol. 301, pp. 315-322 (http://dx.doi.org/10.1016/j.apsusc.2014.02.071).

Rabanal, M.E., Barroso, I., Gómez-Villalba, L.S., Mancic, L., Milosevic, O. 2014, "Directed growth of nanoarchitected hybrid phosphor particles synthesized at low temperature", Advanced Powder Technology, vol. 25, no. 5, pp. 1442-1448 (http://dx.doi.org/10.1016/j.apt.2014.03.006).

Radulovic, K.T., Jokic, I.M., Frantlovic, M.P. & Djuric, Z.G. 2014, "Numerical simulation of transient response of chemical and biological micro/nanofabricated sensors operating in multianalyte environments", Proceedings of the International Conference on Microelectronics, ICM (2014 29th International Conference on Microelectronics, MIEL 2014), IEEE, pp. 187-190 (http://dx.doi.org/10.1109/MIEL.2014.6842117)

Ružić, J., Stašić, J., Marković, S., Raić, K. & Božić, D. 2014, "Synthesis and characterization of Cu-ZrB2 alloy produced by PM techniques", Science of Sintering, vol. 46, no. 2, pp. 217-224 (http://dx.doi.org/10.2298/SOS1402217R).

Savić, S.M., Tadić, M., Jagličić, Z., Vojisavljević, K., Mancic, L., Branković, G. 2014, "Structural, electrical and magnetic properties of nickel manganite obtained by a complex polymerization method", Ceramics International, vol. 40, no. 10, pp. 15515-15521 (http://dx.doi.org/10.1016/j.ceramint.2014.07.024).

Sierra-Fernandez, A., Gomez-Villalba, L.S., Milosevic, O., Fort, R. & Rabanal, M.E. 2014, "Synthesis and morpho-structural characterization of nanostructured magnesium hydroxide obtained by a hydrothermal method", Ceramics International, vol. 40, no. 8 PART A, pp. 12285-12292 (http://dx.doi.org/10.1016/j.ceramint.2014.04.073).

Soares, A.R., Pontón, P.I., Mancic, L., d'Almeida, J.R.M., Romao, C.P., White, M.A. & Marinkovic, B.A. 2014, "Al2Mo3O12/polyethylene composites with reduced coefficient of thermal expansion", Journal of Materials Science, vol. 49, no. 22, pp. 7870-7882 (http://dx.doi.org/10.1007/s10853-014-8498-3).

Stefanaki, E.C., Polymeris, G.S., Nikolic, P.M., Papageorgiou, C., Pavlidou, E., Hatzikraniotis, E., Kyratsi, T. & Paraskevopoulos, K.M. 2014, "Macro and Micro-Scale Features of Thermoelectric PbTe (Br, Na) Systems: Micro-FTIR Spectroscopy, Micro-Seebeck Measurements, and SEM/EDX Observations", Journal of Electronic Materials, vol. 43, no. 10, pp. 3785-3791 (http://dx.doi.org/10.1007/s11664-014-3163-9).

Stevanović, M., Bračko, I., Milenković, M., Filipović, N., Nunić, J., Filipič, M., Uskoković, D.P., 2013, "Multifunctional PLGA particles containing poly(L-glutamic acid)-capped silver nanoparticles and ascorbic acid with simultaneous antioxidative and prolonged antimicrobial activity", Acta Biomaterialia, vol. 10, no. 1, pp. 151–162 (http://dx.doi.org/10.1016/j.actbio.2013.08.030).

Stupar, P., Pavlović, V., Nunić, J., Cundrič, S., Filipič, M. & Stevanović, M. 2014, "Development of lyophilized spherical particles of poly(epsilon- caprolactone) and examination of their morphology, cytocompatibility and influence on the formation of reactive oxygen species", Journal of Drug Delivery Science and Technology, vol. 24, no. 2, pp. 191-197.

Terzić, A., Andrić, L., Mitić, V. 2014, "Assessment of intensive grinding effects on alumina as refractory compound: Acceleration of ? to ? phase transformation mechanism", Ceramics International, vol. 40, no. 9, Part B, Pages 14851–14863 (http://dx.doi.org/10.1016/j.ceramint.2014.06.080).

Terzić, A., Andrić, L. & Mitić, V. 2014, "Mechanically activated coal ash as refractory bauxite shotcrete microfiller: Thermal interactions mechanism investigation", Ceramics International, vol. 40, no. 8 PART A, pp. 12055-12065 (http://dx.doi.org/10.1016/j.ceramint.2014.04.045).

Terzić, A., Andrić, L., Stojanović, J., Obradović, N. & Kostović, M. 2014, "Mechanical activation as sintering pre-treatment of talc for steatite ceramics", Science of Sintering, vol. 46, no. 2, pp. 247-258. ( http://dx.doi.org/10.2298/SOS1402247T).

Veselinović, L., Mitrić, M., Mančić, L., Vukomanović, M., Hadžić, B., Marković, S. & Uskoković, D. 2014, "The effect of Sn for Ti substitution on the average and local crystal structure of BaTi1-xSnxO3 (0 ? x ? 0.20)", Journal of Applied Crystallography, vol. 47, no. 3, pp. 999-1007 (http://dx.doi.org/10.1107/S1600576714007584).

2013

Aleksic, O., Djuric, Z., Nikolic, M., Tasic, N., Vukovic, M., Marinkovic-Stanojevic, Z., Nikolic, N., Nikolic, P., 2013, "Nanostructured Fe2O3/TiO2 thick films prepared by screen printing", Processing and Application of Ceramics, vol. 7, no. 3, pp. 129–134. http://dx.doi.org/10.2298/PAC1303129A.

Aleksic, O.S., Nikolic, M.V., Lukovic, M.D., Nikolic, N., Radojcic, B.M., Radovanovic, M., Djuric, Z., Mitric, M., Nikolic, P.M., 2013, "Preparation and characterization of Cu and Zn modified nickel manganite NTC powders and thick film thermistors", Materials Science and Engineering: B, vol. 178, no. 3, pp. 202-210 (http://dx.doi.org/10.1016/j.mseb.2012.11.003).

Aleksic, O.S., Nikolic, M.V., Lukovic, M.D., Aleksic, S.O., Nikolic, P.M., 2013, "Analysis and optimization of a thermal sensor system for measuring water flow", Sensors and Actuators A: Physical, vol. 201, pp. 371–376 (http://dx.doi.org/10.1016/j.sna.2013.07.035).

Arsenović, M., Stanković, S., Pezo, L., Mančić, L., Radojević, Z., 2013, "Optimization of the production process through response surface method: Bricks made of loess", Ceramics International, vol. 39, no. 3, pp. 3065–3075 (http://dx.doi.org/10.1016/j.ceramint.2012.09.086).

Blagojević, V.A., Obradović, N., Cvjetićanin, N. & Minić, D.M. 2013, "Influence of dimensionality on phase transition in VO2 nanocrystals", Science of Sintering, vol. 45, no. 3, pp. 305-311 (doi:10.2298/SOS1303305B).

Bojić, N.V., Nikolić, R.R., Jugović, B.Z., Jugović, Z.S. & Gvozdenović, M.M. 2013, "Uniaxial tension of drying sieves", Hemijska Industrija, vol. 67, no. 4, pp. 655-662 (http://dx.doi.org/10.2298/HEMIND120824109B).

Cekić, B., Ćirić, K., Iordoc, M., Marković, S., Mitrić, M. & Stojić, D. 2013, "Kinetics of hydrogen absorption in Zr-based alloys", Journal of Alloys and Compounds, vol. 559, pp. 162-166. (http://dx.doi.org/10.1016/j.jallcom.2013.01.104)

Choi, J., Park, S., Stojanović, Z., Han, H.-S., Lee, J., Seok, H.K., Uskoković, D., Lee, K.H. 2013, "Facile Solvothermal Preparation of Monodisperse Gold Nanoparticles and Their Engineered Assembly of Ferritin–Gold Nanoclusters", Langmuir, vol. 29, pp. 15698–15703 (http://dx.doi.org/10.1021/la403888f).

Dugandžić, I.M., Jovanović, D.J., Mančić, L.T., Milošević, O.B., Ahrenkiel, S.P., Šaponjić, Z.V., Nedeljković, J.M., 2013, "Ultrasonic spray pyrolysis of surface modified TiO2 nanoparticles with dopamine", Materials Chemistry and Physics, vol. 143, no. 1, pp. 233–239 (http://dx.doi.org/10.1016/j.matchemphys.2013.08.058).

Dugandzic, I., Lojpur, V., Mancic, L., Dramicanin, M.D., Rabanal, M.E., Hashishin, T., Tan, Z., Ohara, S., Milosevic, O., 2013, "Aerosol route as a feasible bottom-up chemical approach for up-converting phosphor particles processing", Advanced Powder Technology, vol. 24, no. 5 , pp. 852–857 (http://dx.doi.org/10.1016/j.apt.2013.02.011).

Elkais, A.R., Gvozdenović, M.M., Jugović, B.Z., Grgur, B.N. 2013, "The influence of thin benzoate-doped polyaniline coatings on corrosion protection of mild steel in different environments", Progress in Organic Coatings, vol. 76, no. 4, pp. 670–676 (http://dx.doi.org/10.1016/j.porgcoat.2012.12.008).

Filipović, N., Stevanović, M., Radulović, A., Pavlović, V., Uskoković, D. 2013, "Facile synthesis of poly(epsilon-caprolactone) micro and nanospheres using different types of polyelectrolytes as stabilizers under ambient and elevated temperature", Composites Part B: Engineering, vol. 45. no. 1, pp. 1471–1479 (http://dx.doi.org/10.1016/j.compositesb.2012.07.008)

Filipović, S., Obradović, N., Krstić, J., Šćepanović, M., Pavlović, V., Paunović, V., Ristić, M.M., 2013, "Structural characterization and electrical properties of sintered magnesium–titanate ceramics", Journal of Alloys and Compounds, vol. 555, 39–44 (http://dx.doi.org/10.1016/j.jallcom.2012.12.040).

Filipovic, S., Obradovic, N., Kosanovic, D., Pavlovic, V. & Djordjevic, A. 2013, "Sintering of the mechanically activated MgO-TiO2 system", Journal of Ceramic Processing Research, vol. 14, no. 1, pp. 31-34.

Frantlović, M., Jokić, I., Djurić, Z., Radulović, K., 2013, "Analysis of the competitive adsorption and mass transfer influence on equilibrium mass fluctuations in affinity-based biosensors", Sensors and Actuators B: Chemical, vol. 189, pp. 71–79, http://dx.doi.org/10.1016/j.snb.2012.12.080.

Gomez-Villalba, L.S., Sourty, E., Freitag, B., Milosevic, O., Rabanal, M.E., 2013, "Tem–stem study of europium doped gadolinium oxide nanoparticles synthesized by spray pyrolysis", Advanced Powder Technology, vol. 24, no. 5, pp. 24, 864–870 (http://dx.doi.org/10.1016/j.apt.2013.03.011).

Grbović Novaković, J., Kurko, S., RašKović-Lovre, Ž., MilošEvić, S., Milanović, I., Stojanović, Z., Vujasin, R., Matović, L., 2013, "Changes in Storage Properties of Hydrides Induced by Ion Irradiation", Materials Science-MEDZIAGOTYRA, vol. 19, no. 2, pp. 134–139. (http://dx.doi.org/10.5755/j01.ms.19.2.1579)

Ignjatović, N., Ajduković, Z., Savić, V., Najman, S., Mihailović, D., Vasiljević, P., Stojanović, Z., Uskoković, V., Uskoković, D., 2013, "Nanoparticles of cobalt-substituted hydroxyapatite in regeneration of mandibular osteoporotic bones", Journal of Materials Science: Materials in Medicine, vol. 24, no. 2, pp. 343-354 (DOI: 10.1007/s10856-012-4793-1).

Ignjatović, N., Uskoković, V., Ajduković, Z., Uskoković, D., 2013, "Multifunctional hydroxyapatite and poly(D,L-lactide-co-glycolide) nanoparticles for the local delivery of cholecalciferol", Materials Science and Engineering: C, vol. 33, no. 2, pp. 943-950 (http://dx.doi.org/10.1016/j.msec.2012.11.026).

Jakovetić, S.M., Jugović, B.Z., Gvozdenović, M.M., Bezbradica, D.I., Antov, M.G., Mijin, D.Z. & Knežević-Jugović, Z.D. 2013, "Synthesis of Aliphatic Esters of Cinnamic Acid as Potential Lipophilic Antioxidants Catalyzed by Lipase B from Candida antarctica", Applied Biochemistry and Biotechnology, vol. 170, no. 7, pp. 1560 - 1573 (DOI: 10.1007/s12010-013-0294-z).

Jovic, V., Lacnjevac, U., Jovic, B., Gajic-Krstajic, L., Krstajic, N., 2013, "Ni-MoO2 composite cathodes for hydrogen evolution in alkaline solution: Effect of aging of the electrolyte for their electrodeposition", Journal of the Serbian Chemical Society vol. 78, pp. 689–700. (http://dx.doi.org/10.2298/JSC120831112J)

Jugović, D., Mitrić, M., Milović, M., Jokić, B., Vukomanović, M., Suvorov, D., Uskoković, D., 2013, "Properties of quenched LiFePO4/C powder obtained via cellulose matrix-assisted method", Powder Technology, vol. 246, pp. 539-544 (http://dx.doi.org/10.1016/j.powtec.2013.06.021).

Kumrić, K.R., Đukić, A. B., Trtić-Petrović, T. M., Vukelić, N. S., Stojanović, Z., Grbović Novaković, J. D. & Matović, L. L. 2013, "Simultaneous removal of divalent heavy metals from aqueous solutions using raw and mechanochemically treated interstratified montmorillonite/kaolinite clay", Industrial and Engineering Chemistry Research, vol. 52, no. 23, pp. 7930-7939. (http://dx.doi.org/10.1021/ie400257k)

Karan, B., 2013, "Accuracy improvements of consumer-grade 3D sensors for robotic applications", in: 2013 IEEE 11th International Symposium on Intelligent Systems and Informatics (SISY). Presented at the 2013 IEEE 11th International Symposium on Intelligent Systems and Informatics (SISY), pp. 141–146 (DOI:10.1109/SISY.2013.6662558).

Labus, N., Krstić, J., Marković, S., Vasiljević-Radović, D., Nikolić, M.V. & Pavlović, V. 2013, "ZnTiO3 ceramic nanopowder microstructure changes during compaction", Science of Sintering, vol. 45, no. 2, pp. 209-221.(http://dx.doi.org/10.2298/SOS1302209L)

Lačnjevac, U.Č., Jović, B.M., Gajić-Krstajić, L.M., Kovač, J., Jović, V.D., Krstajić, N.V., 2013, "Ti Substrate Coated with Composite Cr-MoO2 Coatings as Highly Selective Cathode Materials in Hypochlorite Production", Electrochimica Acta, vol. 96, pp. 34-42 (http://dx.doi.org/10.1016/j.electacta.2013.02.086).

Lojpur, V., Mancic, L., Rabanal, M.E., Dramicanin, M.D., Tan, Z. Hashishin, T., Ohara, S., Milosevic, O. 2013, "Structural, morphological and luminescence properties of nanocrystalline up-converting Y1.89Yb0.1Er0.01O3 phosphor particles synthesized through aerosol route", Journal of Alloys and Compounds, vol. 580, pp. 584–591 (http://dx.doi.org/10.1016/j.jallcom.2013.07.125).

Lojpur, V., Nikolic, M., Mancic, L., Milosevic, O. & Dramicanin, M.D. 2013, “Y2O3:Yb,Tm and Y2O3:Yb,Ho powders for low-temperature thermometry based on up-conversion fluorescence.” Ceramics International, vol. 39, no. 2, pp. 1129-1134 (http://dx.doi.org/10.1016/j.ceramint.2012.07.036)

Lojpur, V., Nikolić, M.G., Dramićanin, M.D., Mančić, L., Milošević, O., 2013. Low-temperature effects on up-conversion emission of Er3+/Yb3+-co-doped Y2O3. Physica Scripta. 2013, 014054 (doi:10.1088/0031-8949/2013/T157/014054).

Lukić, I., Kesić, Ž., Maksimović, S., Zdujić, M., Liu, H., Krstić, J., Skala, D., 2013, "Kinetics of sunflower and used vegetable oil methanolysis catalyzed by CaO·ZnO", Fuel, vol. 113, pp. 367–378. (http://dx.doi.org/10.1016/j.fuel.2013.05.093)

Mančić, L., Lojpur, V., Marinković, B.A., Dramićanin, M.D., Milošević, O., 2013, "Hydrothermal synthesis of nanostructured Y2O3 and (Y0.75Gd0.25)2O3 based phosphors", Optical Materials, vol. 35, no. 10, pp. 1817-1823 (http://dx.doi.org/10.1016/j.optmat.2013.03.006).

Marinković Stanojević, Z., Mančić, L., Srećković, T. & Stojanović, B. 2013, "Mechanochemical synthesis of bismuth ferrite", Journal of Mining and Metallurgy, Section B: Metallurgy, vol. 49, no. 1, pp. 27-31. (doi:10.2298/JMMB120430039M)

Marinović, V., Marinović, S., Jovanović, M., Jovanović, J., Nešić, G. & Stojanović, M. 2013, "The galvanostatic reduction on modified platinum electrode and determination of trinitrotoluene in neutral solution", International Journal of Electrochemical Science, vol. 8, no. 2, pp. 1986-1998.

Markovic, R., Stevanovic, J., Gvozdenovic, M., Jugovic, B., Grujic, A., Nedeljkovic, D., Stajic-Trosic, J. 2013, "Treatment of Waste Copper Electrolytes Using Insoluble and Soluble Anodes", International Journal of Electrochemical Science, vol. 8, no. 1, pp. 7357-7370.

Marković, S., Lukić, M., Jovalekić, Č., Škapin, S.D., Suvorov, D. & Uskoković, D. 2013, "Sintering effects on microstructure and electrical properties of CaCu 3Ti4O12 ceramics", Ceramic Transactions, vol 240 (DOI: 10.1002/9781118744109.ch37).

Matovic, B., Nikolic, D., Labus, N., Ilic, S., Maksimovic, V., Lukovic, J., Bucevac, D. 2013, "Preparation and properties of porous, biomorphic, ceria ceramics for immobilization of Sr isotopes", Ceramics International, vol. 39, no. 8, pp. 9645-9649 (http://dx.doi.org/10.1016/j.ceramint.2013.05.086).

Milović, M., Jugović, D., Cvjetićanin, N., Uskoković, D., Milošević, A.S., Popović, Z.S., Vukajlović, F.R., 2013, "Crystal structure analysis and first principle investigation of F doping in LiFePO4", Journal of Power Sources, vol. 241, pp. 70–79 (http://dx.doi.org/10.1016/j.jpowsour.2013.04.109).

Mitić, V.V., Paunović, V., Janković, S., Pavlović, V., Antolović, I. & Rančić, D. 2013, "Electronic ceramic structure within the Voronoi cells model and microstructure fractals contacts surfaces new frontier applications", Science of Sintering, vol. 45, no. 2, pp. 223-232. http://dx.doi.org/10.2298/SOS1302223M

Mitrovic, A., Zdujic, M. 2013, "Mechanochemical treatment of Serbian kaolin clay to obtain high reactive pozzolana", Journal of the Serbian Chemical Society, vol. 78, no. 4, pp. 579–590. (doi:10.2298/JSC120829107M)

Nikolic, M.V., Aleksic, O.S., Radojcic, B.M., Lukovic, M.D., Nikolic, N., Djuric, Z., 2013, "Optimization and Application of NTC Thick Film Segmented Thermistors", Key Engineering Materials 543, 491–494 (http://dx.doi.org/10.4028/www.scientific.net/KEM.543.491).

Nikolic, M.V., Sekulic, D.L., Nikolic, N., Slankamenac, M.P., Aleksic, O.S., Danninger, H., Halwax, E., Pavlovic, V.B. & Nikolic, P.M. 2013, "Structural and electrical properties of Ti doped alpha-Fe2O3", Science of Sintering, vol. 45, no. 3, pp. 281-292 (doi:10.2298/SOS1303281N).

Nikolic, P.M., Paraskevopoulos, K.M., Zorba, T.T., Djuric, Z.Z., Pavlidou, E., Vujatovic, S.S., Blagojevic, V., Aleksic, O.S. & Nikolic, M.V. 2013, "Far infrared reflectivity spectra of lead-telluride doped with Mn and Yb", Optoelectronics and Advanced Materials, Rapid Communications, vol. 7, no. 5-6, pp. 362-366.

Nikolić, Z., Shiljkut, V.M., Nikolić, D., 2013, "Diesel-solar electricity supply for remote monasteries", Journal of Renewable and Sustainable Energy, vol. 5, pp. 041815. (https://doi.org/10.1063/1.4813068)

Peleš, A., Dorđević, N., Obradović, N., Tadić, N., Pavlović, V.B., 2013, "Influence of prolonged sintering time on density and electrical properties of isothermally sintered cordierite-based ceramics", Science of Sintering 45, 157–164. (http://dx.doi.org/10.2298/SOS1302157P)

Petrovic, V.V., Milosevic, H. & Pavlovic, V.B. 2013, "Investigation of sintering kinetics of magnesium titanate", Science of Sintering, vol. 45, no. 2, pp. 133-139. (http://dx.doi.org/10.2298/SOS1302133P)

Purenovic, J., Mitic, V.V., Kocic, L., Pavlovic, V., Randjelovic, M., Purenovic, M. 2013, "Intergranular area microalloyed aluminium-silicate ceramics fractal analysis", Science of Sintering, vol. 45, no. 1, pp. 117–126. (doi:10.2298/SOS1301117P)

Rafailović, L.D., Gammer, C., Rentenberger, C., Trisović, T., Kleber, C., Karnthaler, H.-P., 2013, "Enhanced oxygen evolution and reduction reactions of porous ternary NiCoFe foam electrodes prepared by dynamic hydrogen template deposition", Nano Energy, vol. 2, no. 4, pp. 523 - 529 (http://dx.doi.org/10.1016/j.nanoen.2012.12.004).

Sarajlić, M., Đurić, Z., Jović, V., Petrović, S., Đorđević, D., 2013, "An adsorption-based mercury sensor with continuous readout", Microsystem Technologies, vol. 19, no. 5, pp. 749-755 (DOI: 10.1007/s00542-012-1679-6).

Sarajlić, M., Đurić, Z., Jović, V., Petrović, S., Đorđević, D., 2013, "Detection Limit for an Adsorption-Based Mercury Sensor", Microelectronic Engineering, vol. 103, pp. 118–122 (http://dx.doi.org/10.1016/j.mee.2012.10.009).

Spasojević, M.D., Trišović, T.L., Ribić-Zelenović, L. & Spasojević, P.M. 2013, "Development of RuO2/TiO2 titanium anodes and a device for in situ active chlorine generation", Hemijska Industrija, vol. 67, no. 2, pp. 313-321 (doi:10.2298/HEMIND120414076S)

Stanković, A., Dimitrijević, S., Uskoković, D. 2013, "Influence of size scale and morphology on antibacterial properties of ZnO powders hydrothemally synthesized using different surface stabilizing agents", Colloids and Surfaces B: Biointerfaces, Vol. 102, pp. 21-28 (http://dx.doi.org/10.1016/j.colsurfb.2012.07.033)

Stevanović, M.M., Uskokovic, V., Filipovic, M.R., Skapin, S.D., Uskokovic, D., 2013, "Composite PLGA/AgNpPGA/AscH nanospheres with combined osteoinductive, antioxidative and antimicrobial activities", ACS Applied Materials and Interfaces, vol. 5, no. 18, pp 9034–9042 (http://dx.doi.org/10.1021/am402237g).

Stojanović, Z., Otoničar, M., Lee, J., Stevanović, M.M., Hwang, M.P., Lee, K.H., Choi, J., Uskoković, D., 2013, "The solvothermal synthesis of magnetic iron oxide nanocrystals and the preparation of hybrid poly(L-lactide)-polyethyleneimine magnetic particles", Colloids and Surfaces B: Biointerfaces, vol. 109, pp. 236–243 (http://dx.doi.org/10.1016/j.colsurfb.2013.03.053).

Uskoković, V., Hoover, C., Vukomanović, M., Uskoković, D.P., Desai, T.A., 2013, "Osteogenic and Antimicrobial Nanoparticulate Calcium Phosphate and Poly-(D, L-Lactide-co-Glycolide) Powders for the Treatment of Osteomyelitis", Materials Science and Engineering: C, vol. 33, no. 6, pp. 3362 - 3373 (http://dx.doi.org/10.1016/j.msec.2013.04.023).

Vučen, S.R., Vuleta, G., Crean, A.M., Moore, A.C., Ignjatović, N. & Uskoković, D. 2013, "Improved percutaneous delivery of ketoprofen using combined application of nanocarriers and silicon microneedles", Journal of Pharmacy and Pharmacology, vol. 65, no. 10, pp. 1451-1462 (DOI: 10.1111/jphp.12118)

Vujković, M., Jugović, D., Mitrić, M., Stojkovic, I., Cvjetićanin, N., Mentus, S., 2013, "The LiFe(1-x)VxPO4/C Composite Synthesized by Gel-Combustion Method, with Improved Rate Capability and Cycle Life in Aerated Aqueous Solutions". Electrochimica Acta, vol. 109, pp. 835–842 (http://dx.doi.org/10.1016/j.electacta.2013.07.219).

2012

Antov, M., Jugović, B., Gvozdenović, M., Knežević-Jugović, Z. 2012, "Partitioning of cellulolytic activity in the polyethylene glycol/dextran two-phase systems", Acta periodica technologica, no. 43, pp. 151–158 (http://dx.doi.org/10.2298/APT1243151A).

Baroso, I., Mena, I., Gomez, L.S., Milosevic, O., Rabanal, M.E., 2012, "Evaluación de las propiedades luminiscentes y detección de Eu2+ en partículas nanoestructuradas del sistema Gd2-x EuxO3 (x= 0.05, 0.10 y 0.30)", Boletín de la Sociedad Espanola de Cerámica y Vidrio, vol. 51, pp. 255–260 (doi:10.3989/cyv.362012)

Barudzija, T., Gusev, A., Jugovic, D., Dramicanin, M., Zdujic, M., Jovalekic, C., Mitric, M., 2012. Structural and magnetic properties of mechanochemically synthesized nanocrystalline titanium monoxide. Hemijska industrija 66, 181–186 (doi:10.2298/HEMIND111027090B).

Barudžija, T., Gusev, A.A., Jugović, D., Marinović-Cincović, M., Dramićanin, M., Zdujić, M., Jovalekić, C. & Mitrić, M. 2012, "Structural and magnetic properties of mechanochemically synthesized nanosized yttrium titanate", Hemijska Industrija, vol. 66, no. 3, pp. 309-315 (http://dx.doi.org/10.2298/HEMIND111103103B).

Dugandžić, I.M., Jovanović, D.J., Mančić, L.T., Zheng, N., Ahrenkiel, S.P., Milošević, O.B., Šaponjić, Z.V. and Nedeljković, J.M., 2012. Surface modification of submicronic TiO 2 particles prepared by ultrasonic spray pyrolysis for visible light absorption. Journal of Nanoparticle Research, Vol. 14 no. 10, 1157 (DOI: 10.1007/s11051-012-1157-1).

Djordjevic, N.G., Obradovic, N. & Filipovic, S. 2012, "Electrical properties of mechanochemically activated cordierite ceramics", Powder Metallurgy and Metal Ceramics, vol. 51, no. 1-2, pp. 83-86 (DOI: 10.1007/s11106-012-9400-y)

Djurić, Z.G., Radulović, K.T., Jokić, I.M. & Frantlović, M.P. 2012, "Characterization of adsorption-desorption processes on semiconductor surfaces using nanocantilever mass sensors", 2012 28th International Conference on Microelectronics - Proceedings, MIEL 2012, pp. 161. (doi:  10.1109/MIEL.2012.6222823)

Elezović, N.R., Babić, B.M., Gajić-Krstajić, Lj., Ercius, P., Radmilović, V.R., Krstajić, N.V., Vračar, Lj.M. 2012, "Pt Supported on Nano-tungsten Carbide as a Beneficial Catalyst for the Oxygen Reduction Reaction in Alkaline Solution". Electrochimica Acta, vol. 69, pp. 239-246 (http://dx.doi.org/10.1016/j.electacta.2012.02.105)

Frantlović, M., Jokić, I., Djurić, Z., Radulović, K., 2012. Analysis of the Influence of Competitive Adsorption and Mass Transfer on Adsorbed Mass Fluctuations in Affinity-based Biosensors. Procedia Engineering 47, 957–960. (http://dx.doi.org/10.1016/j.proeng.2012.09.305)

Grgur, B. N., Žeradjanin, A., Gvozdenović, M. M., Maksimović, D., Trišović T. Lj. and Jugović, B. Z., 2012, "Electrochemical characteristics of rechargeable polyaniline/lead dioxide cell". Journal of Power Sources, vol. 217, pp. 193–198. http://dx.doi.org/10.1016/j.jpowsour.2012.06.025

Gvozdenović, M.M., Jugović, B.Z., Trišović, T.Lj., Stevanović, J.S., Plazinić, M.V., Grgur, B.N.2012, "Electrochemical characteristics of polyaniline/lead-dioxide power source", Annals of the Faculty of Engineering Hunedoara: International Journal of Engineering, vol. X, no. 3, pp. 445-448.

Jambrec, D., Gvozdenovic, M., Antov, M., Grgur, B., Jokic, B., Stevanovic, J., Jugovic, B., 2012, "Electrochemically deposited nano fibrous polyanilne for amperometric determination of glucose", Digest journal of nanomaterials and biostructures, vol. 7, pp. 785–794.

Jokić, I., Djurić, Z., Frantlović, M., Radulović, K., Krstajić, P., Jokić, Z. 2012, “Fluctuations of the number of adsorbed molecules in biosensors due to stochastic adsorption-desorption processes coupled with mass transfer.” Sensors and Actuators B: Chemical, vol. 166-167, pp. 535–543 (http://dx.doi.org/10.1016/j.snb.2012.03.004).

Jovanović, I., Mančić, D., Paunović, V., Radmanović, M. & Mitić, V.V. 2012, "Metal rings and discs Matlab/Simulink 3D model for ultrasonic sandwich transducer design", Science of Sintering, vol. 44, no. 3, pp. 287-298. (doi:10.2298/SOS1203287J)

Jović, B.M., Lačnjevac, U.C., Jović, V.D., Gajić-Krstajić, L.M., Krstajić, N.V. 2012, "On the kinetics of the hydrogen evolution reaction on Ni-MoO x composite catalysts in alkaline solutions", Journal of the Serbian Chemical Society, vol. 77, no. 2, pp. 211-224 ( doi:10.2298/JSC110621185J)

Jugović, D., Mitrić, M., Kuzmanović, M., Cvjetićanin, N., Marković, S., Škapin, S. D., Uskoković, D. 2012, "Rapid crystallization of LiFePO4 particles by facile emulsion-mediated solvothermal synthesis", Powder Technology, vol. 219, pp. 128–134 (doi:10.1016/j.powtec.2011.12.028).

Kamanina, N.V., Serov, S.V., Shurpo, N.A., Likhomanova, S.V., Timonin, D.N., Kuzhakov, P.V., Rozhkova, N.N., Kityk, I.V., Plucinski K.J. and D. P. Uskokovic 2012, "Polyimide-fullerene nanostructured materials for nonlinear optics and solar energy applications", Journal of Materials Science. Materials in Electronics, vol. 23, no. 8, pp. 1538-1542 (DOI: 10.1007/s10854-012-0625-9).

Karan, B., 2012. "Towards implementation of far background tracker for vision-based robot navigation", in: CINTI 2012 - 13th IEEE International Symposium on Computational Intelligence and Informatics, Proceedings. pp. 353–358 (DOI: 10.1109/CINTI.2012.6496789)

Kesić, Ž., Lukić, I., Brkić, D., Rogan, J., Zdujić, M., Liu, H. & Skala, D. 2012, "Mechanochemical preparation and characterization of CaO·ZnO used as catalyst for biodiesel synthesis", Applied Catalysis A: General, vol. 427-428, pp. 58-65 (http://dx.doi.org/10.1016/j.apcata.2012.03.032)

Kosanović, D., Obradović, N., Živojinović, J., Filipović, S., Maričić, A., Pavlović, V., Tang, Y. and Ristić, M.M. 2012, "Mechanical-Chemical Synthesis Ba0.77Sr0.23TiO3", Science of Sintering, vol. 44, no. 1, pp. 47-55 (doi: 10.2298/SOS1201047K)

Kosanović, D., Obradović, N., Živojinović, J., Maričić, A., Pavlović, V. P., Pavlović, V. B., Ristić, M. M. 2012, "The Influence of Mechanical Activation on Sintering Process of BaCO3-SrCO3-TiO2 System", Science of Sintering, vol. 44, no. 3, pp. 271-280. (http://dx.doi.org/10.2298/SOS1203271K)

Lojpur, V., Nikolić, M., Mančić, L., Milošević, O., Dramićanin, M.D., 2012, "Up-conversion luminescence in Ho3+ and Tm3+ co-doped Y2O3:Yb3+ fine powders obtained through aerosol decomposition", Optical Materials, vol. 35, no. 1, pp. 38–44 (http://dx.doi.org/10.1016/j.optmat.2012.06.019)

Lukić, M.J., Škapin, S.D., Marković, S., Uskoković, D., 2012, "Processing Route to Fully Dense Nanostructured HAp Bioceramics: From Powder Synthesis to Sintering", Journal of the American Ceramic Society, vol. 95. no. 11, pp. 3394–3402 (DOI: 10.1111/j.1551-2916.2012.05376.x)

Lukić, M.J., Veselinović, Lj., Stojanović, Z., Maček-Kržmanc, M., Bračko, I., Škapin, S.D., Marković, S. and Uskoković, D. 2012, “Peculiarities in sintering behavior of Ca-deficient hydroxyapatite nanopowders”, Materials Letters, vol. 68, pp. 331-335 (doi:10.1016/j.matlet.2011.10.085)

Mancic, L., Lojpur, V., Rabanal, M. E. and Milosevic, O. 2012, "Synthesis of fine YAP:Ce phosphor particles via aerosol route, European Journal of Inorganic Chemistry, no. 16, pp. 2716-2724 (http://dx.doi.org/10.1002/ejic.201101053)

Marković, R., Stevanović, J., Avramović, L., Nedeljković, D., Jugović, B., Stajić-Trošić, J., Gvozdenović, M., 2012. "Copper-Sulfate Pentahydrate as a Product of the Waste Sulfuric Acid Solution Treatment", Metallurgical and Materials Transactions B, vol. 43, no. 6, pp. 1388-1392 (http://dx.doi.org/10.1007/s11663-012-9721-8)

Mitic, V.V., Paunovic, V., Purenovic, J., Jankovic, S., Kocic, L., Antolovic, I. & Rancic, D. 2012, "The contribution of fractal nature to BaTiO3-ceramics microstructure analysis", Ceramics International, vol. 38, no. 2, pp. 1295-1301. (http://dx.doi.org/10.1016/j.ceramint.2011.09.003)

Mitic, V.V., Paunovic, V., Purenovic, J., Kocic, L., Pavlovic, V., 2012. Processing parameter influence on BaTiO3 ceramic fractal microstructure and dielectric characteristics. Advances in Applied Ceramics 111, 360–366. (http://dx.doi.org/10.1179/1743676112Y.0000000026)

Mitic, V.V., Pavlovic, V.B., Paunovic, V., Miljkovic, M., Nedin, J., Dukic, M. 2012, "The influence of consolidation parameters on grain contact surfaces BaTiO3-ceramics", in: Advances and Applications in Electroceramics II - Materials Science and Technology 2011 Conference and Exhibition, MS and T 2011, Ceramic Transactions, 235. pp. 199–205 (DOI: 10.1002/9781118511350.ch20)

Nikolic, M.V., Slankamenac, M.P., Nikolic, N., Sekulic, D.L., Aleksic, O.S., Mitric, M., Ivetic, T., Pavlovic, V.B. & Nikolic, P.M. 2012, "Study of dielectric behavior and electrical properties of hematite alpha-Fe2O3 doped with Zn", Science of Sintering, vol. 44, no. 3, pp. 307-321. (doi:10.2298/SOS1203307N)

Nikolic, P.M., Paraskevopoulos, K.M., Zachariadis, G., Valasiadis, O., Zorba, T.T., Vujatovic, S.S., Nikolic, N., Aleksic, O.S., Ivetic, T., Cvetkovic, O., Blagojevic, V., Nikolic, M.V. 2012, "Far infrared study of local impurity modes of Boron-doped PbTe", Journal of Materials Science, vol. 47, 2384–2389 (http://dx.doi.org/10.1007/s10853-011-6057-8).

Obradovic, N., Filipovic, S., Mitric, M., Pavlovic, V., Paunovic, V., Kosanovic, D., Balac, I., Ristic, M., 2012. "Influence of mechanical activation on electrical properties of barium–zinc–titanate ceramics sintered at 1100°C". Powder Metallurgy and Metal Ceramics, vol. 50, pp. 714–718 (doi:10.1007/s11106-012-9380-y).

Obradović, N., Đorđević, N., Filipović, S., Nikolić, N., Kosanović, D., Mitrić, M., Marković, S., Pavlović, V. 2012, "Influence of mechanochemical activation on the sintering of cordierite ceramics in the presence of Bi2O3 as a functional additive", Powder Technology, vol. 218, pp. 157–161 (http://dx.doi.org/10.1016/j.powtec.2011.12.012)

Obradovic, N., Nikolic, M.V., Nikolic, N., Filipovic, S., Mitric, M., Pavlovic, V., Nikolic, P.M., Djordjevic, A.R., Ristic, M.M. 2012. "Synthesis of barium-zinc-titanate ceramics", Science of Sintering, vol. 44, no. 1, pp. 65–71. (doi:10.2298/SOS1201065O)

Obradović, N., Terzić, A., Pavlović, L., Filipović, S. & Pavlović, V. 2012, "Dehydration investigations of a refractory concrete using DTA method", Journal of Thermal Analysis and Calorimetry, vol. 110, no. 1, pp. 37-41. (http://dx.doi.org/10.1007/s10973-011-1880-3).

Poleti, D., Karanović, L., Zdujić, M. & Jovalekić, Č. 2012, "Phase composition of Bi2O3 specimens doped with Ti, Zr and Hf", Journal of the Serbian Chemical Society, vol. 77, no. 8, pp. 1091-1096 (doi:10.2298/JSC110914215P).

Paunović, V., Mitić, V., Miljković, M., Pavlović, V. & Živković, L. 2012, "Ho 2O 3 additive effects on BaTio 3 ceramics microstructure and dielectric properties", Science of Sintering, vol. 44, no. 2, pp. 223-233 (doi:10.2298/SOS1202223P).

Radulovic, K.T., Jokic, I.M., Frantlovic, M.P., Djuric, Z.G., 2012. Adsorption-desorption noise in nanowire FET biosensors, in: 2012 28th International Conference on Microelectronics (MIEL). Presented at the 2012 28th International Conference on Microelectronics (MIEL), pp. 203 –206. (doi: 10.1109/MIEL.2012.6222834)

Sarajlić, M., Djurić, Z. & Jović, V. 2012, "Modeling of the conductivity alteration in the gold thin film-based mercury sensor using the fuchs theory", 2012 28th International Conference on Microelectronics - Proceedings, MIEL 2012, pp. 151. (doi: 10.1109/MIEL.2012.6222820)

Smiljanić, M.L., Srejić, I.L., Marinović, V.M., Rakočević, Z.L. & Štrbac, S.B. 2012, "Inhibiting effect of acetonitrile on oxygen reduction on polycrystalline pt electrode in sodium chloride solution", Hemijska Industrija, vol. 66, no. 3, pp. 327-333 (doi:10.2298/HEMIND111010097S)

Stanković, A., Stojanović, Z., Veselinović, L., Škapin, S. D., Bračko, I., Marković, S. and Uskoković, D. 2012, “ZnO micro and nanocrystals with enhanced visible light absorption.” Materials Science and Engineering: B, vol. 177, no. 13, pp. 1038-1045 (http://dx.doi.org/10.1016/j.mseb.2012.05.013).

Stevanović, M., Savanović, I., Uskoković, V., Škapin, S., Bračko, I., Jovanović, U., and Uskoković, D. 2012, “A new, simple, green, and one-pot four-component synthesis of bare and poly(alpha,gamma,L-glutamic acid)-capped silver nanoparticles.” Colloid & Polymer Science, vol. 290, no. 3, 221-231 (DOI: 10.1007/s00396-011-2540-7).

Stevanović, M.M., Škapin, S.D., Bračko, I., Milenković, M., Petković, J., Filipič, M., Uskoković, D.P. 2012, "Poly(lactide-co-glycolide)/silver nanoparticles: Synthesis, characterization, antimicrobial activity, cytotoxicity assessment and ROS-inducing potential", Polymer, vol 53, no. 14, pp. 2818-2828 (http://dx.doi.org/10.1016/j.polymer.2012.04.057)

Terzić, A., Pavlović, L., Obradović, N., Pavlović, V., Stojanović, J., Miličić, L., Radojević, Z. & Ristić, M.M. 2012, "Synthesis and sintering of high-temperature composites based on mechanically activated fly ash", Science of Sintering, vol. 44, no. 2, pp. 135-146 (doi:10.2298/SOS1202135T).

Vukelic, M.Đ., Mitic, Ž.J., Miljkovic, M.S., Živkovic, J.M., Ignjatovic, N.L., Uskokovic, D.P., Živanov-Curlis, J.Ž., Vasiljevic, P.J., Najman, S.J., 2012. Apatite formation on nanomaterial calcium phosphate/poly-DL-lactide-co-glycolide in simulated body fluid, Journal of Applied Biomaterials & Functional Materials, vol. 10, pp. 43–48 (http://dx.doi.org/10.5301/JABFM.2012.9274)

Vukomanović, M., Šarčev, I., Petronijević, B., Škapin, S.D., Ignjatović, N., Uskoković, D. 2012, "Poly(D,L-lactide-co-glycolide)/hydroxyapatite core-shell nanospheres. Part 4: A change of the surface properties during degradation process and the correspondingin vitrocellular response", Colloids and Surfaces B: Biointerfaces, vol. 91, pp. 144-153 (doi:10.1016/j.colsurfb.2011.10.049).

2011

Bezbradica, D., Jugović, B., Gvozdenović, M., Jakovetić, S., Knežević-Jugović, Z. 2011, "Electrochemically synthesized polyaniline as support for lipase immobilization", Journal of Molecular Catalysis B: Enzymatic, vol. 70, no. 1-2, pp. 55-60 (doi:10.1016/j.molcatb.2011.02.004).

Elezovic, N.R., Babic, B.M., Radmilovic, V., Gajic-Krstajic, L.M., Krstajic, N.V. & Vracar, L.M. 2011, "A novel platinum-based nanocatalyst at a niobia-doped titania support for the hydrogen oxidation reaction", Journal of the Serbian Chemical Society, vol. 76, no. 8, pp. 1139-1152 (doi:10.2298/JSC100823100E).

Elkais, A.R., Gvozdenović, M., Jugović, B., Stevanović, J., Nikolić, N., Grgur N., 2011, "Electrochemical synthesis and characterization of polyaniline thin film and polyaniline powder", Progress in Organic Coatings, vol. 71, no. 1, pp. 32-35 (doi:10.1016/j.porgcoat.2010.12.004).

Elkais, A.R., Gvozdenović, M.M., Jugović, B.Z., Trišović, T.L., Maksimović, M.M. & Grgur, B.N. 2011, "Electrochemical synthesis and corrosion behavior of thin polyaniline film on mild steel, copper and aluminum", Hemijska Industrija, vol. 65, no. 1, pp. 15-21 (doi:10.2298/HEMIND100901069E).

Gvozdenović, M.M., Jugović, B.Z., Bezbradica, D.I. Antov, M.G., Knežević-Jugović, Z.D. & B.N. Grgur, 2011, "Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidize", Food Chemistry, vol. 124, no. 1, pp. 396-400 (doi:10.1016/j.foodchem.2010.06.046).

Gvozdenović, M.M., Jugović, B.Z., Stevanović, J.S., Grgur, B., Trišović, T.Lj. & Jugović, Z.S. 2011, "Electrochemical synthesis and corrosion behavior of polyaniline-benzoate coating on copper", Synthetic Metals, vol. 161, no. 13-14, pp. 1313-1318 (doi:10.1016/j.synthmet.2011.04.029).

Gvozdenović, M.M., Jugović, B.Z., Trišović, T.Lj., Stevanović, J.S. & Grgur, B.N. 2011, "Electrochemical characterization of polyaniline electrode in ammonium citrate containing electrolyte", Materials Chemistry and Physics, vol. 125, no.3, pp. 601-605. (doi:10.1016/j.matchemphys.2010.10.011). 

Jardim, P.M., Mancic, L., Marinkovic, B.A., Milosevic & O., Rizzo, F. 2011, "Nax-yHyTi2-xFexO4·nH2O nanosheets with lepidocrocite-like layered structure synthesized by hydrothermal treatment of ilmenite sand", Central European Journal of Chemistry, vol. 8, no. 3, pp. 415-421 (DOI: 10.2478/s11532-011-0016-8).

Jugović, D., Mitrić, M., Kuzmanović, M., Cvjetićanin, N., Škapin, S., Cekić, B., Ivanovski V. and Uskoković, D. 2011, "Preparation of LiFePO4/C composites by co-precipitation in molten stearic acid", Journal of Power Sources, vol. 196, pp. 4613–4618, doi:10.1016/j.jpowsour.2011.01.072.

Kamanina, N.V., Shurpo, N.A., Likhomanova, S.V.,  Serov, Sv., Vasilyev, P. Ya., Pogareva, V.A., Studenov, V.I. & Uskokovic, D.P. 2011, "Influence of the Nanostructures on the Surface and Bulk Physical Properties of Materials", Acta Physica Polonica A, vol. 120, no. 2, pp. 256-259.

Kosanović D., Maričić A., Mitrović N. & Ristić M.M. 2011, "Interdependence of fundamental and applied research in material science", Science of Sintering, vol. 43, no. 2, pp. 119-126 (doi:10.2298/SOS1102119K)

Krstajić, N.V., Gajić-Krstajić, Lj. Lačnjevac, U., Jović, B.M., Mora, S. & Jović, V.D. 2011, "Non-noble metal composite cathodes for hydrogen evolution. Part I: The Ni–MoOx coatings electrodeposited from Watt’s type bath containing MoO3 powder particles", International Journal of Hydrogen Energy, vol. 36, no. 11, pp. 6441-6449 (doi:10.1016/j.ijhydene.2011.02.105).

Lukić, M., Stojanović, Z., Škapin, S.D., Maček-Kržmanc, M., Mitrić, M., Marković, S., Uskoković, D. 2011, "Dense fine-grained biphasic calcium phosphate (BCP) bioceramics designed by two-step sintering", Journal of the European Ceramic Society, vol. 31, no. 1-2, pp. 19-27 (doi:10.1016/j.jeurceramsoc.2010.09.00)

Mancic, L., Marinkovic, B.A., Marinkovic, K., Dramicanin, M. & Milosevic, O. 2011, "Soft chemistry routes for synthesis of rare earth oxide nanoparticles with well defined morphological and structural characteristics", Journal of Nanoparticle Research, vol. 13, no. 11, pp. 5887-5897(DOI: 10.1007/s11051-010-0215-9).

Marinković Stanojević, Z., Branković, Z., Jagličić, Z., Jagodič, M., Mančić, L., Bernik, S., Rečnik, A., Branković, G. 2011, "Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis", Journal of Nanoparticle Research, vol. 13, no. 8, pp. 3431-3439 (DOI: 10.1007/s11051-011-0265-7).

Marković, S. & Uskoković, D. 2011, "Sintering of defect-free BaTi0.975Sn0.025O 3/BaTi0.85Sn0.15O3 functionally graded materials", Ceramic Transactions, vol. 226, pp. 97-106.

Marković, S., Veselinović, Lj., Lukić, M., Karanović, Lj. Bračko, I., Ignjatović, N. & Uskoković, D. 2011, "Synthetical bone-like and biological hydroxyapatites: a comparative study of crystal structure and morphology", Biomedical Materials, vol. 6, 045005 (doi: 10.1088/1748-6041/6/4/045005).

Mitić, V., Paunović, V., Pavlović, V.& Živković, L. 2011, "Sintering process influence on microstructure and intergranular impedance of rare-earth modified BaTiO3-ceramics", Science of Sintering, vol. 43, no. 3, pp. 277-287. (doi:10.2298/SOS1103277M)

Mitic, V.V., Pavlovic, V., Paunovic, V., Purenovic, J., Kocic, Lj., Jankovic, S., Antolovic, I., Rancic, D. 2011, "Intergranular properties and structural fractal analysis of BaTiO 3-ceramics doped by rare earth additives, Ceramic Engineering and Science Proceedings, vol. 32, vol. 8, pp. 121-132.

Nikolić, M.V., Radojčić, B.M., Aleksić, O.S., Luković, M.D. & Nikolić, P.M. 2011, "A thermal sensor for water using self-heated NTC thick-film segmented thermistors", IEEE Sensors Journal, vol. 11, no. 8, pp. 1640-1645. doi:10.1109/JSEN.2010.2103309

Nikolić, P.M., Paraskevopoulos, K.M., Pavlidou, E., Zorba, T.T., Ivetić, T., Vujatović, S.S., Aleksić, O.S., Nikolić, N., Cvetković, O., Blagojević, V. & Nikolić, M.V. 2011, "Temperature dependence of In1-x Ga x Sb reflectivity in the far infrared", Materials Chemistry and Physics, vol. 125, no. 1-2, pp. 72-76 (doi:10.1016/j.matchemphys.2010.08.073).

Obradović, N., Filipović, S., Pavlović, V., Mitrić, M., Marković, S., Mitić, V., Đorđević N. & Ristić, M.M. 2011, "Isothermal sintering of barium-zinc-titanate ceramics", Ceramics International, vol. 37, no. 1, pp. 21-27 (doi:10.1016/j.ceramint.2010.07.001).

Obradović, N., Filipović, S., Pavlović, V.B., Maričić, A., Mitrović, N. & Ristić, M.M. 2011, "Sintering of mechanically activated magnesium-titanate and barium-zinc-titanate ceramics", Science of Sintering, vol. 43, no. 2, pp. 145-151 (http://dx.doi.org/10.2298/SOS1102145O).

Obradović, N., Filipović, S., Pavlović, V.,  Paunović, V., Mitrić, M. & Ristić, M. M. 2011, "Structural and Electrical Properties of Sintered Barium-Zinc-Titanate Ceramics, Acta Physica Polonica A, vol. 120, no. 2, pp. 322-325.

Pavlović, V.P., Krstić, J., Šćepanović, M.J., Dojčilović, J., Minić, D.M., Blanuša, J., Stevanović, S., Mitić, V.V. Pavlović, V.B. 2011, "Structural Investigation of Mechanically Activated Nanocrystalline BaTiO3 Powders", Ceramics International, vol. 37, no. 7, pp. 2513-2518 (doi:10.1016/j.ceramint.2011.03.064)

Petković, J., Žegura, B., Stevanović, M., Drnovšek, N., Uskoković, D., Novak, S. & Filipič, M. 2011, “DNA damage and alterations in expression of DNA damage responsive genes induced by TiO2 nanoparticles in human hepatoma HepG2 cells”, Nanotoxicology, Vol. 5, No. 3, pp. 341–353 (doi:10.3109/17435390.2010.507316).

Petrovic, D., Ajdukovic, Z., Petrovic, S., Ignjatovic, N., Najman, S., Vuckovic, I., 2011. "Semiquantitative radiological and clinical assessment of the restoration of alveolar bone defects treated with biphasic calcium phosphate/poly-dl-lactide-co glycolide composite." HEALTHMED 5, 2105–2114.

Purenović, J., Mitić, V.V., Kocić, L., Pavlović, V.B., Paunović, V. & Purenović, M. 2011, "Electrical properties and microstructure fractal analysis of magnesium-modified aluminium-silicate ceramics", Science of Sintering, vol. 43, no. 2, pp. 193-204 (http://dx.doi.org/10.2298/SOS1102193P).

Purenovic, J., Mitic, V. V., Paunovic, V. and Purenovic, M. 2011, "Microstructure characterization of porous microalloyed aluminium-silicate ceramics", Journal of Mining and Metallurgy Section B – Metallurgy, vol. 47, no. 2B, pp. 157-169 (http://dx.doi.org/10.2298/JMMB110331011P)

Rabrenovic, B., Dimic, E., Maksimovic, M., Sobajic, S & Gajic-Krstajic, L. 2011, “Determination of Fatty Acid and Tocopherol Compositions and the  Oxidative Stability of Walnut (Juglans regia L.) Cultivars Grown in  Serbia.” Czech Journal of Food Sciences, vol. 29, no. 1, pp. 74–78.

Savić, S.M., Mančić, L., Vojisavljević, K., Stojanović, G., Branković, Z., Aleksić, O.S., Branković, G. 2011, "Microstructural and electrical changes in nickel manganite powder induced by mechanical activation",   Materials Research Bulletin, vol. 46, no. 7, pp. 1065-1071 (doi:10.1016/j.materresbull.2011.03.008).

Stanković, A., Veselinović, Lj, Škapin, S.D., Marković, S. and Uskoković, D. 2011, "Controlled mechanochemically assisted synthesis of ZnO nanopowders in the presence of oxalic acid", Journal of Materials Science, vol. 46, no. 11, pp. 3716-3724 (DOI: 10.1007/s10853-011-5273-6).

Stevanović, M., Kovačević, B., Petković, J., Filipič, M., Uskoković, D. 2011, "Effect of poly-alpha, gamma, L-glutamic acid as a capping agent on morphology and oxidative stress-dependent toxicity of silver nanoparticles", International Journal of Nanomedicine, vol. 6, pp. 2837-2847 (http://dx.doi.org/10.2147/IJN.S24889)

Stevanovic, M., Pavlovic, V., Petkovic, J., Filipic, M. & Uskokovic, D. 2011, “ROS-inducing potential, influence of different porogens and in vitro degradation of poly (D,L-lactide-co-glycolide)-based material.” Express Polymer Letters, vol. 5, pp. 996-1008. (http://dx.doi.org/10.3144/expresspolymlett.2011.97)

Tadić, M., Čitaković, N., Panjan, M., Stojanović, Z., Marković, D. and Spasojević, V. 2011, "Synthesis, morphology, microstructure and magnetic properties of hematite submicron particles", Journal of Alloys and Compounds, vol. 509, no. 28, pp. 7639–7644 (doi:10.1016/j.jallcom.2011.04.117).

Terzić, A., Pavlović, L. & Mitić, V. 2011, "Determination of apparent porosity level of refractory concrete using ultrasonic pulse velocity technique and image analysis", Mechanical Properties and Performance of Engineering Ceramics and Composites VI, pp. 151-161. (Ceramic Engineering and Science Proceedings, vol. 32)

Uskoković, V. & Uskoković, D. 2011, “Nanosized Hydroxyapatite and Other Calcium Phosphates: Chemistry of Formation and Application as Drug and Gene Delivery Agents”, Journal of Biomedical Materials Research: Part B – Applied Biomaterials, vol. 96B, no. 1, pp. 152-191 (DOI: 10.1002/jbm.b.31746).

Veljković, I., Poleti, D., Karanović, L.J., Zdujić, M. & Branković, G. 2011, "Solid state synthesis of extra phase-pure Li 4Ti 5O12 spinel", Science of Sintering, vol. 43, no. 3, pp. 343-351 (doi:10.2298/SOS1103343V)

Vukomanović, M., Bračko, I., Poljanšek, I., Uskoković, D.P., Skapin, S.D. & Suvorov, D. 2011, "The Growth of Silver Nanoparticles and their Combination with Hydroxyapatite to Form Composites via a Sonochemical Approach", Crystal Growth & Design, vol. 11, no. 9, pp 3802–3812 (DOI: 10.1021/cg2003436).

Vukomanović, M., Škapin, S.D., Jančar, B., Maksin, T., Ignjatović, N., Uskoković, V. & Uskoković, D. 2011, “Poly(d,l-lactide-co-glycolide)/hydroxyapatite Core-shell Nanospheres: Part 1: A Multifunctional System for Controlled Drug Delivery”, Colloids & Surfaces: B Biointerfaces, vol. 82, no. 2, pp. 404-413. (doi:10.1016/j.colsurfb.2010.09.011).

Vukomanović, M., Škapin, S.D., Poljanšek, I., Žagar, E., Kralj, B., Ignjatović, N. & Uskoković, D. 2011, “Poly(D,L-lactide-co-glycolide)/hydroxyapatite core-shell nanospheres: Part 2: Simultaneous release of a drug and prodrug”, Colloids & Surfaces: B Biointerfaces, vol. 82, no. 2, pp. 414-421.(doi:10.1016/j.colsurfb.2010.09.012).

Vukomanović, M., Zavašnik-Bergant, T., Bračko, I., Radmilović, V., Škapin, S.D., Ignjatović, N. & Uskoković, D. 2011, "Poly(D,L-lactide-co-glycolide)/hydroxyapatite Core-shell Nanospheres. Part 3: Properties of hydroxyapatite nano-rods and investigation of a distribution of the drug within the composite", Colloids and Surfaces B: Biointerfaces, vol. 87, pp. 226-235 (doi:10.1016/j.colsurfb.2011.05.023).

Zlatkov, B.S., Nikolic, M.V., Zeljkovic, V., Obradovic, N., Pavlovic, V.B. & Aleksic, O. 2011, "Analysis and modeling of sintering of Sr-hexaferrite produced by PIM technology", Science of Sintering, vol. 43, no. 1, pp. 9-20 (doi:10.2298/SOS1101009Z).

2010

Aleksendrić, D., Balać, I., Tang, C.Y., Tsui, C.P., Uskoković, P.S., Uskoković, D.P. 2010, “Surface Characterisation of PLLA Polymer in HAp/PLLA Biocomposite Material by Means of Nanoindentation and Artificial Neural Networks”, Advances in Applied Ceramics, vol. 109, no. 2, pp. 65-70 (https://doi.org/10.1179/174367509X12502621261613).

Brankovic, Z., Marinkovic Stanojevic, Z., Mancic, L., Vukotic, V., Bernik, S. & Brankovic, G. 2010, "Multiferroic bismuth manganite prepared by mechanochemical synthesis", Journal of the European Ceramic Society, vol. 30, no. 2, pp 277-281 (doi:10.1016/j.jeurceramsoc.2009.06.030).

Elezovic, N.R., Babic, B.M., Gajic-Krstajic, Lj., Radmilovic, V., Krstajic, N.V., Vracar, L.J. 2010, "Synthesis, characterization and electrocatalytical behavior of Nb-TiO2/Pt nanocatalyst for oxygen reduction reaction", Journal of Power Sources, vol. 195, no. 13, pp. 3961-3968 (doi:10.1016/j.jpowsour.2010.01.035).

Elezović, N.R., Gajić-Krstajić, L.M., Vračar, L.M. & Krstajić, N.V. 2010, "Effect of chemisorbed CO on MoOx–Pt/C electrode on the kinetics of hydrogen oxidation reaction", International Journal of Hydrogen Energy, vol. 35, no. 23, pp.12878-12887 (doi:10.1016/j.ijhydene.2010.09.004).

Filipović S., Obradović N., Pavlović V.B., Marković S., Mitrić M. & Ristić M.M. 2010, "Influence of mechanical activation on microstructure and crystal structure of sintered MgO-TiO2 system", Science of Sintering, vol. 42, no. 2, pp. 143-151 (DOI:10.2298/SOS100518002F).

Ignjatovic, N.L., Ajdukovic, Z.R., Savic, V.P. & Uskokovic, D.P. 2010, “Size effect of calcium phosphate coated with poly-DL-lactide- co-glycolide on healing processes in bone reconstruction.” Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol. 94B, no. 1, pp. 108-117. (doi:10.1002/jbm.b.31630).  

Ignjatović, N.L., Ninkov, P., Sabetrasekh, R., Uskoković, D.P. 2010, “A Novel Nano Drug Delivery System based on Tigecycline-Loaded Calciumphosphate Coated with Poly-Dl-Lactide-co-Glycolide“, Journal of Materials Science. Materials in Medicine, vol. 21, no. 1, pp. 231-239 (doi: 10.1007/s10856-009-3854-6).

Jovalekić, C. & Zdujić, M. 2010, "Electret state in Bi4Ti3O12 ceramics", Ceramics International, vol. 36, no. 2, pp. 789-792 (doi:10.1016/j.ceramint.2009.09.019).

Jovanovic, M., Jovanovic, J., Jovanovic, A., Marinovic, V. 2010, "Introduction of cleaner production in the tank farm of the Pancevo Oil Refinery, Serbia, Journal of Cleaner Production, vol. 18, no. 8, pp. 791-798 (doi:10.1016/j.jclepro.2010.01.002).

Kamanina, N.V., Serov, S.V., Savinov, V.P. & Uskoković, D.P. 2010, “Photorefractive and photoconductive features of the nanostructured materials.” International Journal of Modern Physics B, vol. 24, no. 6-7, pp. 695-702 (DOI: 10.1142/S0217979210064319).

Kamanina, N.V., Vasilyev, P.Y., Serov, S.V., Savinov, V.P., Bogdanov, K.Y. & Uskokovic, D.P. 2010, "Nanostructured materials for optoelectronic applications", Acta Physica Polonica A, vol. 117, no. 5, pp. 786-790.

Mancic, L., Marinkovic, K. Marinkovic, B.A. Dramicanin, M., Milosevic, O. 2010, "YAG:Ce3+ nanostructured particles obtained via spray pyrolysis of polymeric precursor solution", Journal of the European Ceramic Society, vol. 30, no. 2, pp 577-582 (doi:10.1016/j.jeurceramsoc.2009.05.037).

Marinkovic, K., Mancic, L., Gomez, L.S., Rabanal, M.E., Dramicanin, M. & Milosevic, O. 2010, "Photoluminescent properties of nanostructured Y2O3:Eu3+ powders obtained through aerosol synthesis", Optical Materials, vol. 32, no. 12, 1606-1611 (doi:10.1016/j.optmat.2010.05.023).

Marinkovic, K.R., Mancic, L.T., Rabanal, M.E., Gomez, L., Dramicanin, M. & Milosevic, O.B. 2010, "Nanostructured (Y1-xGdx)2O 3:Eu3+ powders obtained through aerosol synthesis, Ceramic Transactions, vol. 219, pp. 83-90.

Marinović, V., Marinović, S., Jovanović, M., Jovanović, J. & Štrbac, S. 2010, "The electrochemical reduction of trinitrotoluene on a platinum wire modified by chemisorbed acetonitrile", Journal of Electroanalytical Chemistry, vol. 648, no. 1, pp. 1-7. (doi:10.1016/j.jelechem.2010.07.008).

Marković, R., Friedrich, B., Stajić–Trošić, J., Jordović, B., Jugović, B., Gvozdenović, M. & Stevanović, J. 2010, "Behaviour of non-standard composition copper bearing anodes from the copper refining process", Journal of Hazardous Materials, vol. 182, no. 1-3, pp. 55-63. doi:10.1016/j.jhazmat.2010.05.137

Marković, S., Jovalekić, Č., Veselinovic, Lj., Mentus S. & Uskoković, D. 2010, “Electrical properties of barium titanate stannate functionally graded materials”, Journal of the European Ceramic Society, vol. 30, no. 6, pp. 1427-1435 (doi:10.1016/j.jeurceramsoc.2009.10.020).  

Marković, S. & Uskoković, D. 2010, "Barium titanate stannate functionally graded materials: Choosing of the Ti/Sn concentration gradient and the influence of the gradient on electrical properties", Ceramic Transactions, vol. 221, pp. 3-17.

Martín, M.I., Gómez, L.S., Milosevic, O. & Rabanal, M.E. 2010, "Nanostructured alumina particles synthesized by the Spray Pyrolysis method: microstructural and morphological analysis, Ceramics International, vol. 36, no. 2, pp. 767-772 (doi:10.1016/j.ceramint.2009.10.013).

Milicevic, D., Trifunovic, S., Dojcilovic, J., Ignjatovic, N. & Suljovrujic, E. 2010, "The influence of gamma radiation on the molecular weight and glass transition of PLLA and HAp/PLLA nanocomposite", Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, vol. 268, no. 17-18, pp. 2744-2749 (doi:10.1016/j.nimb.2010.06.036).

Milicević, D.S., Trifunović, S.B., Mudrinić, T.M., Leskovać, A.R., Ignjatović, N.L., Dojcilović, J. & Suljovrujić, E.H. 2010, "The structure and glass transition behaviour of plla under the influence of gamma radiation", Hemijska Industrija, vol. 64, no. 4, pp. 275-281. (doi:10.2298/HEMIND100329020M)

Mitic, V.V., Nikolic, Z.S., Pavlovic, V.B., Paunovic, V., Miljkovic, M., Jordovic, B. & Zivkovic, L. 2010, "Influence of rare-earth dopants on barium titanate ceramics microstructure and corresponding electrical properties", Journal of the American Ceramic Society, vol. 93, no. 1, pp. 132-137 (doi:10.1111/j.1551-2916.2009.03309.x).

Mitic, V., Pavlovic, V.B., Kocic, L., Paunovic, V. & Mancic, D. 2010, "Intergranular fractal impedance analysis of microstructure and electrical properties of rare-earth doped BaTiO3", in: Advances in Electronic Ceramics II - A Collection of Papers Presented at the 33rd International Conference on Advanced Ceramics and Composites, pp. 79-91, DOI: 10.1002/9780470584422.ch7. (Ceramic Engineering and Science Proceedings, vol. 30, no. 9)

Mitic, V., Pavlovic, V.B., Paunovic, V., Kocic, L. & Zivkovic, L. 2010, Characterization and microstructure evolution in Er-DOPED BaTiO3 ceramics", Ceramic Transactions, vol. 221, pp. 89-103.

Nikolic, M.V., Paraskevopoulos, K.M., Ivetić, T., Zorba, T.T., Vujatovic, S.S., Pavlidou, E., Blagojevic, V., Bojicic, A., Aleksic, O.S., Nikolic, N., König, W. & Nikolic, P.M. 2010, "Optical properties of PbTe doped with Nd", Journal of Materials Science, vol. 45, no. 21, pp. 5910-5914 (DOI: 10.1007/s10853-010-4670-6).

Nikolić, P.M., Vujatović, S.S., Ivetić, T., Nikolić, M.V., Cvetković, O., Aleksić, O.S., Blagojević, V., Brankovic, G. & Nikolić, N. 2010, "Thermal diffusivity of single crystal Bi0.9Sb0.1", Science of Sintering, vol. 42, no. 1, pp. 45-50. (doi:10.2298/SOS1001045N)

Nikolić, P.M., Vujatović, S.S., Paraskevopoulos, K.M., Pavlidou, E., Zorba, T.T., Ivetić, T., Cvetković, O., Aleksić, O.S., Blagojević, V. & Vesna Nikolić, M. 2010, "Far infrared properties of PbTe doped with Hg", Optoelectronics and Advanced Materials, Rapid Communications, vol. 4, no. 2, pp. 151-153.

Rafailovic, L.D., Karnthaler, H.P., Trisovic, T. & Minic, D. 2010, "Microstructure and mechanical properties of disperse Ni-Co alloys electrodeposited on Cu substrates", Materials Chemistry and Physics, vol. 120, no. 2-3, pp. 409-416 (doi:10.1016/j.matchemphys.2009.11.029).

Rafailović, L.D., Minić, D.M., Karnthaler, H.P., Wosik, J., Trišović, T. & Nauer, G.E. 2010, "Study of the dendritic growth of Ni-Co alloys electrodeposited on Cu substrates", Journal of the Electrochemical Society, vol. 157, no. 5, pp. D295-D301. (DOI: 10.1149/1.3336957)

Slankamenac, M., Ivetić, T., Nikolić, M.V., Ivetić, N., Živanov, M. & Pavlović, V.B. 2010, "Impedance Response and Dielectric Relaxation in Liquid-Phase Sintered Zn2SnO4-SnO2 Ceramics", Journal of Electronic Materials, vol. 39, no. 4, pp. 447-455 (doi:10.1007/s11664-010-1118-3).

Stojanovic, D., Orlovic, A., Glisic, S.B., Markovic, S., Radmilovic, V., Uskokovic, P.S. & Aleksic, R. 2010, "Preparation of MEMO silane-coated SiO2 nanoparticles under high pressure of carbon dioxide and ethanol", The Journal of Supercritical Fluids, vol. 52, no. 3, pp. 276-284 (doi:10.1016/j.supflu.2010.02.004).

Stojković, I., Cvjetićanin, N., Marković, S., Mitrić, M. & Mentus, S. 2010, "Electrochemical behaviour of v2O5 xerogel and v 2O5 xerogel/C composite in an aqueous LiNO3 and Mg(NO3)2 solutions", Acta Physica Polonica A, vol. 117, no. 5, pp. 837-840.

Veselinović, Lj., Karanović, Lj., Stojanović, Z., Bračko, I., Marković, S., Ignjatović, N. & Uskoković, D. 2010, “Crystal Structure of Cobalt-Substituted Calcium Hydroxyapatite Nano-Powders Prepared by Hydrothermal Processing”, Journal of Applied Crystallography, vol. 43, pp. 320-327 (doi: 10.1107/S0021889809051395).

Vukomanović, M., Mitrić, M., Škapin, S.D., Žagar, E., Plavec, J., Ignjatović, N., Uskoković, D. 2010, "Influence of ultrasonic processing on the macromolecular properties of poly (D,L-lactide -co-glycolide) alone and in its biocomposite with hydroxyapatite", Ultrasonics Sonochemistry, vol. 17, no. 5, pp. 902-908. (doi:10.1016/j.ultsonch.2010.01.007).


2009

Ajduković, Z., Dimić, A., Stanković, S., Krunić, N., Aleksov, L., Ignjatović. N. 2009, "Mineral substances in the bone tissue and blood of patients with osteoporosis," vol. 62, no. 9-10, pp. 402-406 (https://doi.org/10.2298/MPNS0910402A)

Babić, B., Gulicovski, J., Gajić-Krstajić, L., Elezović, N., Radmilović, V.R., Krstajić, N.V. & Vračar, L.M. 2009. "Kinetic study of the hydrogen oxidation reaction on sub-stoichiometric titanium oxide-supported platinum electrocatalyst in acid solution", Journal of Power Sources, vol. 193, No. 1, pp. 99-106 (doi:10.1016/j.jpowsour.2008.11.142).

Elezović, N.R., Gajić-Krstajić, L., Radmilović, V., Vračar, L. & Krstajić, N.V. 2009, "Effect of chemisorbed carbon monoxide on Pt/C electrode on the mechanism of the hydrogen oxidation reaction", Electrochimica Acta, vol. 54, no. 4, pp. 1375-1382 (doi:10.1016/j.electacta.2008.08.067).

Filipovic, S., Obradovic, N. & Petrovic, V. 2009, "Influence of mechanical activation on structural and electrical properties of sintered MgTiO3 ceramics", Science of Sintering, vol. 41, no. 2, pp. 117-123.

Gomez, L. S., Marinkovic, K., Martin, M. I., Mena, I., Milosevic, O. & Rabanal, M. E. 2009, 'Synthesis and characterization of rare earth oxide nanostructured particles doped with Eu for luminescent applications obtained by aerosol method', Boletin De La Sociedad Espanola De Ceramica Y Vidrio, vol. 48, no. 1, pp. 33-38.

Jevtić, M., Radulović, A., Ignjatović, N., Mitrić, M., Uskoković, D. 2009, "Controlled assembly of poly(D,L-lactide-co-glycolide)/hydroxyapatite core-shell nanospheres under ultrasonic irradiation", Acta Biomaterialia, vol. 5, pp. 208-218 (doi:10.1016/j.actbio.2008.07.026) .

Jovalekić, C., Zdujić, M. & Atanasoska, L. 2009, "Surface analysis of bismuth titanate by Auger and X-ray photoelectron spectroscopy", Journal of Alloys and Compounds, vol. 469, no. 1-2, pp. 441-444 (doi:10.1016/j.jallcom.2008.01.131).

Jugović, B., Gvozdenović, M., Stevanović, J., Trišović, T. & Grgur, B. 2009, "Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources", Materials and Design, vol. 30, no. 8, pp. 3291-3294 (doi:10.1016/j.matdes.2008.12.019).

Jugović, B., Gvozdenović, M., Stevanović, J., Trišović, T. & Grgur, B. 2009, "Characterization of electrochemically synthesized PANI on graphite electrode for potential use in electrochemical power sources", Materials Chemistry and Physics, vol. 114, no. 2-3, pp. 939-942 (doi:10.1016/j.matchemphys.2008.10.069).

Jugović, B.Z., Trišović, T.L., Stevanović, J.S., Gvozdenović, M.M. & Grgur, B.N. 2009, "Citrate-based zinc-polyaniline secondary cell: part I: optimization of the citrate/chloride electrolyte", Journal of Applied Electrochemistry, vol. 39, no. 12, 2521-2528 (doi:10.1007/s10800-009-9946-7).

Jugovic, D. & Uskokovic, D. 2009, "A review of recent developments in the synthesis procedures of LiFePO4 powders, Journal of Power Sources", vol. 180, no. 2, pp. 538-544, doi:10.1016/j.jpowsour.2009.01.074.

Kalezić-Glišović, A., Maričić, V.A., Kosanovic, D.A., Dukić, S. & Simeunović, R. 2009, "Correlation between isothermal expansion and functional properties change of the Fe81B13Si4C2 amorphous alloy", Science of Sintering, vol. 41, no. 3, pp. 283-291. (doi:10.2298/SOS0903283K)

Mancic, L.T., Marinkovic, B.A., Jardim, P.M., Milosevic, O.B., Rizzo, F. 2009, "Precursor Particle Size as the Key Parameter for Isothermal Tuning of Morphology from Nanofibers to Nanotubes in the Na2-xHxTinO2n+1 System through Hydrothermal Alkali Treatment of Rutile Mineral Sand", Crystal Growth and Design, vol. 9, no. 5. pp. 2152–2158.

Marković,  S., Miljković,  M., Jovalekić,  Č., Mentus, S. & Uskoković, D. 2009, "Densification, Microstructure, and Electrical Properties of BaTiO3 (BT) Ceramics Prepared from Ultrasonically De-Agglomerated BT Powders", Materials and Manufacturing Processes, vol. 24, no. 10-11, pp. 1114 – 1123 (doi: 10.1080/10426910903031750).

Markovic, S. & Uskokovic, D. 2009, "The master sintering curves for BaTi0.975Sn0.025O3 / BaTi0.85Sn0.15O3 functionally graded materials, Journal of the European Ceramic Society", vol. 29, no. 11, pp. 2309-2316 (doi:10.1016/j.jeurceramsoc.2009.01.027).

Milosevic, O., Mancic, L., Rabanal, M.E., Gomez, L.S., Marinkovic, K. 2009, "Aerosol route in Processing of Nanostructured Functional Materials", KONA Powder and Particle Journal, vol. 27, pp. 84-106.

Mitic, V., Pavlovic, V.B., Kocic, L.J., Paunovic, V., Mancic, D., 2009. "Application of the Intergranular Impedance Model in Correlating Microstructure and Electrical Properties of Doped BaTiO(3)." Science of Sintering, vol. 41, pp. 247–256. (doi:10.2298/SOS0903247M)

Mitic, V.V., Paunovic, V., Mancic, D., Kocic, L.J., Zivkovic, L.J. & Pavlovic, V.B. 2009, Dielectric properties of batio3 doped with er203 and yb203 based on intergranular contacts model, Ceramic Transactions, vol. 204, pp. 137-144. (DOI: 10.1002/9780470528990.ch16)

Mitranić, I., Stevanović, M., Nedeljković, B., Ignjatović, N. & Uskoković, D. 2009, "Controllable Synthesis of Horseradish Peroxidase Loaded Poly(D,L-lactide) Nanospheres", Journal of Bionanoscience, vol. 3, no 1, pp. 22–32.

Nikolic, M.V., Labus, N. & Ristic, M.M. 2009, "Densification rate and phase structure changes during sintering of zinc titanate ceramics", Ceramics International, vol. 35, no. 8, pp. 3217-3220 (doi:10.1016/j.ceramint.2009.05.028).

Nikolic, M.V., Obradovic, N., Paraskevopoulos, K.M., Zorba, T.T., Savic, S.M. & Ristic, M.M. 2009, "Structural analysis of Zn2TiO4 doped with MgO", Powder Metallurgy and Metal Ceramics, vol. 48, no. 11-12, pp. 712-717 (doi:10.1007/s11106-010-9190-z).

Nikolić, P.M., Paraskevopoulos, K.M., Djukić, S.R., Vujatović, S.S., Labus, N.J., Zorba, T.T., Jović, M., Nikolić, M.V., Bojčić, A., Blagojević, V., Stamenović, B. & Koenig, W. 2008, "Far infrared study of impurity local modes in palladium-doped PbTe and PbSnTe", Journal of Alloys and Compounds, vol. 475, no. 1-2, pp. 930-934 (doi:10.1016/j.jallcom.2008.08.069).

Nikolic, P.M., Paraskevopoulos, K.M., Nikolic, M.V., Vujatovic, S.S., Pavlidou, E., Zorba, T.T., Ivetic, T., Stamenovic, B., Labus, N., Jovic, M. & Ristic, M.M. 2009, "Far infrared properties of sintered Pb0.9Sn0.1Te doped with palladium", Powder Metallurgy and Metal Ceramics, vol. 48, no. 5-6, pp. 353-357 (doi:10.1007/s11106-009-9122-y).

Nikolić, P.M., Paraskevopoulos, K.M., Nikolić, M.V., Vujatović, S.S., Zorba, T.T., Chatzistavrou, X., Stamenović, B., Golić, D.L., Blagojević, V. & Bojičić, A. 2009, "Far infrared study of impurity local modes in Pr doped PbTe", Materials Chemistry and Physics, vol. 114, no. 1, pp. 185-187 (doi:10.1016/j.matchemphys.2008.09.006).

Nikolic, P.M., Paraskevopoulos, K.M., Vujatovic, S.S., Nikolic, M.V., Chatzistavrou, K., Pavlidou, E., Ivetic, T., Blagojevic, V., Bojicic, A. & Dinulovic, D. 2009, "Optical properties of PbTe and PbSnTe doped with Cr", Journal of Alloys and Compounds, vol. 480, no. 2, pp. 893-896 (doi:10.1016/j.jallcom.2009.02.067).

Obradovic, N., Mitric, M., Nikolic, M.V., Minic, D., Mitrovic, N. & Ristic, M.M. 2009, "Influence of MgO addition on the synthesis and electrical properties of sintered zinc-titanate ceramics", Journal of Alloys and Compounds, vol. 471, pp. 272-277 (doi:10.1016/j.jallcom.2008.03.090).

Obradovic, N., Mitrovic, N. & Pavlovic, V. 2009, "Structural and electrical properties of sintered zinc-titanate ceramics", Ceramics International, vol. 35, no. 1, pp. 35-37 (doi: 10.1016/j.ceramint.2007.09.020).

Obradovic, N., Stevanovic, S., Zeljkovic, V., & Ristic, M.M. 2009, "Influence of ZnO specific surface area on its sintering kinetics", Powder Metallurgy and Metal Ceramics, vol. 48, no. 3-4, pp. 182-185 (doi:10.1007/s11106-009-9112-0).

Ristic, M.M., Obradovic, N., Filipovic, S., Bykov, A.I., Vasil'kovskaya, M.A., Klochkov, L.A. & Timofeeva, I.I. 2009, "Formation of magnesium titanates", Powder Metallurgy and Metal Ceramics, vol. 48, no. 7-8, pp. 371-374 (doi: 10.1007/s11106-009-9157-0).

Savić, S.M., Stojanović G.M., Nikolić, M.V., Aleksić, O.S., Luković Golić, D.T. & Nikolić, P.M. 2009, "Electrical and transport properties of nickel manganite obtained by Hall effect measurements", Journal of Materials Science: Materials in Electronics, vol. 20, no. 3, pp. 242-247 (doi: 10.1007/s10854-008-9710-5).

Stevanović, M., Maksin, T., Petković, J., Filipič, M. & Uskoković, D. 2009, "An innovative, quick and convenient labeling method for the investigation of pharmacological behavior and the metabolism of poly(DL-lactide-co-glycolide) nanospheres", Nanotechnology, vol. 20, no. 33, 335102 (12pp), doi: 10.1088/0957-4484/20/33/335102.

Stevanović, M., Uskoković, D. 2009, "Influence of Different Degradation Medium on Release of Ascorbic Acid from Poly(D,L-lactide-co-glycolide) Nano- and Microspheres", Russian Journal of Physical Chemistry A, vol. 83, no. 9, pp. 1457-1460.

Stevanović, M.M., Uskoković, D.P. 2009, "Poly(lactide-co-glycolide)-based micro and nanoparticles for the controlled drug delivery of vitamins", Current Nanoscience, vol. 5, no. 1, pp. 1-14.

Stojanovic, D., Orlovic, A., Markovic, S., Radmilovic, V., Uskokovic, P.S. &  Aleksic, R. 2009, "Nanosilica/PMMA composites obtained by the modification of silica nanoparticles in a supercritical carbon dioxide–ethanol mixture", Journal of Materials Science, vol. 44, no. 23, pp. 6223-6232 (doi: 10.1007/s10853-009-3842-8).

Stojanovic, Z., Veselinovic, Lj., Markovic, S., Ignjatovic, N. & Uskokovic, D. 2009, “Hydrothermal Synthesis of Nanosize Pure and Cobalt-exchanged Hydroxyapatite”, Materials and Manufacturing Processes, vol. 24, no. 10-11, pp. 1096-1103 (doi: 10.1080/10426910903032113).

Vasiljević, P.J., Najman, S.J., Dordević, J.B., Savić, V.P., Vukelić, M.D., Živanov-Čurlis, J.Z., Ignjatović, N.L. & Uskoković, D.P. 2009, "Ektopična osteogeneza i hematopoeza iz implantiranih ćelija koštane srži na matrici od biokompozita hap/plla" (Ectopic osteogenesis and hematopoiesis after implantantion of bone marrow cells seeded on hap/plla scaffold), Hemijska Industrija, vol. 63, no. 4, pp. 301-307. (doi:10.2298/HEMIND0904301V)

Veljković, I., Poleti, D., Zdujić, M. & Karanović, L. 2009, "Mehanohemija oksida titana (Mechanochemistry of titanium oxides)", Hemijska Industrija, vol. 63, no. 3, pp. 247-251. (doi:10.2298/HEMIND0903247V)

Zdujic, M., Jovalekic, C., Poleti, D., Veljkovic, V., Karanovic, Lj. 2009, "Mechanochemically induced amorphous/crystalline phase transition in the Bi4Ti3O12 compound", Materials Letters, vol. 63, no. 29, pp. 2542-2544 (doi:10.1016/j.matlet.2009.08.055).

Zdujić, M., Poleti, D., Jovalekić, Č & Karanović, L. 2009, "Mechanochemical synthesis and electrical conductivity of nanocrystalline delta-Bi2O3 stabilized by HfO2 and ZrO2", Journal of the Serbian Chemical Society, vol. 74, no. 12, pp. 1401-1411 (doi:10.2298/JSC0912401Z)

2008

Grgur, B.N., Gvozdenovic, M.M., Stevanovic, J., Jugovic, B.Z.& Marinovic, M.V. 2008, "Polypyrrole as possible electrode materials for the aqueous based rechargeable zinc batteries", Electrochimica Acta, Vol. 53, No. 14, pp. 4627-4632 (doi:10.1016/j.electacta.2008.01.056).

Grgur, B.N., Ristic, V., Gvozdenovic, M.M., Maksimovic, M.D. & Jugovic, B.Z. (2008), "Polyaniline as possible anode materials for the lead acid batteries", Journal of Power Sources, Vol. 181, No.1, pp. 635-640 (doi:10.1016/j.jpowsour.2008.02.022

Ignjatović, N. & Uskoković, D. “Biodegradable composites based on nano-crystalline calcium phosphate and bioresorbable polymers”, Advances in Applied Ceramics, Nanoceramics special issue, vol. 107, no. 3, pp. 142-147 (DOI: 10.1179/174367608X263421).

Ivetić, T., Nikolić, M.V, Paraskevopoulos, K.M, Pavlidou, E., Zorba, T.T, Nikolić, P.M. & Ristić, M.M. 2008, "Combined FTIR and SEM-EDS Study of Bi2O3 Doped ZnO-SnO2 Ceramics", Journal of Microscopy,vol. 232, issue 3, pp. 498-503 (doi: 10.1111/j.1365-2818.2008.02147.x).

Ivetić, T., Vuković, Z., Nikolić, M.V., Pavlović, V.B., Nikolić, J.R., Minić, D. & Ristić, M.M. 2008, "Morphology investigation of mechanically activated ZnO-SnO2 system", Ceramics International, vol. 34, no. 3, pp. 639-643 (doi:10.1016/j.ceramint.2007.01.003).

Janićijević, J., Najman, S., Ignjatović, N., Savić, V. P., Kocić, J. S., Vasiljević, P., Vukelić, M. Đ., Uskoković, D. 2008, "Nanomaterial N-CP/DLPLG as potentional tissue graft in osteoreparation in combination with bone marrow cells on subcutaneous implantation model", vol. 62, no. 3, pp. 205-210 (https://doi.org/10.2298/HEMIND0803205J).

Jevtić, M. Mitrić, M., Škapin, S., Jančar, B., Ignjatović, N. & Uskoković, D. 2008, “Crystal structure of hydroxyapatite nano-rods synthesized by sonochemical homogenous precipitation", Crystal Growth and Design, vol. 8, no. 7, 2217-2222 (http://dx.doi.org/10.1021/cg7007304).

Jovalekić, C., Zdujić, M., Poleti, D., Karanović, L. & Mitrić, M. 2008, "Structural and electrical properties of the 2Bi2O3·3ZrO2 system", Journal of Solid State Chemistry, vol. 181, no. 6, pp. 1321-1329 (doi:10.1016/j.jssc.2008.02.038).

Jovanović, I., Jordović, B., Petković, M., Ignjatović, N. & Uskoković, D. 2008, "Preparation of smallest microparticles of poly-D,L-lactide by modified precipitation method: Influence of the process parameters", Microscopy Research and Technique, vol. 71, no. 2, pp. 86-92 (DOI: 10.1002/jemt.20529).

Jugovic, D., Mitric, M., Cvjeticanin, N., Jancar, B., Mentus, S. & Uskokovic, D. 2008, “Synthesis and characterization of LiFePO4/C composite obtained by sonochemical method”, Solid State Ionics, Vol 179, pp. 415-419 (doi:10.1016/j.ssi.2008.03.014)

Kamanina, N.V., Uskokovic & D.P. 2008, “Refractive Indices of Organic Systems Doped with Nanoobjects”, Materials and Manufacturing Processes, Vol. 23, No. 6, pp. 552-556 (doi:10.1080/10426910802157722).

Krstajić, N.V., Jović, V.D., Gajić-Krstajić, L., Jović, B.M., Antozzi, A.L. & Martelli, G.N. 2008, "Electrodeposition of Ni-Mo alloy coatings and their characterization as cathodes for hydrogen evolution in sodium hydroxide solution", International Journal of Hydrogen Energy, vol. 33, no. 14, pp. 3676-3687 (doi:10.1016/j.ijhydene.2008.04.039).

Kusigerski, V., Marković, D., Spasojević, V., Cvjetićanin, N., Mitrić, M., Jugović, D. & Uskoković, D. 2008, "Ground-state magnetism of chromium-substituted LiMn2O4 spinel", Journal of Magnetism and Magnetic Materials, vol. 320, no. 6, pp. 943-949 (doi:10.1016/j.jmmm.2007.09.011)

Labus, N., Stevanovic, S. & Ristic, M.M. 2008, "Sintering of mechanically activated Zno-TiO2 powders", Powder Metallurgy and Metal Ceramics, vol. 47, no. 1-2, pp. 40-46.

Marinkovic, B.A., Mancic, L., Jardim, P.M., Milosevic O. & Rizzo, F. (2008) Hydrothermal synthesis of NaxFexTi2-xO4 from natural ilmenite sand: A CaFe2O4 structure type compound, Solid State Communications, Vol. 145, No. 7-8, pp. 346-350 (doi:10.1016/j.ssc.2007.12.006)

Marković, S., Mitrić, M., Starcević, G. & Uskoković, D. 2008, "Ultrasonic de-agglomeration of barium titanate powder", Ultrasonics Sonochemistry, vol. 15, no. 1, pp. 16-20 (DOI:10.1016/j.ultsonch.2007.07.008).

Martin, M.I., Rabanal, M.E., Gomez, L.S., Torralba, J.M. & Milosevic, O. 2008, "Microstructural and morphological analysis of nanostructured alumina particles synthesized at low temperature via aerosol route", Journal of the European Ceramic Society, vol. 28, issue 13, pp. 2487-2494, (doi:10.1016/j.jeurceramsoc.2008.03.019).

Nikolić, M.V., Obradović, N., Paraskevopoulos, K., Zorba, T.T., Savić, S.M. & Ristić, M.M. 2008, "Far infrared reflectance of sintered Zn2TiO4", Journal of Materials Science, vol. 43, no. 16, pp. 5564-5568 (doi: 10.1007/s10853-008-2819-3).

Nikolić, M.V., Satoh, K., Ivetić, T., Paraskevopoulos, K.M., Zorba, T.T., Blagojević, V., Mančić, L., & Nikolić, P.M. 2008, "Infrared reflection spectroscopy of Zn2SnO4 thin films deposited on silica substrate by radio frequency magnetron sputtering", Thin Solid Films, vol. 516, no. 18, pp. 6293-6299 (doi:10.1016/j.tsf.2007.12.118).

Nikolic, P.M., Lukovic, D., Koenig, W., Nikolic, M.V., Blagojevic, V., Vujatovic, S.S., Savic, S. & Stamenovic, B. 2008, "Far infrared properties of iron doped single crystal PbTe", Journal of Optoelectronics and Advanced Materials, vol. 10, no. 1, pp. 145-148.

Nikolić, P.M., Luković, D.T., Nikolić, M.V., Djurić, S., Savić, S.M., Milovanović, A.M., Dukić, S.R. & Stamenović, B. 2008, "Photoacoustic characterization of natural mineral pyrite (FeS2)", European Physical Journal: Special Topics, vol. 153, no. 1, pp. 187-189.

Nikolić, P.M., Luković, D.T., Savić, S.M., Milovanović A.M., Dukić, S.R., Nikolić, M.V. & Stamenović, B. 2008, "Thermal diffusivity of sintered 12CaO×7AI2O3", European Physical Journal: Special Topics, vol. 153, no. 1, pp. 183-186.

Nikolic, P.M., Lukovic, D., Vujatovic, S.S., Paraskevopoulos, K.M., Nikolic, M.V., Blagojevic, V., Zorba, T.T., Stamenovic, B. & Koenig, W. 2008, "Far infrared reflectivity spectra of lead-telluride doped with Ytterbium", Journal of Alloys and Compounds, vol. 466, no. 1-2, pp. 319-322 (doi:10.1016/j.jallcom.2006.06.066).

Nikolic, P.M., Paraskevopoulos, K.M., Vujatovic, S.S., Bojicic, A., Zorba, T.T., Nikolic, M.V., Stamenovic, B., Ivetic, T. & Blagojevic, V. 2008, "Far infrared properties of PbTe doped with Bismuth", Journal of Materials Science, vol. 43, no. 16, pp. 5516-5520.

Nikolic, P.M., Paraskevopoulos, K.M., Vujatovic, S.S., Nikolic, M.V., Bojicic, A., Zorba, T.T., Stamenovic, B., Blagojevic, V., Jovic, M., Dasic, M. & Koenig, W. 2008, "Far infrared study of local impurity modes of Gd doped PbTe", Materials Chemistry and Physics, vol. 112, no. 2, pp. 496-499 (doi:10.1016/j.matchemphys.2008.05.083).

Nikolic, P.M., Vujatovic, S.S., Golic, D.L., Labus, N.J., Paraskevopoulos, K.M., Zorbas, K.T., Nikolic, M.V., Bojicic, A., Blagojevic, V. & Koenig, W. 2008, "Far infrared spectroscopy of Pb0.85Sn0.15Te alloy doped with Ni", International Journal of Materials Research, vol. 99, no. 12, pp. 1393-1396 (DOI: 10.3139/146.101772).

Obradovic, N., Stevanovic, S. & Ristic, M.M. 2008, "Analysis of nonisothermal sintering of zinc-titanate ceramics doped with MgO", Powder Metallurgy and Metal Ceramics, vol. 47, no. 1-2, pp. 63-69.

Petrović, S., Terlecki-Baričević, A., Karanović, L., Kirilov-Stefanov, P., Zdujić, M., Dondur, V., Paneva, D., Mitov, I. & Rakić V. 2008, "LaMO3 (M = Mg, Ti, Fe) perovskite type oxides: Preparation, characterization and catalytic properties in methane deep oxidation", Applied Catalysis B: Environmental, vol. 79, no. 2, pp. 186-198 (doi:10.1016/j.apcatb.2007.10.022).

Savić, S.M., Nikolić, M.V., Aleksić, O.S., Slankamenac, M., Živanov,M. & Nikolić, P.M. 2008, "Intrinsic Resistivity of Sintered Nickel Manganite vs. Powder Activation Time and Density", Science of Sintering, vol. 40, no. 1, pp. 27-32.

Stevanović, M.M., Jordović, B. & Uskoković, D.P. 2008, “Morphological changes of poly(DI -lactide-co-glycolide) nano-particles containing ascorbic acid during in vitro degradation process”, Journal of Microscopy, vol. 232, issue 3, pp. 511-516 (doi: 10.1111/j.1365-2818.2008.02150.x).

Stevanović, M., Radulović, A., Jordović, B., Uskoković, D. 2008, "Poly(DL-lactide-co-glycolide) Nanospheres for the Sustained Release of Folic Acid", Journal Biomedical Nanotechnology, vol. 4, no. 3, pp. 349-358 (doi:10.1166/jbn.2008.021).

Validžić, I., Jokanović, V., Uskoković, D.P. & Nedeljković, J.M. 2008, "Influence of solvent on the structural and morphological properties of AgI particles prepared using ultrasonic spray pyrolysis", Materials Chemistry and Physics, vol. 107, no. 1, pp. 28-32 (DOI:10.1016/j.matchemphys.2007.06.035).

Veljković, I., Poleti, D., Zdujić, M., Karanović, Lj. & Jovalekić, Č. 2008, "Mechanochemical synthesis of nanocrystalline titanium monoxide", Materials Letters, vol. 62, no. 17-18, 2769-2771 (doi:10.1016/j.matlet.2008.01.03).

2007

Ajdukovic, Z., Ignjatovic, N., Uskokovic, D., 2007, "Substitution of osteoporotic alveolar bone by biphasic calcium phosphate/ Poly-DL-lactide-co-glycolide biomaterials", Journal of Biomaterials Applications, vol. 21, no. 3, pp. 317-328 (DOI: 10.1177/088532820707376) + Ajduković, Z., Ignjatović, N., Petrović, D. & Uskoković, D. 2007, "Erratum: Substitution of osteoporotic alveolar bone by biphasic calcium phosphate/poly-DL-lactide-co-glycolide biomaterials (Journal of Biomaterials Applications (2007) vol. 21 (3) (317-328))", Journal of Biomaterials Applications, vol. 21, no. 4, pp. 443 (DOI: 10.1177/0885328207078148).

Celikovic, A., Kandic, Lj., Zdujic, M. & Uskokovic, D. 2007, "Synthesis of ZnO and ZrO2 powders by mechanochemical processing", Materials Science Forum, 555 (Research Trends in Contemporary Materials Science), pp. 279-284.

Elezović, N.R., Babić, B.M., Krstajić, N.V., Gajić-Krstajić, L.M. & Vracar, L.M. 2007, "Specificity of the UPD of H to the structure of highly dispersed Pt on carbon support", International Journal of Hydrogen Energy, vol. 32, no. 12, pp. 1991-1998 (doi:10.1016/j.ijhydene.2006.09.042).

Gómez, L.S, Rabanal, M.E., Torralba, J.M., Mancic, L. &. Milosevic, O. 2007, "Structural and morphological study of nanoceramics prepared by spray pyrolysis", Ceramic Transactions, Vol. 198 (Characterization & Control of Interfaces for High Quality Advanced Materials), 2007, 193-197.

Ignjatovic, N., Ninkov, P., Ajdukovic, Z., Vasiljevic-Radovic, D. & Uskokovic, D. 2007, "Biphasic calcium phosphate coated with poly-d,l-lactide-co-glycolide biomaterial as a bone substitute", Journal of the European Ceramic Society, vol. 27, no. 2-3, pp. 1589-1594 (DOI:10.1016/j.jeurceramsoc.2006.04.104).

Ignjatović, N.L., Liu, C.Z., Czernuszka, J.T. & Uskoković, D.P. 2007, "Micro- and nano-injectable composite biomaterials containing calcium phosphate coated with poly(dl-lactide-co-glycolide)", Acta Biomaterialia, vol. 3, no. 6, pp. 927-935 (DOI:10.1016/j.actbio.2007.04.001).

Ivetić, T., Nikolić, M.V., Nikolić, P.M., Blagojević, V., Đurić, S., Srećković, T. & Ristić, M.M. 2007, "Investigation of Zinc Stannate Synthesis Using Photoacoustic Spectroscopy", Science of Sintering, vol. 39, no. 2, pp. 153-160.

Ivetić, T., Nikolić, M.V., Slankamenac, M., Živanov, M., Minić, D., Nikolić, P.M. &. Ristić, M.M. 2007, "Influence of Bi2O3 on Microstructure and Electrical Properties of ZnO-SnO2 Ceramics", Science of Sintering, Vol. 39, No. 3, pp. 229-240.

Jevtic, M. & Uskokovic, D. 2007, "Influence of urea as a homogeneous precipitation agent on sonochemical hydroxyapatite synthesis", Materials Science Forum, Vol. 555 (Research Trends in Contemporary Materials Science), pp. 285-290.

Jovanovic, I., Stevanovic, M., Nedeljkovic, B. & Ignjatovic, N. 2007, "The effect of processing parameters on characteristics of poly-l-lactide microspheres", Materials Science Forum, Vol. 555 (Research Trends in Contemporary Materials Science), pp. 453-458.

Jugović, D., Cvjetićanin, N., Kusigerski, V., Mitrić, M., Miljković, M., Makovec, D. & Uskoković, D. 2007, "Structural and magnetic characterization of LiMn1.825Cr0.175O4 spinel obtained by ultrasonic spray pyrolysis", Materials Research Bulletin, vol. 42, no. 3, pp. 515-522 doi:10.1016/j.materresbull.2006.06.018.

Jugovic, D., Cvjeticanin, N., Mitric, M. & Mentus, S. 2007, "Comparison between different LiFePO4 synthesis routes", Materials Science Forum, Vol. 555 (Research Trends in Contemporary Materials Science), pp. 225-230.

Kandic, Lj., Marinkovic, K., Mancic, L., del Rosario, G. & Milosevic, O. 2007, "Low temperature aerosol synthesis of YAG:Ce3+ nanostructures: comparative study of the XRPD micro structural parameters", Materials Science Forum, Vol. 555 (Research Trends in Contemporary Materials Science), pp. 395-400.

Luković, D., Nikolić, P.M., Vujatović, S., Savić, S. & Urošević, D. 2007, "Photoacoustic properties of single crystal PbTe(Ni)", Science of Sintering, vol. 39, no. 2, pp. 161-167. (doi:10.2298/SOS0702161L)

Mancić, L., Del Rosario, G., Stanojević, Z.V.M. & Milosević, O. 2007, "Phase evolution in Ce-doped yttrium-aluminum-based particles derived from aerosol", Journal of the European Ceramic Society, vol. 27, no. 13-15, pp. 4329-4332 (doi:10.1016/j.jeurceramsoc.2007.02.153).

Markovic, J.P., Jugovic, D., Mitric, M., Makovec, D., Milonjic, S.K. & Uskokovic, D.P. 2007, "Nanostructured ZrO2 powder synthesized by ultrasonic spray pyrolysis", Surface Review and Letters, vol. 14, no. 5, pp. 915-919 (DOI: 10.1142/S0218625X07010524).

Marković, S., Mitrić, M., Cvjetićanin, N. & Uskoković, D. 2007, "Preparation and properties of BaTi1-xSnxO3 multilayered ceramics", Journal of the European Ceramic Society, vol. 27, no. 2-3, pp. 505-509 (DOI:10.1016/j.jeurceramsoc.2006.04.066).

Markovic, S., Mitric, M., Jovalekic, C. & Miljkovic, M. 2007, "Dielectric and ferroelectric properties of BaTi1-xSnxO3 multilayered ceramics", Materials Science Forum, 555 (Research Trends in Contemporary Materials Science), pp. 249-254.

Miličević, D., Trifunović, S., Ignjatović, N. & Suljovrujić, E. 2007, "The Influence of Gamma Radiation on the Glass Transition of Hydroxyapatite/Poly-L-Lactide Composite”, Materials Science Forum, vol. 555 (Research Trends in Contemporary Materials Science), pp. 497-502.

Milosevic, O.B., Mancic, L.T., Rabanal, M.E., Gomez, L. &Torralba, J.M. 2007, "Nanoscale particle processing through aerosol routes", Ceramic Transactions, vol. 198 (Characterization and Control of Interfaces for High Quality Advanced Materials II), pp. 347-352.

Nikolić, M.V., Blagojević, V., Paraskevopoulos, K.M., Zorba, T.T., Vasiljević-Radović, D., Nikolić, P.M. & Ristić, M.M. 2007, "Far infrared properties of sintered NiO", Journal of the European Ceramic Society, vol. 27, no. 2-3, pp. 469-474 (doi:10.1016/j.jeurceramsoc.2006.04.065).

Nikolić, M.V., Ivetić, T., Paraskevopoulos, K.M., Zorbas, K.T., Blagojević, V. & Vasiljević-Radović, D. 2007, "Far infrared reflection spectroscopy of Zn2SnO4 ceramics obtained by sintering mechanically activated ZnO-SnO2 powder mixtures", Journal of the European Ceramic Society, vol. 27, no. 13-15, pp. 3727-3730 (doi:10.1016/j.jeurceramsoc.2007.02.040).

Nikolić, M.V., Ivetić, T., Young, D.L., Paraskevopoulos, K.M., Zorba, T.T., Blagojević, V., Nikolić, P.M., Vasiljević-Radović, D. & Ristić, M.M. 2007, "Far infrared properties of bulk sintered and thin film Zn2SnO4", Materials Science and Engineering B: Solid-State Materials for Advanced Technology, vol. 138, no. 1, pp. 7-11 (doi:10.1016/j.mseb.2006.12.005).

Nikolić, M.V., Paraskevopoulos, K.M., Aleksić, O.S., Zorba, T.T., Savić, S.M., Blagojević, V.D., Luković, D.T. & Nikolić, P.M. 2007, "Far infrared reflectance of sintered nickel manganite samples for negative temperature coefficient thermistors", Materials Research Bulletin, vol. 42, no. 8, pp. 1492-1498 (doi:10.1016/j.materresbull.2006.11.005).

Nikolić, P.M., Đurić, S., Paraskevopoulos, K.M., Zorba, T.T., Luković, D., Savić, S., Blagojević, V. & Nikolić, M.V. 2007, "Infrared reflectance of single-crystal jarandolite, CaB3O4(OH)3", Mineralogical Magazine, vol. 71, No. 3, pp. 273-283.

Nikolić, P.M., König, W., Vujatović, S.S., Blagojević, V., Luković, D., Savić, S., Radulović, K., Urosević, D. & Nikolić, M.V. 2007, "Far infrared properties of PbTe doped with cerium", Journal of Alloys and Compounds, vol. 433, no. 1-2, pp. 292-295 (doi:10.1016/j.jallcom.2006.06.066).

Nikolić, P.M., Paraskevopoulos, K.M., Zorba, T.T., Pavlidou, E., Kantiranis, N., Vujović, S.S., Aleksić, O.A., Nikolić, M.V., Ivetić, T., Savić, S., Labus, N. & Blagojević, V. 2007, "Far Infrared Properties of Sintered PbTe Doped with Boron", Science of Sintering, Vol. 39, No. 3, pp. 223-228.

Nikolic, P.M., Vujatovic, S.S., Paraskevopoulos, K.M., Zorbas, K.T., Savic, S.M., Nikolic, M.V., Aleksic, O.S. & Ristic, M.M. 2007, "Effect of ageing on optical and thermal properties of YBa 2Cu3O7", International Journal of Materials Research, vol. 98, no. 7, pp. 569-573 (DOI: 10.3139/146.101511).

Obradović, N., Labus, N., Srećković, T. & Stevanović, S. 2007, “Reaction sintering of 2ZnO-TiO2”, Science of Sintering, Vol. 39, pp. 127-132 (doi:10.2298/SOS0702127O).

Obradovic, N., Stevanovic, S., Mitric, M., Nikolic, M.V. & Ristic, M.M. 2007, "Analysis of isothermal sintering of zinc-titanate doped with MgO", Science of Sintering, Vol. 39, No. 3, pp. 241-248 (doi: 10.2298/SOS0703241O).

Obradovic, R. Kesic, Lj., Mihailovic, D., Ignjatovic, N. & Uskokovic, D. 2007, “Comparative Efficacy Analysis of Biomaterials and Soft Lasers in repair of Bone Defects”, Journal of Oral Laser Applications, vol. 7, no. 3, pp. 161-166.

Pavlović, V.P., Nikolić, M.V., Nikolić, Z., Branković, G., Zivković, L., Pavlović, V.B. & Ristić, M.M. 2007, "Microstructural evolution and electric properties of mechanically activated BaTiO3 ceramics", Journal of the European Ceramic Society, vol. 27, no. 2-3, pp. 575-579 (doi:10.1016/j.jeurceramsoc.2006.04.074).

Petrović, V.V., Maričić, A., Labus, N. & Ristić, M.M. 2007, "Influence of Mechananical activation on synthesis on the properties of the  MgO-TiO2 System", Science of Sintering, Vol.39, No.1, pp. 59-65 (DOI: 10.2298/SOS0701059P)

Rabanal, M.E., Gomez, L., Khalifa, A., Mancic, L., Milosevic, O. & Torralba, J.M. 2007, "Gd2O3:Eu system: structural study of the influence of luminescence center concentration, Materials Science Forum, vol. 534-536, pp. 1393-1396.

Rabanal, M.E., Gomez, L.S., Khalifa, A., Torralba, J.M., Mancic, L. & Milosevic, O. 2007, "Structural properties of europia-doped-gadolinia synthesized through aerosol", Journal of the European Ceramic Society, vol. 27, no. 13-15, pp. 4325-4328 (doi:10.1016/j.jeurceramsoc.2007.02.151

Stevanovic, M., Ignjatovic, N., Jordovic, B. & Uskokovic, D. 2007, "Stereological analysis of the poly-(DL-lactide-co-glycolide) submicron sphere prepared by solvent/non-solvent chemical methods and centrifugal processing", Journal of Materials Science: Materials in Medicine, vol. 18, no. 7, pp. 1339-1344 (doi:10.1007/s10856-007-0156-8).

Stevanovic, M., Jordovic, B., Nedic, Z. & Milicevic, D. 2007, "The stabilizer influence on morphological characteristics of poly-(DL-lactide-co-glycolide) nanospheres", Materials Science Forum, Vol. 555 (Research Trends in Contemporary Materials Science), pp. 447-452.

Stevanović, M., Savić, J., Jordović, B. & Uskoković, D. 2007, "Fabrication, in vitro degradation and the release behaviours of poly(dl-lactide-co-glycolide) nanospheres containing ascorbic acid", Colloids and Surfaces B: Biointerfaces, vol. 59, no. 2, pp. 215-223, (doi:10.1016/j.colsurfb.2007.05.011).

Stevanović, M.M., Jordović, B. & Uskoković, D.P. 2007, "Preparation and characterization of poly(D,L-lactide-co-glycolide) nanoparticles containing ascorbic acid", Journal of Biomedicine and Biotechnology, vol. 2007, Article ID 84965, 8 pages, doi:10.1155/2007/84965.

Stevanovic, S., Zeljkovic, V., Obradovic, N. & Labus, N. 2007, "Investigation of sintering kinetics of ZnO by observing reduction of the specific surface area", Science of Sintering, Vol. 39, No. 3, pp. 259-265 (doi: 10.2298/SOS0703259S).

Suljovrujić, E., Ignjatović, N., Uskoković, D., Mitrić, M., Mitrović, M. & Tomić, S. 2007, "Radiation-induced degradation of hydroxyapatite/poly L-lactide composite biomaterial", Radiation Physics and Chemistry, vol. 76, no. 4, pp. 722-728 (DOI:10.1016/j.radphyschem.2006.02.013).

Uskokovic, P.S., Tang, C.Y., Tsui, C.P., Ignjatovic, N. & Uskokovic, D.P. 2007, "Micromechanical properties of a hydroxyapatite/poly-l-lactide biocomposite using nanoindentation and modulus mapping", Journal of the European Ceramic Society, vol. 27, no. 2-3, pp. 1559-1564 (DOI:10.1016/j.jeurceramsoc.2006.04.122).

Validzić, I.L., Jokanović, V., Uskoković, D.P. & Nedeljković, J.M. 2007, "Formation of silver iodide particles from thermodynamically stable clusters using ultrasonic spray pyrolysis", Journal of the European Ceramic Society, vol. 27, no. 2-3, pp. 927-929 (DOI:10.1016/j.matchemphys.2007.06.03).

Vlasova, M., Leon, I., Méndez, Y.E., Dominguez-Patino, G., Kakazey, M., Dominguez-Patino, M., Nikolic, M.V. & Ristic, M.M. 2007, "Monitoring of transformations in bentonite after NaOH-TMA treatment", Ceramics International, vol. 33, no. 3, pp. 405-412 (doi: 10.1016/j.ceramint.2005.09.024)

2006

Aleksić, O.S., Savić, S.M., Luković, M.D., Radulović, K.T. & Lukić, L.S. 2006, "Segmented thermistors printed by NTC nanometric paste and applied in volume air-flow sensors", Materials Science Forum, 518 (Recent Developments in Advanced Materials and Processes), pp. 247-252.

Balać, I., Tang, C.Y., Tsui, C.P., Chen, D., Uskoković, P., Ignjatović, N. & Uskoković, D. 2006, "Nanoindentation of in situ polymers in hydroxyapatite/poly-l-lactide biocomposites",Materials Science Forum, 518 (Recent Developments in Advanced Materials and Processes), pp. 501-506.

Gajic-Krstajic, Lj.M., Trisovic, T.Lj., Babic, B.M. & Vracar, Lj.M. 2006, "Oxygen reduction on carbon cryogel-supported Pt nanoparticles in acid media", Materials Science Forum, 518 (Recent Developments in Advanced Materials and Processes), pp. 289-294.

Grgur, B.N., Gvozdenović, M.M., Stevanović, J.S., Jugović, B.Z. & Trisović, L.T. 2006, "Electrochemical oxidation of iodide in aqueous solution", Chemical Engineering Journal, vol. 124, no. 1-3, pp. 47-54 (doi:10.1016/j.cej.2006.08.028).

Grgur, B.N., Zugić, D.L., Gvozdenović, M.M. & Trisović, T.L. 2006, "A kinetic study of d-glucose oxidation by bromine in aqueous solutions", Carbohydrate Research, vol. 341, no. 11, pp. 1779-1787 (doi:10.1016/j.carres.2006.04.035).

Ignjatović, N., Ninkov, P., Kojić, V., Bokurov, M., Srdić, V., Krnojelac, D., Selaković, S. & Uskoković, D. 2006, "Cytotoxicity and fibroblast properties during in vitro test of biphasic calcium phosphate/poly-dl-lactide-co-glycolide biocomposites and different phosphate materials", Microscopy Research and Technique, vol. 69, no. 12, pp. 976-982 (doi: 10.1002/jemt.20374).

Ivetic, T., Nikolic, M. V., Young, D. L., Vasiljevic-Radovic, D. & Urosevic, D. 2006, "Photoacoustic and optical properties of zinc-stannate thin films", Materials Science Forum, Vol. 518 (Recent Developments in Advanced Materials and Processes), pp. 465-470.

Jokanovic, V. 2006, "Structures and substructures in spray pyrolysis process: nanodesigning", Surfactant Science Series, Vol. 130 (Finely Dispersed Particles), pp. 513-533.

Jugović, B.Z., Trisović, T.L., Stevanović, J., Maksimović, M. & Grgur, B.N. 2006, "Novel electrolyte for zinc-polyaniline batteries", Journal of Power Sources, vol. 160, no. 2 SPEC. ISS., pp. 1447-1450 (doi:10.1016/j.jpowsour.2006.02.096).

Jugović, B.Z., Trisović, T.L., Stevanović, J.S., Maksimović, M.D. & Grgur, B.N. 2006, "Comparative studies of chloride and chloride/citrate based electrolytes for zinc-polyaniline batteries", Electrochimica Acta, vol. 51, no. 28, pp. 6268-6274 (doi:10.1016/j.electacta.2006.04.009).

Kandic, Lj., Mitrić, M. & Ignjatović, N. 2006, "XRD analysis of calcium phosphate and biocomposite calcium phosphate/bioresorbable polymer", Materials Science Forum, vol. 518 (Recent Developments in Advanced Materials and Processes) pp. 507-512.

Koruga, D., Tomić, A., Ratkaj, Z. & Matija, L. 2006, "Classical and quantum information channels in protein chain", Materials Science Forum, 518 (Recent Developments in Advanced Materials and Processes), pp. 491-.

Luković, D., König, W., Blagojević, V., Jaksić, O. & Nikolić, P.M. 2006, "Far infrared spectroscopy of PbTe doped with Ni", Materials Research Bulletin, vol. 41, no. 2, pp. 367-375 (doi:10.1016/j.materresbull.2005.08.009).

Mancic, L., del Rosario, G., Marinkovic, Z. & Milosevic, O. 2006, "Detailed structural characterisation of phosphor YAG:Ce3+ particles obtained via spray pyrolysis", Materials Science Forum, 518 (Recent Developments in Advanced Materials and Processes), pp. 107-112.

Marinović, V., Stevanović, J., Jugović, B. & Maksimović, M. 2006, "Hydrogen evolution on Ni/WC composite coatings", Journal of Applied Electrochemistry, vol. 36, no. 9, pp. 1005-1009 (doi:10.1007/s10800-006-9168-1).

Marković, S., Dondur, V., Dimitrijević, R. & Macura, S. 2006, "Thermally induced rings formation in aluminosilicate structures", Journal of Thermal Analysis and Calorimetry, vol. 84, no. 1, pp. 253-258 (doi:10.1007/s10973-005-7161-2).

Markovic, S., Mitric, M., Cvjeticanin, N. & Uskokovic, D. 2006, "Structural and dielectric properties of BaTi1-xSnxO3 ceramics", Materials Science Forum, 518 (Recent Developments in Advanced Materials and Processes), pp. 241-246.

Nikčević, I., Maravić, D., Ignjatović, N., Mitrić, M., Makovec, D. & Uskoković, D. 2006, "The formation and characterization of nanocrystalline phases by mechanical milling of biphasic calcium phosphate/poly-L-lactide biocomposite", Materials Transactions, vol. 47, no. 12, pp. 2980-2986. (http://dx.doi.org/10.2320/matertrans.47.2980)

Nikolic, M.V., Pavlovic, V.P., Pavlovic, V.B., Ristic, M.M., 2006. "Analysis of early-stage sintering mechanisms of mechanically activated BaTiO3." Science of Sintering, vol. 38, pp. 239–244.(doi:10.2298/SOS0603239N)

Obradovic, N., Labus, N., Sreckovic, T. & Ristic, M. M. 2006, "The influence of tribophysical activation on Zn2TiO4 synthesis", Materials Science Forum, 518 (Recent Developments in Advanced Materials and Processes), pp. 131-136.

Pavlović V.P., Nikolić, M.V., Spasojević, V., Blanuša, J., Živković, L., Stojanović, B.D., Pavlović, V.B. & Ristić M.M. 2006, "The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics", Materials Science Forum, vol. 514-516, part 2, pp. 1566-1570.

Rabanal, M.E., Torralba, J.M., Mancic, L. & Milosevic, O. 2006, "Síntesis y Evaluación de las Propiedades de Nanopartículas de Gd2O3 Dopadas con Centros Luminiscentes de Eu mediante Spray Pirolisis", Boletin de la Sociedad Espanola de Ceramica y Vidrio, vol. 45, no. 2, pp. 103-108.

Savić, S.M., Aleksić, O.S., Nikolić, M.V., Luković, D.T., Pejović, V.Z. & Nikolić, P.M. 2006, "Thermal diffusivity and electron transport properties of NTC samples obtained by the photoacoustic method", Materials Science and Engineering B: Solid-State Materials for Advanced Technology, vol. 131, no. 1-3, pp. 216-221 (doi:10.1016/j.mseb.2006.04.035).

Savić, S.M., Aleksić, O.S., Nikolić, P.M. & Luković, D.T. 2006, "Geometrical and electrical properties of NTC polycristalline thermistors vs. changes of sintering parameters", Science of Sintering, vol. 38, no.3, pp. 223-230.

Simicić, M.V., Zdujić, M., Dimitrijević, R., Nikolić-Bujanović, L.& N. H. 2006, "Hydrogen absorption and electrochemical properties of Mg2Ni-type alloys synthesized by mechanical alloying", Journal of Power Sources, vol. 158, no. 1, pp. 730-734 (doi:10.1016/j.jpowsour.2005.09.030).

Spasojević, V., Dramićanin, M., Jokanović, V., Andrić, Z., Blanusa, J., Kusigerski, V., Mitrić, M., Tadić, M. & Kapicić, A. 2006, "Magnetic properties of nanostructured SiO2: Eu3+ powders", Journal of the Serbian Chemical Society, vol. 71, no. 4, pp. 413-420.

Stojković, I., Hosseinmardi, A., Jugović, D., Mitrić, M. & Cvjetićanin, N. 2006, "Rapid synthesis of LiCr0.15Mn1.85O4 by glycine-nitrate method", Solid State Ionics, vol. 177, no. 9-10, pp. 847-850 (doi:10.1016/j.ssi.2006.02.013).

Uskokovic, D. & Jokanovic, V. 2006, "Molecular designing of fine particles using aerosol synthesis", Ceramic Transactions 174, pp. 3-14.

Vlasova, M., Leon, A.I., Dominguez-Patino, G., Kakazey, M., Dominguez-Patino, M., Méndez, Y.E., Nikolic, M.V. & Ristic, M.M. 2006, "Structural-phase transformations in bentonite after NaOH-BaCl2 treatment in conditions of water deficiency", Silicates Industriels, vol. 71, no. 3-4, pp. 39-47.

Wang, Y., Milosevic, O., Gomez, L., Rabanal, M.E., Torralba, J.M., Yang, B. & Townsend, P.D. 2006, "Thermoluminescence responses from europium doped gadolinium oxide", Journal of Physics Condensed Matter, vol. 18, no. 40, pp. 9257-9272 (doi: 10.1088/0953-8984/18/40/011).

Zdujić, M., Poleti, D., Jovalekić, C. & Karanović, L. 2006, "The evolution of structure induced by intensive milling in the system 2Bi2O3 · 3TiO2", Journal of Non-Crystalline Solids, vol. 352, no. 28-29, pp. 3058-3068 (doi:10.1016/j.jnoncrysol.2006.03.072).

Zorba, T., Pavlidou, E., Stanojlovic, M., Bikiaris, D., Paraskevopoulos, K.M., Nikolic, V. & Nikolic, P.M. 2006, "Technique and palette of XIIIth century painting in the monastery of Mileseva", Applied Physics A: Materials Science and Processing, vol. 83, no. 4, pp. 719-725.

2005

Ajduković, Z., Najman, S., Dordević, L., Savić, V., Mihailović, D., Petrović, D., Ignjatović, N. & Uskoković, D. 2005, "Repair of bone tissue affected by osteoporosis with hydroxyapatite-poly-L-lactide (HAp-PLLA) with and without blood plasma", Journal of Biomaterials Applications, vol. 20, no. 2, pp. 179-190 (DOI: 10.1177/0885328205050519).

Aleksic, O.A., Nikolic, P.M., Lukovic, D., Savic, S., Vasiljevic-Radovic, D., Radulovic, K., Lukic, L., Bojicic, A. & Urosevic, D. 2005, "Investigation of the thermal diffusivity of thick film NTC layers obtained with the photoacoustic method", Journal De Physique. IV : JP 125, pp. 431-433 (DOI: 10.1051/jp4:2005125101).

Djinovic, V.M., Mancic, L.T., Bogdanovic, G.A., Vulic, P.J., del Rosario, G., Sabo, T.J. & Milosevic, O.B. 2005, "Aerosol synthesis of pure and Pt-doped ZnO particles using nitrate and pdda-Pt(IV) complex solutions", Journal of Materials Research, vol. 20, no. 1, pp. 102-113. (http://dx.doi.org/10.1557/JMR.2005.0006)

Ignjatovic, N., Ajdukovic, Z. & Uskokovic, D. 2005, "New biocomposite [biphasic calcium phosphate/poly-DL-lactide-co-glycolide/ biostimulative agent] filler for reconstruction of bone tissue changed by osteoporosis", Journal of Materials Science: Materials in Medicine, vol. 16, no. 7, pp. 621-626 (doi:10.1007/s10856-005-2532-6).

Ignjatović, N., Ninkov, P., Ajduković, Z., Konstantinović, V. & Uskoković, D. 2005, "Biphasic calcium phosphate/poly-(DL-lactide-co-glycolide) biocomposite as filler and blocks for reparation of bone tissue", Materials Science Forum 494, pp. 519-524

Janković, B., Adnadević, B. & Jovanović, J. 2005, "Non-isothermal kinetics of dehydration of equilibrium swollen poly(acrylic acid) hydrogel", Journal of Thermal Analysis and Calorimetry, vol. 82, no. 1, pp. 7-13 (doi:10.1007/s10973-005-0885-1).

Janković, B., Adnadević B., Jovanović, J., Minić, D. & Kolar-Anić, L. 2005, "Thermogravimetric analysis of superabsorbing polyacrylic hydrogel", Materials Science Forum, vol. 494, pp. 193-198.

Jokanovic, V. & Uskokovic, D. 2005, "Calcium hydroxyapatite thin films on titanium substrates prepared by ultrasonic spray pyrolysis", Materials Transactions, vol. 46, no. 2, pp. 228-235 (doi:10.2320/matertrans.46.228).

Karan, B. 2005, "Robust position-force control of robot manipulator in contact with linear dynamic environment", Robotica, vol. 23, no. 6, pp. 799-803.

Koruga, D., Nikolić, A., Mihajlović, S. & Matija, L. 2005, "Nanomagnetic behavior of fullerene thin films in earth magnetic field in dark and under polarization light influences", Journal of Nanoscience and Nanotechnology, vol. 5, no. 10, pp. 1660-1664 (DOI:10.1166/jnn.2005.185).

Labus, N., Obradović, N., Srećković, T., Mitić, V. & Ristić, M.M. 2005, "Influence of mechanical activation on synthesis of zinc metatitanate", Science of Sintering, vol. 37, no. 2, pp. 115-122.

Mancić, L., Grgurić-Sipka, S., Djinović, V.M., Marinković, Z., Sabo, T. & Milosević, O. 2005, "Fine nanophased ZnO:Ru and ZnO:Pt powder synthesis through aerosols", Materials Science Forum, Vol. 494, pp. 149-154.

Mancic, L., Marinkovic, Z., Marinkovic, B., Jardim, P.M., Rizzo, F. & Milosevic, O. 2005, " Phase evolution in Ag :(Bi,Pb)(2)Sr2Cu3Cu3Ox composite powder", Ceramic Transactions, vol. 146 (Characterization and Control of Interfaces for High Quality Advanced Materials), pp. 443-449.

Marinkovic, B.A., Jardim, P.M., Rizzo, F., Mancic, L. & Milosevic, O. 2005, "Characterization and phase transitions of (Bi,Pb)2Sr 2Ca2Cu3Ox-Ag composite powder obtained by spray pyrolysis", Materials Chemistry and Physics, vol. 94, no. 2-3, pp. 233-240 (doi:10.1016/j.matchemphys.2005.04.051).

Marinković, Z.V., Mancić, L., Vulić, P. & Milosević, O. 2005, "Microstructural characterization of mechanically activated ZnO-Cr2O3 system", Journal of the European Ceramic Society, vol. 25, no. 12 SPEC. ISS., pp. 2081-2084 (doi:10.1016/j.jeurceramsoc.2005.03.085).

Marinović, V., Ristić, M. & Dostanić, M. 2005, "Dynamic adsorption of trinitrotoluene on granular activated carbon", Journal of Hazardous Materials, vol. 117, no. 2-3, pp. 121-128 (doi:10.1016/j.jhazmat.2004.07.025).

Matija, L., Jovanović, J., Adnadjević, B. & Koruga, D. 2005, "Kinetics of interaction between fullerol C60(OH)24 and polyacrylic hydrogels", Materials Science Forum 494, pp. 555-560.

Milosevic, O., Mancic, L., Ohara, S., Del Rosario. G. & Vulic,  P. 2005, "Aerosol synthesis and phase development in Ce-doped nanophased yttrium-aluminum garnet (Y3Al5O12 : Ce)", Ceramic Transactions, vol. 146 (Characterization and Control of Interfaces for High Quality Advanced Materials), pp. 435-441.

Milosevic, O., Mancic, L., Rabanal, M.E., Torralba, J.M., Yang, B. & Townsend, P. 2005, "Structural and luminescence properties of Gd2O 3:Eu3+ and y3Al5O 12:Ce3+ phosphor particles synthesized via aerosol", Journal of the Electrochemical Society, vol. 152, no. 9, pp. G707-G713 (http://dx.doi.org/10.1149/1.1972319).

Minić, D.M., Zak, T., Schneeweiss, O., Pizurova, N. & Ristić, M.M. 2005, "Synthesis and properties of Fe-W powder", Czechoslovak Journal of Physics, vol. 55, no. 7, pp. 823-834 (doi:10.1007/s10582-005-0084-0).

Nikolić, M.V., Labus, N., Ristić, M.M. 2005, “A Phenomenological Analysis of Sintering Kinetics from Viewpint of Activated Volume” , Science of Sintering, Vol. 37, No. 1 (2005), 19-25.

Nikolić, M.V., Pavlović, V.P., Pavlović, V.B., Labus, N. & Stojanović, B. 2005, "Application of the master sintering curve theory to non-isothermal sintering of BaTiO3 ceramics", Materials Science Forum 494, pp. 417-422.

Nikolic, P.M., Lukovic, D., Savic, S., Radovic, D.V., Radulovic, K., Vujatovic, S., Lukic, L., Djuric, S., Nikolic, M.V. & Bojicic, A. 2005, "Photoacoustic determination of thermal and electron transport properties of single crystal NiO", Journal De Physique. IV : JP 125, pp. 439-442 (DOI: 10.1051/jp4:20051250103) .

Nikolic, P.M., Vasiljevic-Radovic, D., Radulovic, K.T., Bojicic, A.I., Lukovic, D., Savic, S., Blagojevic, V., Vujatovic, S., Lukic, L. & Urosevic, D. 2005, "Anisotropy in thermal and electronic properties of single crystal GaSe determined by the photoacoustic method", Journal De Physique. IV : JP 125, pp. 427-429 (DOI: 10.1051/jp4:2005125100).

Obradović, N., Labus, N., Srećković, T., Minić, D. & Ristić, M.M. 2005, "Synthesis and characterization of zinc titanate nano-crystal powders obtained by mechanical activation", Science of Sintering, vol. 37, no. 2, pp. 123-129.

Obradovic, N., Labus, N., Sreckovic, T. & Ristic, M.M. 2005, "Dilatometer investigations of reactive sintering of zinc titanate ceramics", Materials Science Forum 494, pp. 411-416.

Pavlović, V.P., Nikolić, M.V., Pavlović, V.B., Labus, N., Zivković, L. & Stojanović, B.D. 2005, "Correlation between densification rate and microstructure evolution of mechanically activated BaTiO3", Ferroelectrics, vol. 319, pp. 75-85 (DOI:10.1080/00150190590965451).

Petrović, S., Karanović, L., Stefanov, P.K., Zdujić, M. & Terlecki-Baricević, A. 2005, "Catalytic combustion of methane over Pd containing perovskite type oxides", Applied Catalysis B: Environmental, vol. 58, no. 1-2, pp. 133-141 (doi:10.1016/j.apcatb.2004.11.020).

Rabanal, M.E., Moral, C., Torralba, J.M., Mancic, L. & Milosevic, O. 2005, "Gd2O3:Eu3+ phosphor particles processed through aerosol route", Journal of the European Ceramic Society, vol. 25, no. 12 SPEC. ISS., pp. 2023-2027 (doi:10.1016/j.jeurceramsoc.2005.03.183).

Radić, M., Ignjatović, N., Nedić, Z., Mitrić, M., Milicević, D. & Uskoković, D. 2005, "Synthesis and characterization of biphasic calcium phosphate/poly-(DL- lactide-co-glycolide) biocomposite", Materials Science Forum 494, pp. 537-542.

Vasiljevic-Radovic, D., Nikolic, P.M., Radulovic, K.T., Bojicic, A.I., Lukovic, D., Savic, S., Vujatovic, S., Blagojevic, V., Lukic, L. & Urosevic, D. 2005, "Photoacoustic investigations of thermal and electronic properties of single crystal Ge doped with Cr", Journal De Physique. IV : JP 125, pp. 435-438 (DOI: 10.1051/jp4:2005125102).

Vlasova, M., Leon, I., Dominguez-Patino, G., Kakazey, N., Mendez, Y.E., Nikolic, N., Nikolic, M.V. & Ristic, M.M. 2005, "Acid activation of bentonite clay in conditions of water deficiency", Silicates Industriels, vol. 70, no. 5-6, pp. 85-91.

2004

Aleksić, O.A., Nikolić, P.M., Luković, D., Radulović, K., Vasiljevic Radović, D. & Savić, S. 2004, "Thermal diffusivity of NTC layers obtained with photoacoustic technique", Microelectronics International, vol. 21, no. 1, pp. 10-14 (http://dx.doi.org/10.1108/13565360410517120).

Aleksić, O.S., Nikolić, P.M., Luković, D., Savić, S., Pejović, V.Z. & Radojčić, B.M. 2004, "A thick film NTC thermistor air flow sensor", Proceedings of the International Conference on Microelectronics 24 I, pp. 185-188.

Balać, I., Milovančević, M., Tang, C.-Y., Uskoković, P.S. & Uskoković, D.P. 2004, "Estimation of elastic properties of a particulate polymer composite using a face-centered cubic FE model", Materials Letters, vol. 58, no. 19, pp. 2437-2441 (doi:10.1016/j.matlet.2004.02.033).

Del Rosario, G., Ohara, S., Mancic, L. & Milosevic, O. 2004, "Characterisation of YAG:Ce powders thermal treated at different temperatures", Applied Surface Science, vol. 238, no. 1-4 SPEC. ISS., pp. 469-474 (doi:10.1016/j.apsusc.2004.05.253).

Dimitrijevic, R., Dondur, V., Vulic, P., Markovic, S. & Macura, S. 2004, "Structural characterization of pure Na-nephelines synthesized by zeolite conversion route", Journal of Physics and Chemistry of Solids, vol. 65, no. 10, pp. 1623-1633 (doi:10.1016/j.jpcs.2004.03.005).

Gajić-Krstajić, L.M., Trišović, T.L. & Krstajić, N.V. 2004, "Spectrophotometric study of the anodic corrosion of Ti/RuO2 electrode in acid sulfate solution", Corrosion Science, vol. 46, no. 1, pp. 65-74 (doi:10.1016/S0010-938X(03)00111-2).

Grguric-Sipka, S., Sabo, T., Mancic L. & Milosevic, O. 2004, "Aerosol synthesis of ruthenium doped ZnO fine particles", Journal of Aerosol Science, vol. 35, Suppl. 1, pp. S183-184.

Ignjatović, N., Nastasović, A., Laninović, V., Onjia, A., Miljković, M. & Konstantinović, V. 2004, "Preparation and properties of polymeric and composite bioresorbable barrier membranes", Materials Science Forum 453-454, pp. 537-542.

Ignjatovic, N., Suljovrujic, E., Budinski-Simendic, J., Krakovsky, I. & Uskokovic, D. 2004, "Evaluation of hot-pressed hydroxyapatite/poly-L-lactide composite biomaterial characteristics", Journal of Biomedical Materials Research - Part B Applied Biomaterials, vol. 71, no. 2, pp. 284-294 (doi: 10.1002/jbm.b.30093).

Ignjatovic, N. & Uskokovic, D. 2004, "Molecular spectroscopy analysis of the substitution of bone tissue by HAp/PLLA composite biomaterial", Spectroscopy, vol. 18, no. 4, pp. 553-565.

Ignjatovic, N. & Uskokovic, D. 2004, "Synthesis and application of hydroxyapatite/polylactide composite biomaterial", Applied Surface Science, vol. 238, no. 1-4 SPEC. ISS., pp. 314-319 (doi:10.1016/j.apsusc.2004.05.227).

Ivanovic, M.R., Boskovic, I., Jokanovic, V. & Nenezic, M. 2004, "Influence of Al2O3 powders on the properties of sintered ceramics", American Ceramic Society Bulletin, vol. 83, no. 4, pp. 9301-9310.

Jokanović, V., Jokanović, B., Nedeljković, J. & Milošević, O. 2004, "Modeling of nanostructured TiO2 spheres obtained by ultrasonic spray pyrolysis", Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 249, no. 1-3, pp. 111-113 (doi:10.1016/j.colsurfa.2004.08.059).

Jokanović, V., Nikčević, I., Dačić, B. & Uskoković, D. 2004, "Synthesis of nanostructured carbonated calcium hydroxyapatite by ultrasonic spray pyrolysis", Journal of Ceramic Processing Research, vol. 5, no. 2, pp. 157-162.

Jokanović, V., Spasić, A.M. & Uskoković, D. 2004, "Designing of nanostructured hollow TiO2 spheres obtained by ultrasonic spray pyrolysis", Journal of Colloid and Interface Science, vol. 278, no. 2, pp. 342-352 (doi:10.1016/j.jcis.2004.06.008).

Jovalekić, C., Stojanović, B., Zdujić, M., Mitić, M. 2004, “The influence of mechanochemical treatment of the Bi2O3-ZrO2 system on the structural and dielectric properties of the sintered ceramics”, Journal of Materials Science: Materials in Electronics, Vol. 15, pp. 499-504 (doi:10.1023/B:JMSE.0000032583.72582.06)

Jovanovic, J., Adnadjevic, B., Kicanovic, M. & Uskokovic, D. 2004, "The influence of hydroxyapatite modification on the cross-linking of polydimethylsiloxane/HAp composites", Colloids and Surfaces B: Biointerfaces, vol. 39, no. 4, pp. 181-186 (doi:10.1016/j.colsurfb.2004.08.013).

Jovanović, J., Adnadjević, B., Ostojić, S. & Kićanović, M. 2004, "An investigation of the dehydration of superabsorbing polyacrylic hydrogels", Materials Science Forum 453-454, pp. 543-548.

Jugović, B., Stevanović, J. & Maksimović, M. 2004, "Electrochemically deposited Ni + WC composite coatings obtained under constant and pulsating current regimes", Journal of Applied Electrochemistry, vol. 34, no. 2, pp. 175-179 (doi: 10.1023/B:JACH.0000009955.53325.ad).

Jugović, D., Mitrić, M., Cvjetićanin, N., Miljković, M., Jokanović, V. & Uskoković, D. 2004, "Properties of LiMn2O4 powders obtained by ultrasonic spray pyrolysis", Materials Science Forum 453-454, pp. 387-392.

Koruga, D., Tomic, A., Ratkaj, Z. & Matija, L. 2004, "Gibbson: Peptide plane as a unique biological nanostructure", Materials Science Forum 453-454, pp. 529-536.

Mancic, L., Marinkovic, B., Vulic, P. & Milosevic, O. 2004, "Aerosol processing of fine Ag:(Bi,Pb)2223 composite particles", Physica C: Superconductivity and its Applications, vol. 408-410, no. 1-4, pp. 42-43 (doi:10.1016/j.physc.2004.02.028).

Mancic, L., Marinkovic, Z., Vulic, P. & Milosevic, O. 2004, "The synthesis-structure relationship in the ZnO-Cr2O3 system", Science of Sintering, vol. 36, no. 3, pp. 189-196.

Marinković, Z.V., Mancić, L., Cribier, J., Ohara, S., Fukui, T. & Milošević, O. 2004, "Nature of structural changes in LSM-YSZ nanocomposite material during thermal treatments", Materials Science and Engineering A, vol. 375-377, no. 1-2 SPEC. ISS., pp. 615-619 (doi:10.1016/j.msea.2003.10.270).

Marinković, Z.V., Mančić, L. & Milošević, O. 2004, "The nature of structural changes in nanocrystalline ZnO powders under linear heating conditions", Journal of the European Ceramic Society, vol. 24, no. 6, pp. 1929-1933 (doi:10.1016/S0955-2219(03)00523-5).

Marinković, Z.V., Mančić, L., Vulić, P. & Milosević, O. 2004, "The influence of mechanical activation on the stoichiometry and defect structure of a sintered ZnO-Cr2O3 system", Materials Science Forum 453-454, pp. 423-428.

Marinković, Z.V., Milosević, O., Nikolić, M.V., Kakazey, M.G., Karpec, M.V., Tomila, T.V. & Ristić, M.M. 2004, "Evolution of the microstructure of disperse ZnO powders obtained by the freeze-drying method", Materials Science and Engineering A, vol. 375-377, no. 1-2 SPEC. ISS., pp. 620-624 (doi:10.1016/j.msea.2003.10.113).

Marinovic, V. & Despic, A.R. 2004, "Cathodic hydrogen evolution from aqueous solutions of acetic acid", Elektrokhimiya, vol. 40, no. 10, pp. 1155-1160.

Marinović, V. & Despić, A.R. 2004, "Cathodic hydrogen evolution from aqueous solutions of acetic acid", Russian Journal of Electrochemistry, vol. 40, no. 10, pp. 995-999 (doi: 10.1023/B:RUEL.0000046482.60390.ec).

Marković, D., Zivojinović, V., Koković, V. & Jokanović, V. 2004, "Hydroxyapatite as a root canal system filling material: Cytotoxicity testing", Materials Science Forum 453-454, pp. 555-560.

Marković, S., Pejović, V., Mitrić, M., Cvjetićanin, N., Makovec, D. & Uskoković, D. 2004, "Screen printed BaTi1-xSnxO3 multilayer materials", Materials Science Forum 453-454, pp. 459-464

Matija, L., Koruga, D., Jovanović, J., Dobrosavljević, D. & Ignjatović, N. 2004, "In vitro and in vivo investigation of collagen - C60(OH) 24 interaction", Materials Science Forum 453-454, pp. 561-566.

Najman, S., Savic, V., Djordjevic, L., Ignjatovic, N. & Uskokovic, D. 2004, "Biological evaluation of hydroxyapatite/poly-L-lactide (HAp/PLLA) composite biomaterials with poly-L-lactide of different molecular weights intraperitoneally implanted into mice", Bio-Medical Materials and Engineering, vol. 14, no. 1, pp. 61-70.

Nikcević, I., Jokanović, V., Mitrić, M., Nedić, Z., Makovec, D. & Uskoković, D. 2004, "Mechanochemical synthesis of nanostructured fluorapatite/ fluorhydroxyapatite and carbonated fluorapatite/fluorhydroxyapatite", Journal of Solid State Chemistry, vol. 177, no. 7, pp. 2565-2574 (doi:10.1016/j.jssc.2004.03.024).

Nikolić, M.V. & Labus, N. 2004, "A phenomenological analysis of sintering kinetics of alumina", Materials Science Forum 453-454, pp. 441-446.

Nikolić, M.V., Luković, D., Savić, S., Blagojević, V. & Nikolić, P.M. 2004, “Investigation of sintering kinetics of NiO using photoacoustic spectroscopy", Science of Sintering, vol. 36, no. 3, pp. 165-170.

Nikolic, N., Marinkovic, Z. & Sreckovic, T. 2004, "The influence of grinding conditions on the mechanochemical synthesis of zinc stannate", Journal of Materials Science, vol. 39, no. 16-17, pp. 5239-5242 (doi: 10.1023/B:JMSC.0000039218.82254.a4).

Nikolić, P.M., König, W., Luković, D., Savić, S., Vujatović, S., Radulović, K. & Blagojević, V. 2004, "Far infrared characterization of samarium doped single crystal PbTe", Journal of Optoelectronics and Advanced Materials, vol. 6, no. 3, pp. 811-816.

Nikolic, P.M., Nikolic, M.V., Lukovic, D., Savic, S. & Ristic, M.M. 2004, "xid=15874@FOSCQHKPb9J19HDC9dOHa7eQb">Photoacoustic properties of sintered NiO", Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, vol. 95, no. 3, pp. 147-150.

Nikolić, Z., Stamenović, B. & Bulovan, D. 2004, "Investigation of a system for the side launching and pulling out of ships weighing up to 24000 kN", Brodogradnja, vol. 52, no. 2, pp. 118-124.

Petrović, S., Kirilov-Stefanov, P., Karanović, L., Zdujić, M. & Terlecki-Baricević, A. 2004, "Mechanochemical activation in synthesis of LaTi0.5Mg 0.5O3 Perovskite-type oxide", Materials Science Forum 453-454, pp. 417-422.

Poleti, D., Karanović, L., Zdujić, M., Jovalekić, C. & Branković, Z. 2004, "Mechanochemical synthesis of g-Bi2O3", Solid State Sciences, vol. 6, no. 3, pp. 239-245 (doi:10.1016/j.solidstatesciences.2003.12.003).

Savić, S., Luković, D., Vujatović, S., Vasiljević-Radović, D., Radulović, K. & Djurić, S. 2004, "Photoacoustic properties of single crystal NiO", Materials Science Forum 453-454, pp. 287-292

Srećkovic, T., Labus, N., Obradović, N. & Zivković, L. 2004, "Enhancing synthesis and sintering of zinc titanate using mechanical activation", Materials Science Forum 453-454, pp. 435-440

Tang, C.Y., Ignjatovic, N., Uskokovic, D.P., Uskokovic, P.S., Chan, K.C., Lo, S.C.L. & Lee, T.C. 2004, "Processing and mechanical properties of biphasic calcium-phosphate/poly-L- lactide composite biomaterials", Materials Science Forum 471-472, pp. 273-277.

Trisović, T., Gajić-Krstajić, L. & Krstajic, N. 2004, "Electrolytic hydrogenation of glucose on amalgamated zinc in sulphate solutions", Materials Science Forum 453-454, pp. 145-150.

2003

Balać, I., Uskoković, P.S., Milovancević, M., Aleksić, R. & Uskoković, D. 2003, "Finite element modeling of mechanical properties of particulate composite biomaterials", Materials Science Forum 413, pp. 257-262.

Dondur, V., Markovic, S., Dimitrijevic, R., Macura, S. & Arandjelovic, D. 2003, "Reconstructive and displacive transformations of tectosilicates. Non-stoichiometric carnegieite", Journal of Thermal Analysis and Calorimetry, vol. 72, no. 1, pp. 373-381 (doi: 10.1023/A:1023969130688).

Djordjevic, V.D. & Vukobratovic, M. 2003, "On a steady, viscous flow in two-dimensional collapsible channels", Acta Mechanica, vol. 163, no. 3-4, pp. 189-205 (doi: 10.1007/s00707-002-0977-y).

Gajić-Krstajić, L., Trisovic, T., Jović, B. & Krstajić, N.V. 2003, "The influence of the physicochemical properties on the electrochemical behaviour of thermally prepared Ti/RuO2 electrodes", Materials Science Forum 413, pp. 101-106.

Ignjatović, N., Jovanović, J., Suljovrujić, E. & Uskoković, D. 2003, "Injectable polydimethylsiloxane-hydroxyapatite composite cement", Bio-Medical Materials and Engineering, vol. 13, no. 4, pp. 401-410.

Ivetić, M., Mojović, Z. & Matija, L. 2003, "Electrical conductivity of fullerene derivatives", Materials Science Forum, vol. 413 (Contemporary Studies in Advanced Materials and Processes), pp. 49-52.

Janackovic, D., Jankovic, I., Petrovic, R., Kostic-Gvozdenovic, L., Milonjic, S. & Uskokovic, D. 2003, "Surface properties of HAP particles obtained by hydrothermal decomposition of urea and calcium-edta chelates", Key Engineering Materials, vol. 240-242, pp. 437-440.

Jovanović, J., Adnadjević, B., Suljovrujić, E., Ignjatović, N. & Uskoković, D. 2003, "Influence of the HAp ratio on the thermodynamic and kinetic parameters of PDMS/HAp composites cross-linking", Materials Science Forum 413, pp. 263-268.

Jović, V.D. & Jović, B.M. 2003, "EIS and differential capacitance measurements onto single crystal faces in different solutions: Part I - Ag(111) in 0.01 M NaCl", Journal of Electroanalytical Chemistry, vol. 541, pp. 1-11 (doi:10.1016/S0022-0728(02)01309-8).

Jović, V.D. & Jović, B.M. 2003, "EIS and differential capacitance measurements onto single crystal faces in different solutions: Part II - Cu(111) and Cu(100) in 0.1 M NaOH", Journal of Electroanalytical Chemistry, vol. 541, pp. 13-21 (doi:10.1016/S0022-0728(02)01310-4).

Jugović, D., Cvjetićanin, N., Kusigerski, V. & Mentus, S. 2003, "Synthesis of LiMn2O4 by glycine-nitrate method", Journal of Optoelectronics and Advanced Materials, vol. 5, no. 1, pp. 343-346.

Mancic, L., Marinkovic, Z., Vulic, P., Moral, C. & Milosevic, O. 2003, "Morphology, structure and nonstoichiometry of ZnCr2O4 nanophased powder", Sensors, vol. 3, no. 10, pp. 415-423.

Markovic, S., Dondur, V. & Dimitrijevic, R. 2003, "FTIR spectroscopy of framework aluminosilicate structures: Carnegieite and pure sodium nepheline", Journal of Molecular Structure, vol. 654, no. 1-3, pp. 223-234 (doi:10.1016/S0022-2860(03)00249-7).

Matija, L., Avramov-Ivic, M. & Kapetanovic, V. 2003, "Different aspects of electrochemical investigations of carbon soot containing endohedral fullerenes and C60 molecules in neutral and alkaline electrolytes", Materials Science Forum, vol. 413 (Contemporary Studies in Advanced Materials and Processes), pp. 53-58.

Milosevic, O., Mancic, L., Jordovic, B., Maric, R., Ohara, S. & Fukui, T. 2003, "Processing of Gd2O3:Eu phosphor particles through aerosol route", Journal of Materials Processing Technology, vol. 143-144, no. 1, pp. 501-505 (doi:10.1016/S0924-0136(03)00305-4). 

Nikolic, P. M., Lukovic, D., Savic, S., Urosevic, D. & Djuric, S. 2003, "Thermal diffusivity of sintered 12CaO×7Al2O3", Science of Sintering, vol. 35, no. 3, pp. 147-154.

Nikolic, P. M., Radovic, D., Vasiljevic Radulovic, K., Lukovic, D., Vujatovic, S.S. & Djuric, S. 2003, "The effect of ageing on YBa2Cu3O7-x obtained by the photoacoustic method", Science of Sintering, vol. 35, no. 1, pp. 23-29.

Nikolic, Z.M., Stamenovic, B.M. & Marinkovic, M.P. 2003, "Diesel - Electric propulsion of the reconstructed paddle wheel river ship 'Krajina'", Institute of Marine Engineering, Science and Technology, IMarEST - Conference Proceedings, pp. 121-127.

Radulović, K.T., Nikolić, P.M., Vasiljević-Radović, D., Todorović, D.M., Vujatović, S.S., Bojičić, A.I., Blagojević, V. & Urošević, D. 2003, "A contribution of carrier transport processes to the photoacoustic effects in doped narrow gap semiconductors", Review of Scientific Instruments, vol. 74, no. 1 II, pp. 595-597. (https://doi.org/10.1063/1.1515891)

Sahu, P., De, M. & Zdujić, M. 2003, "Microstructural characterization of the evoluted phases of ball-milled Fe2O3 powder in air and oxygen atmosphere by Rietveld analysis", Materials Chemistry and Physics, vol. 82, no. 3, pp. 864-876 (doi:10.1016/j.matchemphys.2003.07.011).

Suljovrujić, E., Ignjatović, N. & Uskoković, D. 2003, "Gamma irradiation processing of hydroxyapatite/poly-L-lactide composite biomaterial", Radiation Physics and Chemistry, vol. 67, no. 3-4, pp. 375-379 (doi:10.1016/S0969-806X(03)00070-7).

Todorović, D.M., Nikolić, P.M., Bojičić, A., Smiljanić, M., Vasiljević-Radović, D.G. & Radulović, K.T. 2003, "Photopyropiezoelectric elastic bending method", Review of Scientific Instruments, vol. 74, no. 1 II, pp. 635-637.

Tucic, A., Marinkovic, Z.V., Mancic, L., Cilense, M. & Miloševic, O. 2003, "Pyrosol preparation and structural characterization of SnO2 thin films", Journal of Materials Processing Technology, vol. 143-144, no. 1, pp. 41-45 (doi:10.1016/S0924-0136(03)00316-9).

Uskoković, V., Ignjatović, N. & Petranović, N. 2003, "Synthesis and characterization of hydroxyapatite-collagen biocomposite materials", Materials Science Forum 413, pp. 269-274.

2002

Balać, I., Uskoković, P.S., Aleksić, R. & Uskoković, D. 2002, "Predictive modeling of the mechanical properties of particulate hydroxyapatite reinforced polymer composites", Journal of Biomedical Materials Research, vol. 63, no. 6, pp. 793-799 (doi: 10.1002/jbm.10407).

Blesic, M.D., Saponjic, Z.V., Nedeljkovic, J.M. & Uskokovic, D.P. 2002, "TiO2 films prepared by ultrasonic spray pyrolysis of nanosize precursor", Materials Letters, vol. 54, no. 4, pp. 298-302, doi:10.1016/S0167-577X(01)00581-X.

Ignjatovic, N., Suljovrujic, E., Stojanovic, Z. & Uskokovic, D. 2002, "Structure and characteristics of the hot pressed hydroxyapatite/poly-L-lactide composite", Science of Sintering, vol. 34, no. 1, pp. 79-93.

Jović, V.D. & Jović, B.M. 2002, "Surface reconstruction during the adsorption/desorption of OH- species onto Cu(111) and Cu(100) in 0.1 M NaOH solution", Journal of the Serbian Chemical Society, vol. 67, no. 7, pp. 531-546.

Nikolic, N.S., Sreckovic, T.V. & Ristic, M.M. 2002, "The influence of mechanical activation of ZnO and SnO2 powder mixtures on the obtaining of zinc stannate ceramics", Khimiya v Interesakh Ustoichivogo Razvitiya, vol.10, no.1-2, pp. 213-217.

Nikolic, P. M., Djuric, S., Radulovic, K., Vasiljevic-Radovic, D., Nikolic, M.V. & Ristic, M. M. 2002, "Characterisation of dispersive systems using a coherer", Science of Sintering, vol. 34, no. 1, pp. 101-108.

Nikolić, P.M., Radulović, K., Vasiljević-Radović, D., Blagojević, V., Milosavljević, B. & Dohcević-Mitrović, Z. 2002, "Far-infrared spectroscopy of PbTe doped with iron", Journal of the Serbian Chemical Society, vol. 67, no. 6, pp. 415-423.

Pucar, M.D. 2002, "Enhancement of ground radiation in greenhouses by reflection of direct sunlight", Renewable Energy, vol. 26, no. 4, pp. 561-586 (doi:10.1016/S0960-1481(01)00155-0).

Pucar, M.D.J. & Despic, A.R. 2002, "The enhancement of energy gain of solar collectors and photovoltaic panels by the reflection of solar beams", Energy, vol. 27, no. 3, pp. 205-223 (doi:10.1016/S0360-5442(01)00081-0).

2001

Balac, I., Uskokovic, P.S., Ignjatovic, N., Aleksic, R. & Uskokovic, D. 2001, "Stress analysis in hydroxyapatite/poly-L-lactide composite biomaterials", Computational Materials Science, vol. 20, no. 2, pp. 275-283 (doi:10.1016/S0927-0256(00)00182-8).

Ignjatović, N., Delijić, K., Vukcević, M. & Uskoković, D. 2001, "The designing of properties of hydroxyapatite/poly-l-lactide composite biomaterials by hot pressing", Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, vol. 92, no. 2, pp. 145-149.

Ignjatović, N., Delijić, K., Vukcević, M. & Uskoković, D. 2001, "Microstructure and mechanical properties of hot-pressed hydroxyapatite/poly-L-lactide biomaterials", Key Engineering Materials, vol. 192-195, pp. 737-740.

Ignjatović, N., Savić, V., Najman, S., Plavsić, M. & Uskoković, D. 2001, "A study of HAp/PLLA composite as a substitute for bone powder, using FT-IR spectroscopy", Biomaterials, vol. 22, no. 6, pp. 571-575 (doi:10.1016/S0142-9612(00)00215-5).

Janackovic, D., Petrovic-Prelevic, I., Kostic-Gvozdenovic, L., Petrovic, R., Jokanovic, V. & Uskokovivc, D. 2001, "Influence of synthesis parameters on the particle sizes of nanostructured calcium-hydroxyapatite", Key Engineering Materials, vol. 192-195, pp. 203-206.

Jović, V.D. & Jović, B.M. 2001, "Copper electrodeposition from a copper acid baths in the presence of PEG and NaCl", Journal of the Serbian Chemical Society, vol. 66, no. 11-12, pp. 935-952.

Jović, V.D. & Jović, B.M. 2001, "Underpotential deposition of cadmium onto Cu(111) and Cu(110) from chloride containing solutions", Journal of the Serbian Chemical Society, vol. 66, no. 5, pp. 345–357.

Mancic, L., Milosevic, O., Labus, N. & Ristic, M. 2001, "High TC superconducting powders synthesis from aerosol", Journal of the European Ceramic Society, vol. 21, no. 15, pp. 2765-2769 (doi:10.1016/S0955-2219(01)00360-0).

Mancić, L., Marinković, Z. & Milosević, O. 2001, "Synthesis of Bi-based superconducting powders through the freeze drying", Materials Chemistry and Physics, vol. 67, no. 1-3, pp. 288-290 (doi:10.1016/S0254-0584(00)00452-1).

Marinkovic, Z.V., Mancic, L., Maric, R. & Milosevic, O. 2001, "Preparation of nanostructured Zn-Cr-O spinel powders by ultrasonic spray pyrolysis", Journal of the European Ceramic Society, vol. 21, no. 10-11, pp. 2051-2055 (doi:10.1016/S0955-2219(01)00170-4).

Milosevic, O., Maric, R., Ohara, S.& Fukui, T. 2001, "Aerosol synthesis of phosphor particles based on Eu activated gadolinium oxide matrices, Ceramic Transactions, Vol. 112(Ceramic Processing Science VI), pp. 101-106.

Mitic, V.V. & Mitrovic, I. 2001, "The influence of Nb2O5 on BaTiO3 ceramics dielectric properties", Journal of the European Ceramic Society, vol. 21, no. 15, pp. 2693-2696 (doi:10.1016/S0955-2219(01)00347-8).

Mitrovic, I. & Mitic, V.V. 2001, "BaTiO3-ceramics electrical model based on intergranular contacts", Journal of the European Ceramic Society, vol. 21, no. 15, pp. 2771-2775 (doi:10.1016/S0955-2219(01)00361-2).

Nikolić, N., Srećković, T. & Ristić, M.M. 2001, "The influence of mechanical activation on zinc stannate spinel formation", Journal of the European Ceramic Society, vol. 21, no. 10-11, pp. 2071-2074 (doi:10.1016/S0955-2219(01)00174-1).

Nikolic, N., Mancic, L., Marinkovic, Z., Milosevic, O. & Ristic, M.M. 2001, "Preparation of fine oxide ceramic powders by freeze drying", Annales de Chimie: Science des Materiaux, vol. 26, no. 5, pp. 35-41 (doi:10.1016/S0151-9107(01)80081-7).

Nikolić, P.M., Djurić, S., Todorović, D.M., Vasiljević-Radović, D., Blagojević, V., Mihajlović, P., Elazar, J., Radulović, K.T., Bojicić, A.I. & Urosević, D. 2001, "Application of the photoacoustic method for characterization of natural galena (PbS)", Physics and Chemistry of Minerals, vol. 28, no. 1, pp. 44-51 (doi: 10.1007/s002690000121).

Nikolic, Z. & Jankovic, Z. 2001, "Electrical conductivity of sintered copper with the addition of Al2O3", Science of Sintering, vol. 33, no. 2, pp. 117-120.

Simicić, M.V., Zdujić, M., Jelovac, D.M. & Rakin, P.M. 2001, "Hydrogen storage material based on LaNi5 alloy produced by mechanical alloying", Journal of Power Sources, vol. 92, no. 1-2, pp. 250-254 (doi:10.1016/S0378-7753(00)00534-6).

Trisović, T., Gajić-Krstajić, L., Krstajić, N. & Vojnović, M. 2001, "On the kinetics of the hydrogen evolution reaction on zinc in sulfate solutions", Journal of the Serbian Chemical Society, vol. 66, no. 11-12, pp. 811-823.

Zivanovic, P., Curcic, R., Djurkovic, G., Jokanovic, V. & Uskokovic, D. 2001, "Preparation of fine tungsten powder from scheelite by self-propagating high-temperature synthesis", International Journal of Self-Propagating High-Temperature Synthesis, vol. 10, no. 1, pp. 91-97.

2000

Branković, Z., Milosević, O., Poleti, D., Karanović, L. & Uskoković, D. 2000, "ZnO varistors prepared by direct mixing of constituent phases", Materials Transactions, JIM, vol. 41, no. 9, pp. 1226-1231. (http://dx.doi.org/10.2320/matertrans1989.41.1226)

Ignjatović, N., Plavsić, M., Najman, S., Savić, V. & Uskoković, D. 2000, "Analysis of in vivo substitution of bone tissue by HAp/PLLA composite biomaterial with PLLA of different molecular weights using FTIR spectroscopy", Materials Science Forum, vol. 352 (Trends in Advanced Materials and Processes), pp. 143-150.

Ignjatovic, N., Plavsic, M. & Uskokovic, D. 2000, "Hydroxyapatite/poly-L-lactide (Collagen) biocomposite with poly-L-lactide of different molecular weights", Advanced Engineering Materials, vol. 2, no. 8, pp. 511-514.

Plavšić, M., Bugarski, B., Vunjak-Novaković, G., Uskoković, D., Goosen, M., Jovanović, G. Ignjatović, N., Tomic, S., Pajić-Lijaković, I. 2000, “Significance of molecular weight for medical purpose application of PLLA”, Hemijska industrija, vol. 54, pp. 447-457 http://www.ache.org.rs/HI/2000/no10.html

Jokanović, V., Zivanović, P., ćurcić, R., Djurković, G. & Izvonar, D. 2000, "Oxidation of metallic binder powder and its influence on mechanical properties metal-diamond composite", Materials Transactions, JIM, vol. 41, no. 4, pp. 492-498. (http://dx.doi.org/10.2320/matertrans1989.41.492)

Mancic, L., Marinkovic, B., Milosevic, O., Ristic, M.M. 2000, "Complex ceramic oxide synthesis from aerosol", British Ceramic Proceedings, vol. 61 (Novel Chemistry and Processing of Ceramics), pp. 15-21.

Mancic, L., Milosevic, O., Marinkovic, B., Da Silva Lopez, M.d.F. & Rizzo, F. 2000, "Rapid formation of high Tc phase in Bi-Pb-Sr-Ca-Cu-O system", Physica C: Superconductivity and its Applications, vol. 341-348, no. PART 1, pp. 503-504 (doi:10.1016/S0921-4534(00)00563-3).

Mancić, L., Milosević, O., Marinković, B., De Silva Lopes, M.F. & Rizzo, F. 2000, "The influence of urea on the formation process of BiPbSrCaCuO superconducting ceramics synthesized by spray pyrolysis method", Materials Science and Engineering B: Solid-State Materials for Advanced Technology, vol. 76, no. 2, pp. 127-132 (doi:10.1016/S0921-5107(00)00427-X).

Marinković, B.A., Zakula, Z., Duric, S., Nikolić, N., Milosević, O. & Ristić, M.M. 2000, "Line-profile analysis of nanostructured ZnO powders obtained by freeze-drying method", Materials Science Forum, vol. 321-324 (European Powder Diffraction 6), pp. 1068-1073.

Ristić, M., Grbavčić, Z. & Marinović, V. 2000, "Modeling boron separation from water by activated carbon, impregnated and unimpregnated", Annali di Chimica, vol. 90, no. 9-10, pp. 571-580

Vukobratović, M., Potkonjak, V. & Matijević, V. 2000, "Internal redundancy - the way to improve robot dynamics and control performances", Journal of Intelligent and Robotic Systems: Theory and Applications, vol. 27, no. 1-2, pp. 31-66 (doi:10.1023/A:1008141912804).

1999

Blagojevic, N.Z., Zejnilovic, R.M., Despić, A.R. & Blecić, Z. 1999, "Determination of the zinc and cadmium contents in low-alloyed tin", Journal of the Serbian Chemical Society, vol. 64, no. 11, pp. 707-720.

Ignjatović, N., Tomić, S., Dakić, M., Miljković, M., Plavsić, M. & Uskoković, D. 1999, "Synthesis and properties of hydroxyapatite/poly-L-lactide composite biomaterials", Biomaterials, vol. 20, no. 9, pp. 809-816, doi:10.1016/S0142-9612(98)00234-8

Ignjatovic, N.L., Plavsic, M., Miljkovic, M.S., Zivkovic, L.M. & Uskokovic, D.P. 1999, "Microstructural characteristics of calcium hydroxyapatite/poly-L-lactide based composites", Journal of Microscopy, vol. 196, no. 2, pp. 243-248 (doi:10.1046/j.1365-2818.1999.00623.x).

Janackovic, D., Orlovic, A., Skala, D., Drmanic, S., Kostic-Gvozdenovic, L., Jokanovic, V. & Uskokovic, D. 1999, "Synthesis of nanostructured mullite from xerogel and aerogel obtained by the non-hydrolytic sol-gel method", Nanostructured Materials, vol. 12, no. 1, pp. 147-150 (doi:10.1016/S0965-9773(99)00085-9).

Jokanović, V., Janaćković, D. & Uskoković, D. 1999, "Influence of aerosol formation mechanism by an ultrasonic field on particle size distribution of ceramic powders", Ultrasonics Sonochemistry, vol. 6, no. 3, pp. 157-169 (doi:10.1016/S1350-4177(99)00007-3).

Jokanovic, V., Janackovic, D., Spasic, P. & Uskokovic, D. 1999, "Modeling of nanostructural design of ultrafine mullite powder particles obtained by ultrasonic spray pyrolysis", Nanostructured Materials, vol. 12, no. 1, pp. 349-352 (doi:10.1016/S0965-9773(99)00132-4).

Jović, B.M., Drazić, D.M. & Jović, V.D. 1999, "Electrosorption of bromide ions onto silver single crystals", Journal of the Serbian Chemical Society, vol. 64, no. 1, pp. 47-53.

Jović, B.M., Drazić, D.M. & Jović, V.D. 1999, "Mechanism and kinetics of the electrosorption of sulphate anions on the (111) face of silver", Journal of the Serbian Chemical Society, vol. 64, no. 9, pp. 539-552.

Jović, V.D., Jović, B.M., Stojilković, E.R., Trisović, T. & Vojnović, M. 1999, "Investigation of the polyaniline film porosity by the electrodeposition of cadmium on the film", Journal of the Serbian Chemical Society, vol. 64, no. 4, pp. 265-273.

Nikolić, Z.M. & Bilen, B.J. 1999, "Impressed current protection of ships in fresh water", International Shipbuilding Progress, vol. 46, no. 447, pp. 277-290.

Stopić, S., Nedeljković, J., Rakocević, Z. & Uskoković, D. 1999, "Influence of additives on the properties of spherical nickel particles prepared by ultrasonic spray pyrolysis", Journal of Materials Research, vol. 14, no. 7, pp. 3059-3065. (http://dx.doi.org/10.1557/JMR.1999.0410)

Todorović, D.M., Nikolić, P.M. & Bojicić, A.I. 1999, "Photoacoustic frequency transmission technique: Electronic deformation mechanism in semiconductors", Journal of Applied Physics, vol. 85, no. 11, pp. 7716-7726.

Uskokovic, P.S., Miljkovic, M., Krivokuca, M., Putic, S.S. & Aleksic, R. 1999, "An intensity based optical fibre sensor for flexural damage detection in woven composites", Advanced Composites Letters, vol. 8, no. 2, pp. 55-58.

Zdujić, M., Jovalekić, C., Karanović, L. & Mitrić, M. 1999, "The ball milling induced transformation of Fe2O3 powder in air and oxygen atmosphere", Materials Science and Engineering A, vol. 262, no. 1-2, pp. 204-213 (doi:10.1016/S0921-5093(98)01009-0).

1998

Branković, Z., Poleti, D., Karanović, L. & Uskoković, D. 1998, "Influence of spinel phase composition on ZnO varistors properties", Materials Science Forum, vol. 282-283, pp. 225-232.

Grgur, B.N., Krstajić, N.V., Vojnović, M.V., Lačnjevac, Č. & Gajić-Krstajić, L. 1998, "The influence of polypyrrole films on the corrosion behavior of iron in acid sulfate solutions", Progress in Organic Coatings, vol. 33, no. 1, pp. 1-6 (doi:10.1016/S0300-9440(97)00112-4).

Ignjatović, N., Branković, Z., Dramićanin, M., Nedeljković, J.M. & Uskoković, D.P. 1998, "Preparation of TiO2 and ZnO thin films by dip-coating method", Materials Science Forum, vol. 282-283, pp. 147-152.

Janackovic, D., Jokanovic, V., Kostic-Gvozdenovic, L. & Uskokovic, D. 1998, "Synthesis of mullite nanostructured spherical powder by ultrasonic spray pyrolysis", Nanostructured Materials, vol. 10, no. 3, pp. 341-348 (doi:10.1016/S0965-9773(98)00074-9).

Jokanović, V., Janaćković, D., ćurcić, R., Zivanovic, P. & Uskoković, D. 1998, "Synthesis of cordierite powder performed under the conditions of periodic ultrasonic fields activity", Materials Science Forum, vol. 282-283, pp. 65-70.

Jovalekić, C., Pavlović, M., Osmokrović, P. & Atanasoska, L. 1998, "X-ray photoelectron spectroscopy study of Bi4Ti3O12 ferroelectric ceramics", Applied Physics Letters, vol. 72, no. 9, pp. 1051-1053, doi:10.1063/1.120961

Jović, B.M., Drazic, D.M. & Jović, V.D. 1998, "Mechanism and kinetics of the electrosorption of acetate anions on the (111) face of silver", Journal of the Serbian Chemical Society, vol. 63, no. 10, pp. 793-804.

Marinović, V. & Despić, A. 1998, "Phosphoric acid as a source of hydrogen in cathodic hydrogen evolution", Journal of the Serbian Chemical Society, vol. 63, no. 7, pp. 545-553.

Nedeljković, J.M., Dimitrijević, N.M., Comor, M.I., Saponjić, Z.V. & Uskoković, D.P. 1998, "Nanocomposite materials prepared by using quantum dots as building blocks", Materials Science Forum, vol. 282-283, pp. 19-26.

Saponjic, Z.V., Rakocevic, Z., Dimitrijevic, N.M., Nedeljkovic, J.M., Jokanovic, V. & Uskokovic, D.P. 1998, "Tailor made synthesis of Q-TiO2 powder by using quantum dots as building blocks", Nanostructured Materials, vol. 10, no. 3, pp. 333-339 (doi:10.1016/S0965-9773(98)00073-7).

Zdujić, M., Jovalekić, C., Karanović, L., Mitrić, M., Poleti, D. & Skala, D. 1998, "Mechanochemical treatment of alpha-Fe2O3 powder in air atmosphere", Materials Science and Engineering A, vol. 245, no. 1, pp. 109-117 (doi:10.1016/S0921-5093(97)00715-6).

Zerjal, M., Bilen, B. & Marinković, M. 1998, "Crash-stop manoeuver of pushed convoys on inland waterways", International Shipbuilding Progress, vol. 45, no. 441, pp. 51-70.

1997

Bilen, B. & Bilen-Katic, B. 1997, "Modified pusher tug design for the Danube River, International Shipbuilding Progress, vol. 44, no.438, pp. 127-144.

Janaćković, D.J., Jokanović, V., Kostić-Gvozdenović, L.J., Zec, S. & Uskoković, D. 1997, "Synthesis and formation mechanism of submicrometre spherical cordierite powders by ultrasonic spray pyrolysis", Journal of Materials Science, vol. 32, no. 1, pp. 163-16 (doi:10.1023/A:1018595720313).

Janackovic, D., Jokanovic, V., Kostic-Gvozdenovic, L., Cirjakovic, R., Petrovic-Prelevic, I. & Uskokovic, D. 1997, "Synthesis of spinel powders by the spray pyrolysis method", Key Engineering Materials, vol. 132-136, pp. 197-200.

Jokanović, V., Janaćković & Uskoković, D. 1997, "Size distribution of ultrafine spherical ceramic powders obtained by ultrasonic spray pyrolysis", Key Engineering Materials, vol. 132-136, pp. 213-216.

Krstajić, N.V., Grgur, B.N., Zdujić, M., Vojnović, M.V. & Jakšić, M.M. 1997, "Kinetic properties of the Ti-Ni intermetallic phases and alloys for hydrogen evolution", Journal of Alloys and Compounds, vol. 257, no. 1-2, pp. 245-252 (doi:10.1016/S0925-8388(97)00018-2).

Marinović, V. & Despić, A.R. 1997, "Hydrogen evolution from solutions of citric acids 1", Journal of Electroanalytical Chemistry, vol. 431, no. 1, pp. 127-132 (doi:10.1016/S0022-0728(97)00188-5).

Marinovic, V. & Despic, A.R. 1997, "Hydrogen evolution from solutions of ethylenediaminetetraacetic acid", Russian Journal of Electrochemistry, vol. 33, no. 9, pp. 965-970.

Milosević, O., Gagić, V., Vodnik, J., Mitrović, A., Karanović, L., Stojanović, B. & Zivković, L. 1997, "Synthesis and deposition of ZnO based particles by aerosol spray pyrolysis", Thin Solid Films, vol. 296, no. 1-2, pp. 44-48 (doi:10.1016/S0040-6090(96)09358-3).

Nedeljković, J.M., Saponjić, Z.V., Rakocević, Z., Jokanović, V. & Uskoković, D.P. 1997, "Ultrasonic spray pyrolysis of TiO2 nanoparticles", Nanostructured Materials, vol. 9, no. 1-8, pp. 125-128 (doi:10.1016/S0965-9773(97)00034-2).

Stanković, Z.D. & Mancić, L.T. 1997, "Synthesis and characterization of the Me-HTSC composite", Materials and Design, vol. 18, no. 4-6, pp. 395-399 (doi:10.1016/S0261-3069(97)00082-4).

Stopić, S.R., Ilić, I.B., Nedeljković, J.M., Rakocević, Z.L.J., Susić, M.V. & Uskoković, D.P. 1997, "Influence of hydrogen spillover effect on the properties of Ni particles prepared by ultrasonic spray pyrolysis", Studies in Surface Science and Catalysis, vol. 112, pp. 103-110 (doi:10.1016/S0167-2991(97)80828-2).

Stopic, S.R., Ilic, I.E. & Uskokovic, O.P. 1997, "Effect of Pd, Cu, and Ni additions on the kinetics of NiCl2 reduction by hydrogen", Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 28, no. 6, pp. 1241-1248 (doi:10.1007/s11663-997-0079-2).

Susić, M., Stopić, S., Ilić, I. & Uskoković, D. 1997, "Kinetics of hydrogen absorption by nickel powder with added palladium, copper, and nickel from nickel-chloride reduction by hydrogen", International Journal of Hydrogen Energy, vol. 22, no. 7, pp. 661-667 (doi:10.1016/S0360-3199(96)00207-8).

Todorović, D.M. & Nikolić, P.M. 1997, "Investigation of carrier transport processes in semiconductors by the photoacoustic frequency transmission method", Optical Engineering, vol. 36, no. 2, pp. 432-445. (http://dx.doi.org/10.1117/1.601215)

Todorović, D.M., Nikolić, P.M., Bojičić, A.I. & Radulović, K.T. 1997, "Thermoelastic and electronic strain contributions to the frequency transmission photoacoustic effect in semiconductors", Physical Review B - Condensed Matter and Materials Physics, vol. 55, no. 23, pp. 15631-15642 (http://dx.doi.org/10.1103/PhysRevB.55.15631)

1996

Bozic, D., Ilic, N., Mitkov, M., Jovanovic, M.T. & Zdujic, M. 1996, "A comparative study of microstructure, mechanical and fracture properties of Ni3Al-based intermetallics produced by powder metallurgy and standard melting and casting processes", Journal of Materials Science, vol. 31, no. 12, pp. 3213-3221 (http://dx.doi.org/10.1007/BF00354671).

Cerović, L.S., Milonjic, S.K., Zivkovic, L.V. & Uskokovic, D.P. 1996, "Synthesis of spherical ß-silicon carbide particles by ultrasonic spray pyrolysis", Journal of the American Ceramic Society, vol. 79, no. 8, pp. 2215-2217 (doi:10.1111/j.1151-2916.1996.tb08964.x).

Janackovic, D., Jokanovic, V., Kostic-Gvozdenovic, L. & Uskokovic, D.P. 1996, "Formation mechanism, morphology and synthesis of alpha-Al2O3, mullite and cordierite particles obtained by the ultrasonic spray pyrolysis", Materials Science Forum, vol. 214, pp. 215-222.

Janackovic, D., Jokanovic, V., Kostic-Gvozdenovic, L., Zivkovic, L. & Uskokovic, D. 1996, "Synthesis, morphology, and formation mechanism of mullite particles produced by ultrasonic spray pyrolysis", Journal of Materials Research, vol. 11, no. 7, pp. 1706-1716. ( http://dx.doi.org/10.1557/JMR.1996.0214)

Jokanovic, V., Janackovic, D., Spasic, A.M. & Uskokovic, D. 1996, "Synthesis and formation mechanism of ultrafine spherical Al2O3 powders by ultrasonic spray pyrolysis", Materials Transactions, JIM, vol. 37, no. 4, pp. 627-635. (http://dx.doi.org/10.2320/matertrans1989.37.627).

Jovanovic, M.T., Bozic, D., Ilic, N., Mitkov, M. & Zdujic, M. 1996, "Structure, properties and application of Ni3Al aluminides", Materials Science Forum, vol. 214, pp. 257-264.

Jović, B.M., Dražić, D.M. & Jović, V.D. 1996, "Determination of the parameters of the process of chloride ions adsorption on the (111) face of silver", Journal of the Serbian Chemical Society, vol. 61, no. 12, pp. 1209-1223.

Jovic, V.D., Trisovic, T., Jovic, B.M. & Vojnovic, M. 1996, "The morphology of different metals electrodeposited onto polyaniline films", Journal of Electroanalytical Chemistry, vol. 408, no. 1-2, pp. 149-155, doi:10.1016/0022-0728(96)04546-9.

Krstajic, N.V., Jovic, B.M., Jovic, V.D., Gajic-Krstajic, L., Trisovic, T. & Vojnovic, M. 1996, "Cyclic voltammetry investigations of the redox process in polyaniline films", Journal of the Serbian Chemical Society, vol. 61, no. 6, pp. 469-477.

Milosevic, O.B., Mirkovic, M.K. & Uskoković, D.P. 1996, "Characteristics and formation mechanism of BaTiO3 powders prepared by twin-fluid and ultrasonic spray-pyrolysis methods", Journal of the American Ceramic Society, vol. 79, no. 6, pp. 1720-1722, doi:10.1111/j.1151-2916.1996.tb08794.x

Nikolić, P.M., Mihajlović, P. & Todorović, D.M. 1996, "Far infrared and infrared properties of single crystal anglesite", Spectrochimica Acta - Part A Molecular Spectroscopy, vol. 52, no. 2 PART A, pp. 131-137 (doi:10.1016/0584-8539(95)01530-2).

Stopic, S., Ilic, I. & Uskokovic, D.P. 1996, "Preparation of nickel submicron powder by ultrasonic spray pyrolysis", International Journal of Powder Metallurgy (Princeton, New Jersey), vol. 32, no. 1, pp. 59-65.

Uskokovic, D.P. 1996, "Synthesis of advanced materials by powder processing", Materials Science Forum, vol. 214, pp. 189-196.

Zejnilović, R.M., Blagojević, N., Jović, V.D. & Despić, A.R. 1996, "Direct stripping voltammetric method for the determination of small concentrations of one component in binary alloys", Analytica Chimica Acta, vol. 327, no. 2, pp. 107-116 (doi:10.1016/0003-2670(96)00083-9).

1995

Jovalekic, C., Pavlovic, M., Osmokrovic, P. & Zdujic, M. 1995, "Polarization behavior of ferroelectric Bi4Ti3O12 ceramics", IEEE Transactions on Dielectrics and Electrical Insulation, vol. 2, no. 3, pp. 409-412. (http://dx.doi.org/10.1109/94.395429)

Jovalekic, C., Zdujic, M., Radakovic, A. & Mitric, M. 1995, "Mechanochemical synthesis of NiFe2O4 ferrite", Materials Letters, vol. 24, no. 6, pp. 365-368, doi:10.1016/0167-577X(95)00120-4.

Jović, B.M., Jović, V.D. & Dražić, D.M. 1995, "Kinetics of chloride ion adsorption and the mechanism of AgCl layer formation on the (111), (100) and (110) faces of silver", Journal of Electroanalytical Chemistry, vol. 399, no. 1-2, pp. 197-206. (doi:10.1016/0022-0728(95)04291-1)

Stopic, S., Ilic, I. & Uskokovic, D. 1995, "Structural and morphological transformations during NiO and Ni particles generation from chloride precursor by ultrasonic spray pyrolysis", Materials Letters, vol. 24, no. 6, pp. 369-376 (doi:10.1016/0167-577X(95)00121-2).

Vukcevic, M., Glisic, S., Zivanovic, P. & Uskokovic, D. 1995, "Shock compaction of AlMgSi0.5 spheres", Journal of Materials Science, vol. 30, no. 11, pp. 2950-2955 (doi:10.1007/BF00349668).

1994

Bilen, B., Bilen-Katic, B. & Zerjal, M. 1994, "Some naval architectural problems in underwater coal mining", Marine Technology, vol. 31, no. 2, pp. 116-122.

Bozic, D., Mitkov, M., Ilic, N., Jovanovic, M.T. & Zdujic, M. 1994, "Microstructure and mechanical properties of hot-pressed Ni3Al-based intermetallic powder produced by rotating electrode process", Materials Letters, vol. 21, no. 2, pp. 161-166 (doi:10.1016/0167-577X(94)90211-9).

Brankovic, Z., Milosevic, O., Uskokovic, U., Poleti, D. & Karanovic, L. 1994, "Nanostructured constituents of ZnO-based varistors prepared by mechanical attrition", Nanostructured Materials, vol. 4, no. 2, pp. 149-157 (doi:10.1016/0965-9773(94)90074-4).

Milosevic, O., Jordovic, B. & Uskokovic, D. 1994, "Preparation of fine spherical ZnO powders by an ultrasonic spray pyrolysis method", Materials Letters, vol. 19, no. 3-4, pp. 165-170, doi:10.1016/0167-577X(94)90063-9.

Novakovic, R., Atanasovska, M., Nikolic, M.V. & Ristic, M.M. 1994, "Influence of the cordierite phase on electric properties of the MgO-Al2O3-SiO2 ceramic system", InterCeram: International Ceramic Review, vol. 43, no. 6, pp. 464-465.

Poleti, D., Vasović, D., Karanović, L. & Branković, Z. 1994, "Synthesis and Characterization of Ternary Zinc-Antimony-Transition Metal Spinels", Journal of Solid State Chemistry, vol. 112, no. 1, pp. 39-44 (doi:10.1006/jssc.1994.1261).

Uskokovic, D.P. 1994, "Powder processing in the Institute of Technical Sciences, Belgrade", International Journal of Powder Metallurgy (Princeton, New Jersey), vol. 30, no. 4, pp. 375-384.

Uskokovic, D.P. 1994, "Shock compaction of aluminium alloys", Metal Powder Report, vol. 49, no. 10, pp. 18-22 (doi:10.1016/0026-0657(94)90321-2).

Zdujić, M., Poleti, D., Karanović, L., Kobayashi, K.F. & Shingu, P.H. 1994, "Intermetallic phases produced by the heat treatment of mechanically alloyed AlMo powders", Materials Science and Engineering A, vol. 185, no. 1-2, pp. 77-86 (doi:10.1016/0921-5093(94)90930-X).

1993

Despic, A.R. & Trisovic, T.L. 1993, "Transition layer thickness in microlaminar deposits", Journal of Applied Electrochemistry, vol. 23, no. 6, pp. 662-668 (doi:10.1007/BF00721959).

Jović, V.D., Jović, B.M. & Despić, A.R. 1993, "Identification of phases in Ag + Pd alloys electrodeposited by the electrochemical ALSV technique", Journal of Electroanalytical Chemistry, vol. 357, no. 1-2, pp. 357-372 (doi:10.1016/0022-0728(93)80391-T).

Milosavljevic, Z., Milosevic, O., Uskokovic, D., Vasovic, D., Poleti, D. & Karanovic, L. 1993, "Novel approach to control of ZnO-based varistor microstructures at nanometre level", Materials Science and Engineering A, vol. A168, no. 2, pp. 253-256 (doi:10.1016/0921-5093(93)90737-Y).

Milosevic, O. & Uskokovic, D. 1993, "Synthesis of BaTiO3 and ZnO varistor precursor powders by reaction spray pyrolysis", Materials Science and Engineering A, vol. A168, no. 2, pp. 249-252 (doi:10.1016/0921-5093(93)90736-X).

Milosević, O., Uskoković, D., Karanović, L.J., Tomašević-Čanović, M. & Trontelj, M. 1993, "Synthesis of ZnO-based varistor precursor powders by means of the reaction spray process", Journal of Materials Science, vol. 28, no. 19, pp. 5211-5217 (doi:10.1007/BF00570066)

Vukcevic, M., Glisic, S. & Uskokovic, D. 1993, "Dynamic compaction of Al-Li-X powder obtained by a rotating electrode process", Materials Science and Engineering A, vol. A168, no. 1, pp. 5-10 (doi:10.1016/0921-5093(93)90261-C).

Zdujic, M., Skala, D., Karanovic, L., Krstanovic, M., Kobayashi, K.F. & Shingu, P.H. 1993, "Thermal behavior of mechanically alloyed Ni50Mo50 powders and associated kinetics of amorphous phase transformation", Materials Science and Engineering A, vol. A161, no. 2, pp. 237-246 (doi:10.1016/0921-5093(93)90518-J)

1992

Atanasoska, L., Naoi, K. & Smyrl, W.H. 1992, "XPS studies on conducting polymers: Polypyrrole films doped with perchlorate and polymeric anions", Chemistry of Materials, vol. 4, no. 5, pp. 988-994 (DOI: 10.1021/cm00023a012).

Despić, A.R., Marinović, V. & Jović, V.D. 1992, "Kinetics of deposition and dissolution of brass from the pyrophosphate-oxalate bath", Journal of Electroanalytical Chemistry, vol. 339, no. 1-2, pp. 473-488 (doi:10.1016/0022-0728(92)80468-J).

Grozdic, T.D., Aleksic, O.S., Tomic, M. & Uskokovic, D. 1992, "Integrated printed varistor", 6th Mediterranean Electrotechnical Conference, pp. 118-120.

Jović, V.D., Parsons, R. & Jovic, B.M. 1992, "Anion absorption on the (111) face of silver", Journal of Electroanalytical Chemistry, vol. 339, no. 1-2, pp. 327-337. (doi:10.1016/0022-0728(92)80461-C)

Mihelic, B., Dakic, M., Kjekic, R. & Uskokovic, D. 1992, "Processing of compact materials by the use of self-propagating high-temperature synthesis and pseudo-hot isostatic pressing", Materials Letters, vol. 13, no. 6, pp. 391-395 (doi:10.1016/0167-577X(92)90075-U).

Stevanović, J., Skibina, L., Stefanović, M., Despić, A. & Jović, V.D. 1992, "Phase-structure analysis of brass by anodic linear-sweep voltammetry", Journal of Applied Electrochemistry, vol. 22, no. 2, pp. 172-178 (doi:10.1007/BF01023820).

Zdujic, M.V., Milosevic, O.B. & Karanovic, L.C. 1992, "Mechanochemical treatment of ZnO and Al2O3 powders by ball milling", Materials Letters, vol. 13, no. 2-3, pp. 125-129 (doi:10.1016/0167-577X(92)90122-Z).

Zdujic, M.V., Kobayashi, K.F. & Shingu, P.H. 1992, "Preparation of amorphous Ni-50 at.% Mo alloy powder by mechanical alloying", Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, vol. 83, no. 2, pp. 136-139.

1991

Avramov-Ivić, M.L., Leger, J.M., Lamy, C., Jović, V.D. & Petrović, S.D. 1991, "The electro-oxidation of glycerol on the gold(100)-oriented single-crystal surface and poly crystalline surface in 0.1 M NaOH", Journal of Electroanalytical Chemistry, vol. 308, no. 1-2, pp. 309-317 (doi:10.1016/0022-0728(91)85075-Z).

Jovalekic, C., Atanasoska, L., Petrovic, V. & Ristic, M.M. 1991, "Sintering and characterization of Bi4Ti3O12 ceramics", Journal of Materials Science, vol. 26, no. 13, pp. 3553-3564 (doi:10.1007/BF00557144).

Jovic, V.D., Spaic, S., Despic, A.R., Stevanovic, S. & Pristavec, M. 1991, "Identification of intermetallic compounds in thin layers of electrodeposited Cu-Cd alloys using electrochemical techniques", Materials Science and Technology, vol. 7, no. 11, pp. 1021-1029.

Zdujic, M.V., Kobayashi, K.F. & Shingu, P.H. 1991, "Structural changes during mechanical alloying of elemental aluminium and molybdenum powders", Journal of Materials Science, vol. 26, no. 20, pp. 5502-5508 (doi:10.1007/BF02403949).

1990

Atanasoska, L., Anderson, S.G., Meyer III, H. & Weaver, J. 1990, "XPS study of chemical bonding at polyimide interfaces with metal and semiconductor overlayers", Vacuum, vol. 40, no. 1-2, pp. 85-90 (doi:10.1016/0042-207X(90)90126-J).

Atanasoska, L., Atanasoski, R.T., Pollak, F.H. & O'Grady, W.E. 1990, "Single crystal RuO2/Ti and RuO2/TiO2 interface: LEED, Auger and XPS study", Surface Science, vol. 230, no. 1-3, pp. 95-112 (doi:10.1016/0039-6028(90)90019-5).

Atanasoska, L., Atanasoski, R. & Trasatti, S. 1990, "XPS and AES study of mixed layers of RuO2 and IrO2", Vacuum, vol. 40, no. 1-2, pp. 91-94.

Despić, A.R., Dražić, D.M., Balakšina, J., Gajić-Krstajić, L. & Stevanović, R.M. 1990, "Investigation of oxidation potentials of substances accumulated during cathodic polarization of aluminium", Electrochimica Acta, vol. 35, no. 11-12, pp. 1747-1755 (doi:10.1016/0013-4686(90)87075-D).

Jovic, V.D., Jovic, B.M. & Despic, A.R. 1990, "Influence of solution composition on lead, cadmium and thallium underpotential deposition on (111) oriented silver single crystal surfaces", Journal of electroanalytical chemistry and interfacial electrochemistry, vol. 288, no. 1-2, pp. 229-243 (doi:10.1016/0022-0728(90)80037-7).

Jović, V.D., Jović, B.M. & Parsons, R. 1990, "Acetate adsorption on the (111) oriented silver single crystal surface", Journal of Electroanalytical Chemistry, vol. 290, no. 1-2, pp. 257-262 (doi:10.1016/0022-0728(90)87435-M).

Susic, M.V., Mihelic, B. & Uskokovic, D.P. 1990, "Crystallization kinetics and thermal stability of shock-compacted amorphous Ni78P22", Materials Letters, vol. 9, no. 5-6, pp. 215-218 (doi:10.1016/0167-577X(90)90133-7).

Vlasova, M.V., Kakazey, N.G., Milosevic, O., Uskokovic, D.P., Poleti, D. & Vasovc, D. 1990, "Electronic paramagnetic resonance (EPR) study of the structure of ZnO varistors prepared by various chemical methods", Journal of Materials Science, vol. 25, no. 10, pp. 4324-4330 (doi:10.1007/BF00581091).

Zdujić, M. & Uskoković, D. 1990, "Production of atomized metal and alloy powders by the rotating electrode process", Soviet Powder Metallurgy and Metal Ceramics, vol. 29, no. 9, pp. 673-683 (doi:10.1007/BF00795571).

Zdujic, M., Kobayashi, K.F. & Shingu, P.H. 1990, "Mechanical alloying of Al-3 at.% Mo powders", Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, vol. 81, no. 5, pp. 380-385.

1989

Angelinetta, C., Trasatti, S., Atanasoska, L.D., Minevski, Z.S., Atanasoski, R.T. 1989, "Effect of preparation on the surface and electrocatalytic properties of RuO2 + IrO2 mixed oxide electrodes", Materials Chemistry and Physics, vol. 22, no 1-2, pp. 231-247.(doi:10.1016/0254-0584(89)90039-4)

Bilen, B. 1989, "Improved efficiency with hydrodynamics.", OLEODIN.PNEUM., vol. 30, no. 6 , Jan. 1989, pp. 59-61.

Jovic, V.D., Despic, A.R., Stevanovic, J.S. & Spaic, S. 1989, "Identification of intermetallic compounds in electrodeposited copper-cadmium alloys by electrochemical techniques", Electrochimica Acta, vol. 34, no. 8, pp. 1093-1102 (doi:10.1016/0013-4686(89)87141-5).

Jovic, V.D. & Jovicevic, J.N. 1989, "Aluminium electrodeposition from AlCl3-NaCl melts on glassy carbon, platinum and gold electrodes", Journal of Applied Electrochemistry, vol. 19, no. 2, pp. 275-280 (doi:10.1007/BF01062312).

Kozlowski, M., Smyrl, W.H., Atanasoska, L. & Atanasoski, R. 1989, "Local film thickness and photoresponse of thin anodic TiO2 films on polycrystalline titanium", Electrochimica Acta, vol. 34, no. 12, pp. 1763-1768 (doi:10.1016/0013-4686(89)85062-5).

Ristic, M.M., Pryadko, l.F., Stefanovic, D.C.,1989, "Sintering on the electronic level", Key Engineering Materials, vol. 29-31, pp. 89-93.

Susic, M., Zdujic, M., Karanovic, L. & Uskokovic, D. 1989, "Crystallization kinetics of partially crystallized Ti-5 Al powders obtained by rotating electrode process", Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, vol. 80, no. 7, pp. 497-501.

1988

Adžić, G.D., Despić, A.R. & Dražić, D.M. 1988, "Nucleation rings of Ag7O8NO3 around dissolving silver crystals", Journal of Electroanalytical Chemistry, vol. 241, no. 1-2, pp. 353-359 (doi:10.1016/0022-0728(88)85138-6).

Adžić, G.D., Dražić, D.M. & Despić, A.R. 1988, "A method of obtaining a small number of nucleation sites and growing large crystal grains", Journal of Electroanalytical Chemistry, vol. 239, no. 1-2, pp. 107-111 (doi:10.1016/0022-0728(88)80272-9).

Atanasoska, L., O'Grady, W.E., Atanasoski, R.T. & Pollak, F.H. 1988, "The surface structure of RuO2: A leed, auger and XPS study of the (110) and (100) faces", Surface Science, vol. 202, no. 1-2, pp. 142-166 (doi:10.1016/0039-6028(88)90066-0).

Bilen, B. 1988, "Increased efficiency with hydraulics.", REXROTH INF.Q., no. 4, pp. 9-11.

Despić, A.R., Dražić, D.M. & Gajić-Krstajić, Lj. 1988, "Effect of the addition of chloride on the anodic dissolution of aluminium through barrier films", Journal of Electroanalytical Chemistry, vol. 242, no. 1-2, pp. 303-315 (doi:10.1016/0022-0728(88)80259-6).

Jovic, V.D., Zejnilovic, R.M., Despic, A.R. & Stevanovic, J.S. 1988, "Characterization of electrochemically formed thin layers of binary alloys by linear sweep voltammetry", Journal of Applied Electrochemistry, vol. 18, no. 4, pp. 511-520, DOI: 10.1007/BF01022244.

Kostić, P., Milosević, O., Uskoković, D. & Ristić, M.M. 1988, "Potential barrier degradation at the grain boundary of ZnO-based nonlinear resistors", Physica B+C, vol. 150, no. 1-2, pp. 175-178 (doi:10.1016/0378-4363(88)90120-9).

Ristic, M.M., Pryadko, L.F., Dzyuba, V.V. & Linnik, V.P. 1988, "Influence of energetic concurrence of s and d electrons of formation of electronic structure of transition metals", Science of sintering, vol. 20, no. 2, pp. 7-23.

Smith, C.P., Maeda, M., Atanasoska, L., White, H.S. & McClure, D.J. 1988, "Ultrathin platinum films on mica and the measurement of forces at the platinum/water interface", Journal of Physical Chemistry, vol. 92, no. 1, pp. 199-205 (doi:10.1021/j100312a044).

Šušić, M.V. & Uskoković, D.P. 1988, "Crystallization kinetics of amorphous Ni78P22 powders and hydrogen adsorption on both amorphous and crystal alloy powders", Journal of Materials Science, vol. 23, no. 11, pp. 4076-4080 (doi:10.1007/BF01106838).

Verhoturov, A.D., Podchernyaeva, I.A. & Ristic, M.M. 1988, "Influence of dispersed particles on the sintering process of the surface layer during electric spark alloying method", Science of sintering, vol. 20, no. 2, pp. 137-141.

1987

Adžić, G., Despić, A.R. & Dražić, D.M. 1987, "Nucleation rings around a growing crystal", Journal of Electroanalytical Chemistry, vol. 220, no. 1, pp. 169-172 (doi:10.1016/0022-0728(87)88012-9).

Arsentyeva, I.P., Stefanovic, D.C., Petrovic, V., Sokic, M., Pryadko, L.F. & Ristic, M.M. 1987, "Contribution to Electron Theory on Metal Powders Consolidation”, Sintering ’85, ed by G. C. Kuczynski, D. P. Uskoković, Hayne Palmour III and M. M. Ristić, New York: Plenum Press, pp. 53–57.

Kostic, P., Milosevic, O., Uskokovic, D. & Ristic, M.M. 1987, "Potential Barrier Degradation at the Grain Boundary of ZnO-Based Nonlinear Resistors”, Physica B: Physics of Condensed Matter & C: Atomic, Molecular and Plasma Physics, Optics, vol. 150, no. 1-2, pp. 175-178.

Mil'man, Y.V., Ristic, M.M., Gridneva, I.V., Lotsko, D.V., Kristanovich, I. & Goncharuk, V.A. 1987, "Structure and hardness of sintered Mo-Ni alloys", Soviet Powder Metallurgy and Metal Ceramics, vol. 26, no. 2, pp. 144-148.

Ristic, M.M. & Dragojevic-Nesic, M.J. 1987, "New Approach for the Description of the Initial-Stage Kinetics During Amorphous Materials Sintering”, Powder Technology, vol. 49, no. 2, pp. 189-190.

Ristic, M.M. & Dragojevic-Nesic, M.J. 1987, "Densification kinetics during sintering of materials by a flow mechanism", Journal of Materials Science Letters, vol. 6, no. 9, pp. 1091-1092.

Ristic, M.M., Skripnik, F.V. & Pryadko, L.F. 1987, "Estimation of physical properties of transition metals based on a configuration model of solids", Monatshefte fuer Chemie Chemical Monthly, vol. 118, no. 3, pp. 323-328 (doi:10.1007/BF00809942).

Shcherba, I.D., Nikolaev, L.I. & Ristic, M.M. 1987, "X-Ray Spectra and Chemical Bond of Fe-Al-Si Alloys”, Science of sintering, vol. 19, no. 2, pp. 101-104.

1986

Angelinetta, C., Trasatti, S., Atanososka, Lj.D., Atanasoski, R.T. 1986, "Surface properties of RuO2 + IrO2 mixed oxide electrodes", Journal of Electroanalytical Chemistry, vol. 214, no. 1-2, pp. 535-546. (doi:10.1016/0022-0728(86)80122-X)

Krstanović, I., Radaković, A., Radić, S.M. & Ristić, M.M. 1986, "Crystallographic state of the CdO lattice during sintering with added Bi2O3", Journal of Materials Science, vol. 21, no. 12, pp. 4185-4187 (doi:10.1007/BF01106528).

Ristic, M.M., Radic, S.M. & Vukcevic, V. 1985, "PROBLEMS IN THE NOMENCLATURE AND SYMBOLS OF SINTERING THERMODYNAMICS”, Science of Sintering, vol. 18, no. 2-3, pp. 107-110.

Shcherba, I.D., Gorelenko, Y.G., Dutchak, Y.J. & Ristic, M.M. 1986, "X-Ray Spectra and Electronic Structure of R//2Co//3Si//5 Type Compounds (R Equvlnt Y, Gd, Tb, Dy)”, Journal of the less-common metals, vol. 123, no. 1-2, pp. 85-88.

Zdujic, M., Petrovic, V. & Uskokovic, D. 1986, "Investigation of Metal Powder Preparation by Rotating Electrode Process”, in Horizons in Powder Metallurgy, ed. by W. A. Kaysser and W. J. Huppmann, Freiburg: verlag Schmid, pp. 61

Zdujic, M., Sokic, M., Petrovic, V. & Uskokovic, D. 1986, "Study of Properties and Cooling Rates of Steel Powders Obtained by Rotating Electrode Process”, Powder Metallurgy International, vol. 18, no. 5, pp. 325-329.

Zdujic, M., Sokic, M., Petrovic, V. & Uskokovic, D. 1986, "Study of Properties and Cooling Rates of Steel Powders Obtained By Rotating Electrode Process”, Powder Metallurgy International, vol. 18, no. 4, pp. 275-277.

1985

Atanasoska, L. 1985, "INTERACTION STUDY AT RuO//2/Ti INTERFACE", Science of Sintering, vol. 18, no. 2-3, pp. 103-106.

Atanasoska, L.D., Drazic, D.M., Despic, A.R. & Zalar, A. 1985, "Chloride Ion Penetration into Oxide Films on Aluminum Auger and XPS Studies”, Journal of electroanalytical chemistry and interfacial electrochemistry, vol. 182, no. 1, pp. 179-186.

Atanasoska, L.D., Ristic, M.M. & O'Grady, W.E. 1985, "Ruthenium Oxide Single Crystal-Titanium Interface (110) And (100) Surface; A Study by Means of LEED, AES and XPS Techniques”, Vacuum, vol. 37, no. 1-2, pp. 195.

Atanasoska, L.D. & Zalar, A. 1985, "AES AND XPS STUDIES OF Cl** minus ION PENETRATION AND THE CHEMICAL COMPOSITION OF OXIDE FILMS ON ALUMINIUM.", Vacuum, vol. 37, no. 1-2, pp. 197.

Jović, V.D., Jovićević, J.N. & Despić, A.R. 1985, "The influence of adsorbing substances on the UPD of lead onto the (111)-oriented silver single crystal surface-II", Electrochimica Acta, vol. 30, no. 11, pp. 1455-1464 (doi:10.1016/0013-4686(85)80006-2).

Kiparisov, S.S., Beskin, A.L. & Ristic, M.M. 1985, "Obtaining of Titanium Powder by Ore Concentrates Treatment”, Science of Sintering, vol. 17, no. 3, pp. 139-144.

Kushtalova, I.P., Stasyuk, L.F., Kuzikov, E.D., Radic, S.M. & Ristic, M.M. 1985, "RELATION BETWEEN STRUCTURE AND PROPERTIES IN COMPOSITE MATERIALS BASED ON Ni-Ti ALLOY THAT CONTAIN DIAMOND”, Science of Sintering, vol. 17, no. 3, pp. 193-198.

Pantic, D., Uskokovic, D., Pavicevic, M.K. & Ristic, M.M. 1985, "FUNCTIONAL DEFINITION OF THE EQUATION OF THE SINTERING PROCESS”, Modern Developments in Powder Metallurgy 15, pp. 275-277.

Petrovic, V., Radic, S.M., Uskokovic, D. & Ristic, M.M. 1985, "CONTRIBUTION TO INVESTIGATION OF GRAIN GROWTH DURING OXIDES SINTERING”, Science of Sintering, vol. 17, no. 1-2, pp. 81-85.

Ristic, M.M. 1985, "CHANGE OF ACTIVATION VOLUMES DURING SINTERING", in Powder Metallurgy and Related High Temperature Materials, ed. by Ramakrishnan, New Delhi, Oxford and IBH, pp. 71-74.

Stojiljkovic, Z., Novakovic, R., Milosevic, O. & Bozovic, Z. 1985, "MULTIPARAMETRIC ANALYSIS OF SINTERING OF VARISTORS BASED ON ZnO”, Science of Sintering, vol. 18, no. 203, pp. 97-101.

Uskokovic, D., Kostic, P., Milosevic, O., Petrovic, V. & Ristic, M.M. 1985, "Study of Electrical Properties and Microstructure of Non-Ohmic ZnO CERAMICS", in Powder Metallurgy and Related High Temperature Materials, ed. by Ramakrishnan, Oxford and IBH, pp. 193-208.

Vlasova, M.V., Kakazey, N.G., Kostić, P., Milosević, O. & Uskoković, D. 1985, "EPR study of the influence of defect structure on electrical properties of ZnO varistors", Journal of Materials Science, vol. 20, no. 5, pp. 1660-1670 (doi:10.1007/BF00555269).

1984

Arsentyeva, I.P. & Ristic, M.M. 1984, "Investigation of the Bond in Ni-Al//2O//3 System”, Materials Science Monographs, pp. 181-186.

Duzevic, D., Petrovic, V. & Ristic, M.M. 1984, "Compacting Phenomenology of Coarse Titanium Powders”, Science of Sintering, vol. 16, no. 1, pp. 21-28.

Kostic, P., Milosevic, O. & Uskokovic, D. 1984, "Influence of Doping on Electrical Properties of ZnO Varistors”, Science of Sintering, vol. 16, no. 2, pp. 127-133.

Krstanovic, I., Petrovic, V., Radic, S.M., Stefanovic, D., Uskokovic, D. & Ristic, M.M. 1984, "Influence of Al//2O//3 on Formation of Microstructural Constituents in Cu-Al//2O//3 System”, Materials Science Monographs, pp. 187-195.

Kushtalova, I., Krstanovic, I., Stasyk, I., Radic, S.M. & Ristic, M.M. 1984, "Reactive Sintering of Diamond-Titanium System Under High Pressure”, Materials Science Research 16, pp. 171-179.

Kushtalova, I.P. & Ristic, M.M. 1984, "RECRYSTALLIZATION OF REFRACTORY MATERIALS - II. KINETICS OF RECRYSTALLIZATION.", Science of Sintering, vol. 16, Spec. issue, pp. 115-117. (https://doi.org/10.1007/978-1-4613-2761-5_13)

Kushtalova, I.P. & Ristic, M.M. 1984, "RECRYSTALLIZATION OF REFRACTORY MATERIALS - II. KINETICS OF RECRYSTALLIZATION.", Science of Sintering, vol. 16, Spec. issue, pp. 115-117.

Nesic, M. 1984, "Study Of Ethylcellulose Sintering Mechanism”, Science of Sintering, vol. 16, no. 2, pp. 115-120.

Notis, M., Radic, S.M., Ristic, M.M., Spriggs, R.M. & Zivanovic, B. 1984, "COLD PRESSING OF NICKEL OXIDE POWDERS”, Science of Sintering, vol. 16, no. 2, pp. 135-138.

O'Grady, W.E., Atanasoska, L., Pollak, F.H. & Park, H.L. 1984, "Single crystal RuO2 (110): Surface structure", Journal of Electroanalytical Chemistry, vol. 178, no. 1, pp. 61-68 (doi:10.1016/S0022-0728(84)80023-6).

Petrovic, V., Radic, S.M., Uskokovic, D. & Ristic, M.M. 1984, "BEHAVIOUR OF SINTERED Al//2O//3 IN VACUUM AT HIGH TEMPERATURES”, Science of Sintering, vol. 16, Spec. issue, pp. 119-121.

Petrovic, V., Stanisic, G., Radic, S.M. & Ristic, M.M. 1984, "GRAIN GROWTH AFTER PRIMARY RECRYSTALLIZATION IN SINTERED ZINC OXIDE”, Science of Ceramics 12, pp. 335-340.

Ristic, M.M. 1984, "CHANGE OF ACTIVATION VOLUME DURING SINTERING”, Science of Sintering, vol. 16, no. 2, pp. 73-76.

Ristic, M.M. 1984, "Re-utilization of wastes in the tile and other ceramic industries", InterCeram: International Ceramic Review, vol. 33, no. 3, pp. 31-32.

Ristic, M.M., Krstanovic, I., Timofeyeva, I.I. & Uskokovic, D. 1984, "STRUCTURE OF CADMIUM OXIDE UNDER PRESSURE”, Science of Sintering, vol. 16, Spec. issue, pp. 71-73.

Ristic, M.M., Stefanovic, D., Pryadko, L.F., Pryadko, I.F., Borisenko, E.G., Petrus, Y.F. & Smolin, M.D. 1984, "On the Character of Mutual Links between the Electronic and Fine Crystal Structure in Alloys of Zn-Nb and W-Re Type”, Science of Sintering, vol. 16, Special Issue, pp. 51-53.

Skorokhod, V.V., Panichkina, V.V., Pavicevic, M., Uskokovic, D. & Ristic, M.M. 1984, "REDISTRIBUTION OF NICKEL DURING ACTIVATED SINTERING OF TUNGSTEN WITH NICKEL ADDITIVE”, Science of Sintering, vol. 16, no. 1, pp. 7-12.

Stanisic, G., Krstanovic, I. & Ristic, M.M. 1984, "INVESTIGATION OF THE ZnO-Bi//2O//3 SYSTEM: QUANTITATIVE DIFFERENTIAL THERMAL ESTIMATION”, Science of Ceramics 12, pp. 209-212.

Stefanovic, D.C., Arsentjeva, I.P. & Ristic, M.M. 1984, "CONTRIBUTION TO THE STUDY OF CONSOLIDATION OF PRECIPITATION STRENGTHENED MATERIALS”, Materials Science Research 16, pp. 341-346. (https://doi.org/10.1007/978-1-4613-2761-5_25)

Timofeyeva, I.I. & Ristic, M.M. 1984, "INFLUENCE OF HIGH PRESSURES ON BEHAVIOUR OF IONIC-COVALENT COMPOUNDS”, Materials Science Monographs, pp. 19-24.

Uskokovic, D., Kostic, P., Milosevic, O., Petrovic, V. & Ristic, M.M. 1984, "STUDY OF ELECTRICAL PROPERTIES AND MICROSTRUCTURE OF NON-OHMIC ZnO CERAMICS”, Materials Science Monographs, pp. 513-532.

1983

Drazic, D.M., Despic, A.R., Gajic, L. & Atanasoska, L. 1983, "pH DEPENDENCE OF ANODIC BEHAVIOUR OF ALUMINIUM IN CHLORIDE SOLUTIONS", Extended Abstracts, 34th Meeting - International Society of Electrochemistry, Erlangen, 3 p.

Duzevic, D. & Ristic, M.M. 1983, "Quasimelt Closing the Frame of a General Concept of Basic Local Melting Consolidation Processes”, Science of Sintering, vol. 15, no. 3, pp. 113-120.

Milosevic, O., Kostic, P., Petrovic, V. & Uskokovic, D. 1983, "Study of the Grain Growth and Electric Properties of ZnO Varistor Ceramics”, Science of Sintering, vol. 15, no. 3, pp. 121-130.

Vlasova, M.V., Gorbachuk, S.I., Kakazei, N.G. & Ristić, M.M. 1983, "EPR study of the pressing process of polycrystalline MgO", Journal of Materials Science, vol. 18, no. 1, pp. 245-249 (doi:10.1007/BF00543831).

Drazic, D.M., Despic, A.R., Gajic, L. & Atanasoska, L. 1983, "pH DEPENDENCE OF ANODIC BEHAVIOUR OF ALUMINIUM IN CHLORIDE SOLUTIONS", Extended Abstracts, 34th Meeting - International Society of Electrochemistry, Erlangen, 3 p.

Duzevic, D. & Ristic, M.M. 1983, "Quasimelt Closing the Frame of a General Concept of Basic Local Melting Consolidation Processes”, Science of Sintering, vol. 15, no. 3, pp. 113-120.

Milosevic, O., Kostic, P., Petrovic, V. & Uskokovic, D. 1983, "Study of the Grain Growth and Electric Properties of ZnO Varistor Ceramics”, Science of Sintering, vol. 15, no. 3, pp. 121-130.

Vlasova, M.V., Gorbachuk, S.I., Kakazei, N.G. & Ristić, M.M. 1983, "EPR study of the pressing process of polycrystalline MgO", Journal of Materials Science, vol. 18, no. 1, pp. 245-249 (doi:10.1007/BF00543831).

1982

Arsentjeva, I.P., Stefanovic, D., Mikijelj, V., Pavicevic, M. & Ristic, M.M. 1982, "Sintering in the Nickel-Alumina System”, Materials Science Monographs 14, pp. 283-289.

Gramatikov, D.D., Milosevski, M.I. & Ristic, M.M. 1982, "Growth of Isolated Macropores in a Silica Ceramic”, Materials Science Monographs 14, pp. 329-334.

Milosevski, M.I., Stefanovic, D. & Ristic, M.M. 1982, "Changes in Dislocation and Electronic Structure during Copper Consolidation”, Materials Science Monographs 14, pp. 453-459.

Nikolic, Z.S. & Ristic, M.M. 1982, "Computer Simulation of Geometry Change during Liquid Phase Sintering”, Materials Science Monographs 14, pp. 477-481.

Nilosevski, M., Stefanovic, D.S., Zivkovic, L. & Ristic, M.M. 1982, "Changes of Electron Properties of Cu During the Consolidation in Hydrogen Atmosphere”, Science of Sintering, vol. 14, no. 3, pp. 105-108.

Ristic, M.M. 1982, "Contemporary Development of the Science of Sintering”, Materials Science Monographs 14, pp. 1-15.

Stefanovic, D.C. & Ristic, M.M. 1982, "Effects of Pressing Process on Sintering Process and Final Compact Properties”, Materials Science Monographs 14, pp. 431-437.

STEFANOVIC, D., RISTIC, M.M. & PETROVIC, V. 1982, "Solid-State Electron-Configuration Model for Sintering of the Zr-Nb System”, High Temp High Pressures, vol. V 14, no. N 1, pp. 11-20.

Stojilkovic, S.M., Zivkovic, L.J.M., Ristic, M.M. & Nikolic, Z.S. 1982, "Contribution to the Study of Annihilation of Defects by Electrical Resistivity Measurements”, Science of Sintering, vol. 14, no. 2, pp. 57-60.

Trefilov, V.I., Ristic, M.M., Milman, J.V., Uskokovic, D.P. & Gridneva, I.V. 1982, "Influence of Structure Parameters on Strength and Fracture Toughness of Brittle Covalent Crystals and Corresponding Sintered Materials”, Materials Science Monographs 14, pp. 497-504.

Uskokovic, D., Novakovic, B., Petrovic, V. & Ristic, M.M. 1982, "Influence of Particle Size on Intermediate and Final Stages of Molybdenum Sintering”, Materials Science Monographs 14, pp. 69-74.

Zivkovic, L.M. & Ristic, M.M. 1982, "Grain Growth in Alumina Derived From Gels”, Materials Science Monographs 14, pp. 257-262.

Zivkovic, L.M. & Ristic, M.M. 1982, "Some Problems of Fabrication of Ceramics for Electronics”, Science of Sintering, vol. 14, no. 3, pp. 99-103.

1981

Nikolic, Z.S. & Ristic, M.M. 1981, "Modeling of the Liquid Phase Sintering”, Science of Sintering, vol. 13, no. 2, pp. 91-102.

Nikolic, Z.S., Ristic, M.M. & Huppman, W.J. 1981, "Simple Method for Computer Simulation of Liquid Phase Sintering”, Modern Developments in Powder Metallurgy 12, pp. 497-502.

Stefanovic , D.C. , Petrovic, V. & Ristic, M.M. 1981, "Contribution to Electronic Theory of Consolidation Process”, Modern Developments in Powder Metallurgy 12, pp. 235-242.

Stefanovic , D.C. & Ristic, M.M. 1981, "Consolidation of Dispersive Powders during the Pressing Process”, Powder Technology, vol. 30, no. 1, pp. 37-50 (doi:10.1016/0032-5910(81)85025-5).

Zivkovic, L., Nikolic, A. & Ristic, M. 1981, "Application of Sintering Diagrams to the Sintering Of Alumina Gels”, Science of Ceramics 11, pp. 257-264.

1980

Nikolic, Z.S., Ristic, M.M. & Huppmann, W.J. 1980, "Application of Numerical Method for Grain Growth Analysis During Liquid Phase Sintering”, Science of Sintering, vol. 12, no. 1, pp. 19-23.

Petrovic, V. & Ristic, M.M. 1980, "Isochronal and Isothermal Grain Growth During Sintering of Cadmium Oxide”, Metallography, vol. 13, no. 4, pp. 319-327 (doi:10.1016/0026-0800(80)90029-4).

Stefanovic, D.C., Petrovic, V. & Ristic, M.M. 1980, "Contribution to Electronic Theory of Consolidation Process”, Science of Sintering, vol. 12, no. 3, pp. 147-154.

Vlasova, M., Grigorjev, B.A., Kakazei, N.G., Kuksa, P.B. & Ristic, M.M. 1980, " Characteristics of crystallochemical transformations in clays during thermal treatment [Russian with English abstract]", Bulletin de la Societe Chimique (Beograd), vol. 45, no. 11, pp. 565-575.

Vlasova, M.V., Kakazey, N.G., Kosolapova, T.Y., Makarenko, G.N., Marek, E.V., Uskoković, D. & Ristić, M.M. 1980, "The structure of paramagnetic centres and the formation of defects in the B-C, B-C-Ti and B-C-Cr systems", Journal of Materials Science, vol. 15, no. 4, pp. 1041-1048 (doi: 10.1007/BF00552118).

1979

Ristic, M.M. 1979, "Basic Equation of Chemical Kinetics by M. Petrovic and the Kinetics of Solid State Processes”, Science of Sintering, vol. 11, no. 3, pp. 215-218.

Uskokovic, D., Nikolic, Z. & Ristic, M.M. 1979, "Analysis of Metals Sintering from the Standpoint of Sintering Maps”, Science of Sintering, vol. 11, no. Spec Issue, pp. 59-84.

1978

Radonjic, B., Zivkovic, P. & Uskokovic, D. 1978, "On the Mechanism and Factors Affecting Grain Refinement of Aluminium by Al-Ti5-Bl Alloy”, Underground Space, vol. 3, pp. 302-322.

Ristic, M.M., Stefanovic, D., Milosevski, M. & Radic, S.M. 1978, "Influence of pressing pressure on the consolidation process", Science of Sintering, vol. 10, no. Spec Issue, pp. 129-133.

Samsonov, G.V. & Ristic, M.M. 1978, "Perspective of General Sintering Theory Realization on Electronic Level.", Sci Sintering, vol. 10, no. Spec Issue, pp. 111-115.

Stanisic, G. & Ristic, M.M. 1978, "Effect of compacting pressure on the consolidation of dispersed CaO.", Science of Sintering, vol. 10, no. 2, pp. 129-132.

Susic, M.V., Petrovic, V., Ristic, M.M. & Petranovic, N. 1978, "Electric conductivity of some forms of sintered synthetic zeolites", Science of Sintering, vol. 10, no. 3, pp. 225-244.

Uskokovic, D., Nikolic, Z. & Ristic, M.M. 1978, "Analysis of the Sintering Process on the Basis of Sintering Maps”, Sci Sintering, vol. 10, no. Spec Issue, pp. 149-156.

1977

Duzevic, D. & Ristic, M.M. 1977, "ANISOTROPIE DES SCHRUMPFENS EINACHSIG GEPRESSTER METALLPULVER - PRESSLINGE BEIM SINTERN", Sprechsaal, vol. 110, no. 3.


1976

Grigorijev, B.A., Petrovic, V., Uskokovic, D. & Ristic, M.M. 1976, "Influence of Mangan Ion Valency State on Formation of Microstructural Constituents During Sintering of Magnesium Oxide", Metallography, vol. 9, no. 4, pp. 293-298 (doi:10.1016/0026-0800(76)90055-0).

1975

Uskokovic, D., Delic, D. & Ristic, M.M. 1975, "Sintering of Carbonyl Iron Powder in Alpha -Region”, Int J Powder Metall Powder Technol, vol. 11, no. 3, pp. 189-193.

Uskokovic, D., Petkovic, J. & Ristic, M.M. 1975, "Kinetics and Mechanism of the Initial Stage of Sodium Fluoride Sintering Under Non-Isothermal Conditions", Mater Sci Res, vol. 10, pp. 315-324.